EN 2591-501:2002

Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability

This standard specifies methods of verifying the solderability of electrical male and female contacts to be soldered in elements of connection and of contacts with self-contained solder and flux not accessible to a solder iron.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 501: Weichlöten

Diese Norm legt Verfahren zur Überprüfung der Lötbarkeit von elektrischen, in Verbindungselemente zu lötende Stift- und Buchsenkontakte sowie von Kontakten mit integriertem Lot und Flussmittel fest, die für einen Lötkolben nicht zugänglich sind.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 501: Brasage tendre

Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability

General Information

• Status: Published
• Publication Date: 18-Jun-2002
• Withdrawal Date: 30-Dec-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 2591-501:2004 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderabilityLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 501: WeichlötenSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 501: Brasage tendreAerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-501:2002SIST EN 2591-501:2004en01-maj-2004SIST EN 2591-501:2004SLOVENSKI
STANDARD



SIST EN 2591-501:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-501June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 501: Soft solderabilitySérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 501: Brasage tendreLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 501:WeichlötenThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-501:2002 ESIST EN 2591-501:2004



EN 2591-501:2002 (E)2ForewordThis document (EN 2591-501:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at the latest by December 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United KingdomSIST EN 2591-501:2004



EN 2591-501:2002 (E)31ScopeThis standard specifies methods of verifying the solderability of electrical male and female contacts to besoldered in elements of connection and of contacts with self-contained solder and flux not accessible to asolder iron.It shall be used together with EN 2591-100.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies.EN 2591-100Aerospace series – Elements of electrical and optical connection – Test methods –Part 100: General 1)EN 2591-101Aerospace series – Elements of electrical and optical connection – Test methods –Part 101: Visual examination3Preparation of specimens3.1The barrels of contacts to be soldered shall be tested in their delivery condition and shall notsuffer from contamination such as finger marks, traces of grease, etc.If the technical specification requires, the barrels of contacts to be soldered may be degreased by immersionat room temperature in a pH neutral organic solvent.3.2Unless specified in the technical specification, the following details shall be stated:–cleaning method (if applicable);–application time of bit if different from that pr
...