EN 14179-2:2005

Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard

This document specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Heißgelagertes thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm

Diese Europäische Norm legt Anforderungen an flaches, heißgelagertes thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas zur Anwendung im Bauwesen sowie die Konformitätsbewertung und die werkseigene Produktionskontrolle von derartigem Glas fest.
ANMERKUNG   Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungsanwendungen, können andere Richtlinien, z. B. die Niederspannungsrichtlinie, gelten.

Verre dans la construction - Verre de silicate sodo-calcique de sécurité trempé et traité Heat Soak - Partie 2: Evaluation de la conformité/Norme de produit

Steklo v gradbeništvu – HS-preskus kaljenega natrijevega-kalcijevega-silikatnega varnostnega stekla – 2. del: Ovrednotenje skladnosti/standard za izdelek

General Information

• Status: Published
• Publication Date: 17-May-2005
• Withdrawal Date: 29-Nov-2005
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129 - Glass in building
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 03-Dec-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN 14179-2:2005 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard

Relations

• Revised: FprEN 14179-2 - Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Product standard
• Effective Date: 26-Jul-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu – HS-preskus kaljenega natrijevega-kalcijevega-silikatnega varnostnega stekla – 2. del: Ovrednotenje skladnosti/standard za izdelekGlas im Bauwesen - Heißgelagertes thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/ProduktnormVerre dans la construction - Verre de silicate sodo-calcique de sécurité trempé et traité Heat Soak - Partie 2: Evaluation de la conformité/Norme de produitGlass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 14179-2:2005SIST EN 14179-2:2005en01-september-2005SIST EN 14179-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14179-2May 2005ICS 81.040.20English versionGlass in building - Heat soaked thermally toughened soda limesilicate safety glass - Part 2: Evaluation of conformity/ProductstandardVerre dans la construction - Verre de silicate sodo-calciquede sécurité trempé et traité Heat Soak - Partie 2: Evaluationde la conformité/Norme de produitGlas im Bauwesen - Heißgelagertes thermischvorgespanntes Kalknatron-Einscheibensicherheitsglas -Teil 2: Konformitätsbewertung/ProduktnormThis European Standard was approved by CEN on 24 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14179-2:2005: E

Factory Production Control.17 Annex B (normative)
Tests for factory production control.23 Annex C (informative)
Provisions for voluntary involvement of third party(ies).25 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of EU Construction Products Directive.26 Bibliography.34

– Basic soda lime silicate glass products – Part 4: Drawn sheet glass EN 572-5, Glass in building – Basic soda lime silicate glass products – Part 5: Patterned glass EN 673, Glass in Building – Determination of thermal transmittance (U value) – Calculation method EN 1063, Glass in Building – Security glazing – Testing and classification of resistance against bullet attack EN 1096-1, Glass in building – Coated glass – Part 1: Definitions and classification EN 1096-2, Glass in building – Coated glass – Part 2: Requirements and test methods for class A, B and S coatings EN 1096-3, Glass in building – Coated glass – Part 3: Requirements and test methods for class C and D coatings EN 1288-3, Glass in building – Determination of bending strength of glass – Part 3: Test with specimen supported at two points (four point bending) EN 12600, Glass in building – Pendulum test – Impact test method and classification for flat glass EN 12758, Glass in building – Glazing and airborne sound insulation – Product descriptions and determination of properties EN 12898, Glass in building – Determination of the emissivity EN 13501-1, Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests

using data from external fire exposure to roof tests EN 13541, Glass in building – Security glazing – Testing and classification of resistance against explosion pressure prEN 14179-1:2001, Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 1: Definition and description 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in prEN 14179-1:2001 and the following apply. 3.1
initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available, …), in accordance with this European Standard that demonstrates compliance with this European Standard 3.2
test report document that covers the results of tests undertaken on a representative sample of the product from production
or on a prototype design of the product 3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It includes specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic 4 Requirements 4.1 Product description For conformity purposes the heat soaked thermally toughened glass manufacturer is responsible for the preparation and maintenance of the product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of the heat soaked thermally toughened glass manufacturer or his agent except in the case of regulatory requirements. The description shall contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information:

EN 1096-1, EN 1096-2, EN 1096-3, when those properties are changed, intentionally or unintentionally, by the thermal toughening and heat soaking process. The definition of product families shall be consistent with the normative part of the product description. The substitution of materials shall maintain the conformity with the product description. The substituting material can be added to the product family and also the product description when compliance has been demonstrated. 4.2 Conformity with the definition of heat soaked thermally toughened soda lime silicate safety glass Products shall conform to the definition and fulfil the requirements of heat soaked thermally toughened soda lime silicate safety glass as defined in prEN 14179-1. 4.3 Determination of the characteristic’s performances 4.3.1 Characteristics of heat soaked thermally toughened soda lime silicate safety glass 4.3.1.1 General The characteristics of
...