EN IEC 60794-1-305:2023
(Main)Optical fibre cables - Part 1-305: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon tear (separability), Method G5
Optical fibre cables - Part 1-305: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon tear (separability), Method G5
IEC 60794-1-305:2023 describes test procedures to be used in establishing uniform requirements for optical fibre ribbons as optical fibre cable elements for the mechanical property-tear (separability). This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This test is applicable for edge-bonded ribbons and encapsulated ribbons specified in IEC 60794-1-31, and not intended to be used for partially-bonded ribbons.
Lichtwellenleiterkabel - Teil 1-305: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bänderriss (Trennbarkeit), Verfahren G5
Câbles à fibres optiques - Partie 1-305: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câble - Déchirure du ruban (séparabilité), Méthode G5
IEC 60794-1-305:2023 décrit les procédures d’essai à utiliser pour établir des exigences uniformes pour les rubans de fibres optiques en tant qu’éléments de câbles à fibres optiques pour la propriété mécanique de déchirement (séparabilité). Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés avec des équipements de communication et des dispositifs utilisant des techniques analogues, ainsi qu’aux câbles constitués à la fois de fibres optiques et de conducteurs électriques. NOTE Tout au long du présent document, l’expression "câble optique" peut également inclure des unités de fibres optiques, des unités de fibres pour microconduits, etc. Cet essai s’applique aux rubans liés par les bords et aux rubans encapsulés spécifiés dans l’IEC 60794-1-31, et n’est pas destiné à être utilisé pour les rubans partiellement collés.
Optični kabli - 1-305. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Vzdolžno trganje (ločljivost), metoda G5 (IEC 60794-1-305:2023)
Standard IEC 60794-1-305:2023 opisuje preskusne postopke, ki jih je treba uporabljati pri določanju enotnih zahtev glede trakastih kablov iz optičnih vlaken kot elementov kablov iz optičnih vlaken za mehansko lastnost – trganje (ločljivost). Dokument obravnava optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov. NOTE V tem dokumentu lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.
Ta preskus se uporablja za trakove, vezane na robovih, in enkapsulirane trakove, določene v standardu IEC 60794-1-31, in ni namenjen uporabi za delno vezane trakove.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60794-1-305:2023
01-april-2023
Optični kabli - 1-305. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Vzdolžno trganje
(ločljivost), metoda G5 (IEC 60794-1-305:2023)
Optical fibre cables - Part 1-305: Generic specification - Basic optical cable test
procedures - Cable element test methods - Ribbon tear (separability), Method G5 (IEC
60794-1-305:2023)
Lichtwellenleiterkabel - Teil 1-305: Allgemeine Festlegungen - Grundlegende
Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bänderriss
(Trennbarkeit), Verfahren G5 (IEC 60794-1-305:2023)
Câbles à fibres optiques - Partie 1-305: Spécification générique - Procédures
fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câble -
Déchirure du ruban (séparabilité), Méthode G5 (IEC 60794-1-305:2023)
Ta slovenski standard je istoveten z: EN IEC 60794-1-305:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-305:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-305:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-305:2023
EUROPEAN STANDARD EN IEC 60794-1-305
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2023
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-305: Generic specification - Basic
optical cable test procedures - Cable element test methods -
Ribbon tear (separability), Method G5
(IEC 60794-1-305:2023)
Câbles à fibres optiques - Partie 1-305: Spécification Lichtwellenleiterkabel - Teil 1-305: Allgemeine
générique - Procédures fondamentales d'essai des câbles Festlegungen - Grundlegende Prüfverfahren für
optiques - Méthodes d'essai des éléments de câble - Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente -
Déchirure du ruban (séparabilité), Méthode G5 Bänderriss (Trennbarkeit), Verfahren G5
(IEC 60794-1-305:2023) (IEC 60794-1-305:2023)
This European Standard was approved by CENELEC on 2023-02-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-305:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-305:2023
EN IEC 60794-1-305:2023 (E)
European foreword
The text of document 86A/2249/FDIS, future edition 1 of IEC 60794-1-305, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-305:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-11-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-02-08
document have to be withdrawn
This document supersedes (partially) EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-305:2023 was approved b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.