Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling

Presents the detailed requirements specific to simplex and duplex cables for use in premises cabling, to ensure compatibility with ISO 11801. The requirements of the family specification EN 60794-2-10 are applicable to cables covered by this standard.

Lichtwellenleiterkabel - Teil 2-11: LWL-Innenkabel - Bauartspezifikation für Simplex- und Duplexkabel zur Innenverlegung für anwendungsneutrale Standortverkabelung

Câbles à fibres optiques - Partie 2-11: Câbles intérieurs - Spécification particulière pour les câbles simplex et duplex utilisés dans le câblage de locaux

Présente les exigences spécifiques aux câbles à fibres optiques simplex et duplex destinés à être utilisés dans le câblage des locaux, dont l'objectif est d'assurer la compatibilité avec l'ISO 11801. Les exigences contenues dans la spécification de famille EN 60794-2-10 sont applicables aux câbles couverts par la présente norme.

Optični kabli – 2-11. del: Notranji kabli – Podrobna specifikacija za simpleksne in dupleksne kable za okabliranje delovnih prostorov (IEC 60794-2-11:2005)

General Information

Status
Withdrawn
Publication Date
14-Dec-2005
Withdrawal Date
30-Nov-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
19-Jun-2015
Completion Date
19-Jun-2015

Relations

Buy Standard

Standard
EN 60794-2-11:2006
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 60794-2-11:2006

STANDARD
marec 2006
Optični kabli – 2-11. del: Notranji kabli – Podrobna specifikacija za
simpleksne in dupleksne kable za okabliranje delovnih prostorov (IEC 60794-
2-11:2005)
Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex
and duplex cables for use in premises cabling (IEC 60794-2-11:2005)
ICS 33.180.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60794-2-11
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 33.180.10
English version
Optical fibre cables
Part 2-11: Indoor cables –
Detailed specification for simplex and duplex cables
for use in premises cabling
(IEC 60794-2-11:2005)
Câbles à fibres optiques Lichtwellenleiterkabel
Partie 2-11: Câbles intérieurs - Teil 2-11: LWL-Innenkabel -
Spécification particulière pour les câbles Bauartspezifikation für Simplex- und
simplex et duplex utilisés dans le câblage Duplexkabel zur Innenverlegung für
de locaux anwendungsneutrale Standortverkabelung
(CEI 60794-2-11:2005) (IEC 60794-2-11:2005)

This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60794-2-11:2005 E
Foreword
The text of document 86A/998/FDIS, future edition 1 of IEC 60794-2-11, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60794-2-11 on 2005-11-01.
This standard is to be used in conjunction with EN 60794-1-1:2002, EN 60794-1-2:2003,
EN 60794-2:2003 and EN 60794-2-10:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60794-2-11:2005 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60794-2-11:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60793-2-10 2002 Optical fibres EN 60793-2-10 2002
Part 2-10: Product specifications -
Sectional specification for category A1
multimode fibres
IEC 60793-2-50 2004 Part 2-50 : Product specifications - EN 60793-2-50 2004
Sectional specification for class B single- + corr. July 2004
mode fibres
IEC 60794-1-1 2001 Optical fibre cables EN 60794-1-1 2002
Part 1-1: Generic specification – General

IEC 60794-1-2 2003 Part 1-2: Generic specification - Basic EN 60794-1-2 2003
optical cable test procedures
IEC 60794-2 2002 Part 2: Indoor cables - Sectional EN 60794-2 2003
specification
IEC 60794-2-10 2003 Part 2-10: Indoor cables - Family EN 60794-2-10 2003
specification for simplex and duplex
cables
1)
EN 60793-2-10:2002 is superseded by EN 60793-2-10:2004, which is based on IEC 60793-2-10:2004.

NORME CEI
INTERNATIONALE
IEC
60794-2-11
INTERNATIONAL
Première édition
STANDARD
First edition
2005-06
Câbles à fibres optiques –
Partie 2-11:
Câbles intérieurs –
Spécification particulière pour les câbles
simplex et duplex utilisés dans le câblage
de locaux
Optical fibre cables –
Part 2-11:
Indoor cables –
Detailed specification for simplex and duplex
cables for use in premises cabling
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
H
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60794-2-11  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 General requirements .9
4 Particular requirements .11
4.1 Environmental requirements .11
4.1.1 Temperature cycling .11
4.2 Transmission requirements .11
4.2.1 Attenuation of cabled fibre.11
4.2.2 Fibre bandwidth requirements.13

Bibliography.15

Table 1 – Multimode maximum cable attenuation coefficient (dB/km) .11
Table 2 – Single-mode maximum cable attenuation coefficient (dB/km) .13
Table 3 – Minimum multimode fibre bandwidth (MHz⋅km).13

60794-2-11  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 2-11: Indoor cables –
Detailed specification for simplex and duplex cables
for use in premises cabling
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.