EN 62025-1:2002
(Main)High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
Establishes requirements to describe terms, to give recommendations for standard values and dimensions and to give guidance on fixed, surface mounted inductors.
Induktive Hochfrequenzbauelemente - Nicht elektrische Eigenschaften und Messmethoden - Teil 1: Oberflächenmontierbare Festinduktivitäten für den Einsatz in Elektronik und Telekommunikationsgeräten
Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes de mesure - Partie 1: Inductances fixes pour montage en surface utilisées dans les matériels électroniques et les équipements de télécommunications
Etablit les prescriptions applicables aux inductances fixes pour montage en surface en décrivant les termes nécessaires, en donnant des recommandations pour les valeurs et les dimensions normalisées et en proposant des lignes directrices.
High frequency inductive components - Non- electrical characteristics and measuring methods - Part 1: Fixed, surface mount inductors for use in electronic and telecommunication equipment (IEC 62025-1:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62025-1:2004
STANDARD
julij 2004
High frequency inductive components - Non- electrical characteristics and
measuring methods - Part 1: Fixed, surface mount inductors for use in electronic
and telecommunication equipment (IEC 62025-1:2002)
ICS 29.100.10 Referenčna številka
SIST EN 62025-1:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62025-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 29.100.10
English version
High frequency inductive components -
Non-electrical characteristics and measuring methods
Part 1: Fixed, surface mounted inductors for use in electronic and
telecommunication equipment
(IEC 62025-1:2002)
Composants inductifs à haute fréquence - Induktive Hochfrequenzbauelemente -
Caractéristiques non électriques et Nicht elektrische Eigenschaften und
méthodes de mesure Messmethoden
Partie 1: Inductances fixes pour montage Teil 1: Oberflächenmontierbare
en surface utilisées dans les matériels Festinduktivitäten für den Einsatz
électroniques et les équipements in Elektronik und
de télécommunications Telekommunikationsgeräten
(CEI 62025-1:2002) (IEC 62025-1:2002)
This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Com
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.