29.100 - Components for electrical equipment
Components for electrical equipment
Bauteile fur elektrische Gerate
Composants pour materiel electrique
Komponente za električne naprave
General Information
- Standard9 pagesEnglish and French language
sale 15% off
IEC TR 63307:2020(E) provides guidelines on the methods for measuring the frequency characteristics of permeability and permittivity in the frequency range of 1 MHz to 6 GHz for a noise suppression sheet for each electromagnetic noise countermeasure.
- Technical report74 pagesEnglish language
sale 15% off
IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores. The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that t...view more
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores.
The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that ...view more
- Standard21 pagesEnglish and French language
sale 15% off
This part of IEC 63093 specifies the shapes and dimensions of ferrite cores for inductive
components (transformers and chokes), whose the coil is typically made of multi-layer boards
(or the coil is part of the motherboard), and the effective parameter values used in
calculations. This document gives guidelines on allowable limits of surface irregularities
applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between
ferrite ...view more
- Standard34 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of IEC 60401 provides a nomenclature of the most frequent surface, bulk and shape
irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are
graphically exemplified as visual aids. A general recommendation is also given in Annex A for
a consistent scheme for specifying the exact location of the irregularity, combining a general
name for the location with more detailed qualifiers of the specified location. This document
can also be useful as a...view more
- Standard30 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of IEC 63093 specifies the dimensions and allowable limits of surface irregularities
of ferrite cores.
It is intended that this document includes ferrite cores which are widely used and referenced
in industry, either because they are included in national standards, or because they are seen
to have broad-based use in industry. Where applicable, it is intended that the existing
industrial name for each standard part appears with the part within this series.
It is intended that this...view more
- Standard17 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a test method for the mechanical strength of cores made of magnetic
oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ringcores
but other core types such as U-cores could be tested according to a derived method
agreed by the parties concerned. This document is also applicable to the mechanical strength
measurement of magnetic powder cores.
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of IEC 63182 specifies the dimensions of magnetic powder cores.
It is intended that this document will include magnetic powder cores which are widely used and
referenced in industry, either because they are included in national standards, or because they
are seen to have broad-based use in industry. Where applicable, it is intended that the existing
industrial name for each powder core will appear with the part within the IEC 63182 series.
This document also gives guidelines on th...view more
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applica...view more
- Standard186 pagesEnglish and French language
sale 15% off
- Standard2 pagesEnglish and French language
sale 15% off
IEC 63182-1:2020 specifies the dimensions of magnetic powder cores. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities.
It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national stand...view more
- Standard26 pagesEnglish and French language
sale 15% off- Standard13 pagesEnglish language
sale 15% off
IEC 61631:2020 is available as IEC 61631:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61631:2020 specifies a test method for the mechanical strength of cores made of magnetic oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ring-cores but other core types such as U-cores could be tested according to a derived method agreed by the parties concern...view more
- Standard32 pagesEnglish and French language
sale 15% off- Standard16 pagesEnglish language
sale 15% off
IEC 63093-9:2020 specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes), whose the coil is typically made of multi-layer boards (or the coil is part of the motherboard), and the effective parameter values used in calculations. This document gives guidelines on allowable limits of surface irregularities applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between ferrite core suppli...view more
- Standard61 pagesEnglish and French language
sale 15% off
IEC 63093-1:2020 specifies the dimensions and allowable limits of surface irregularities of ferrite cores.
It is intended that this document excludes ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded.
IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of...view more
- Standard28 pagesEnglish and French language
sale 15% off
IEC 60401-1:2020 is available as IEC 60401-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60401-1:2020 provides a nomenclature of the most frequent surface, bulk and shape irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are graphically exemplified as visual aids. A general recommendation is also given in Annex A for a consistent scheme...view more
- Standard58 pagesEnglish and French language
sale 15% off- Standard28 pagesEnglish language
sale 15% off
IEC 62024-2:2020 is available as IEC 62024-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62024-2:2020 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current ratings given in various manufacturers’ data books. This document is applicable to...view more
- Standard36 pagesEnglish and French language
sale 15% off
IEC 63093-3:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of half pot-cores made of ferrite, intended to be used in inductive proximity switches. Half pot-cores for inductive proximity switches are also called PS-cores.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes and shapes which are industrial standards, either by inclusion in a national standard, or by broad-based us...view more
- Standard28 pagesEnglish and French language
sale 15% off
IEC 63093-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as the effective parameter values to be used in calculations involving them. It also gives guidelines on the allowable limits of surface irregularities applicable to pot-cores in accordance with the relevant generic specification.
The selection of core sizes and shapes for ...view more
- Standard42 pagesEnglish and French language
sale 15% off
IEC 62003:2020 establishes requirements for electromagnetic compatibility testing of instrumentation, control, and electrical equipment supplied for use in systems important to safety at nuclear power plants and other nuclear facilities. The document lists the applicable IEC standards (principally the IEC 61000 series) which define the general test methods, and provides the necessary application-specific parameters and criteria to ensure that nuclear safety requirements are met.
This second edi...view more
- Standard80 pagesEnglish and French language
sale 15% off