Alarm systems - Combined and integrated alarm systems - General requirements

Standstill maintained * Superseded by CLC/TS 50398:2009

Alarmanlagen - Kombinierte und integrierte Alarmanlagen - Allgemeine Anforderungen

Systèmes d'alarme - Systèmes d'alarme combinés et intégrés - Règles générales

Alarm systems - Combined and integrated alarm systems - General requirements

General Information

Status
Withdrawn
Publication Date
18-Dec-2002
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Feb-2009
Completion Date
26-Feb-2009

Relations

Buy Standard

Technical specification
TS CLC/TS 50398:2003
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2003
Alarm systems - Combined and integrated alarm systems - General requirements
Alarm systems - Combined and integrated alarm systems - General requirements
Alarmanlagen - Kombinierte und integrierte Alarmanlagen - Allgemeine Anforderungen
Systèmes d'alarme - Systèmes d'alarme combinés et intégrés - Règels générales
Ta slovenski standard je istoveten z: CLC/TS 50398:2002
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION CLC/TS 50398
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION December 2002

ICS 13.320
English version
Alarm systems -
Combined and integrated alarm systems -
General requirements
This Technical Specification was approved by CENELEC on 2002-06-22.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and
to make the TS available promptly at national level in an appropriate form. It is permissible to keep
conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. CLC/TS 50398:2002 E
Foreword
This Technical Specification was prepared by the Technical Committee CENELEC TC 79, Alarm
systems. The text of the draft was submitted to the questionnaire and vote procedure and was approved
as CLC/TS 50398 on 2002-06-22.
The following date was fixed:
- latest date by which the existence of the CLC/TS
has to be announced at national level (doa) 2003-01-01
__________
– 3 - CLC/TS 50398:2002
Contents
Introduction.4
1 Scope.4
2 Normative references.4
3 Definitions.4
4 General description and fundamental principles.7
4.1 General.7
4.2 Standards.8
4.3 Configuration types of integrated alarm systems .8
4.3.1 Type 1.8
4.3.2 Type 2.10
5 System requirements and compatibility assessment .12
5.1 Standards.12
5.2 General design.12
5.2.1 General.12
5.2.2 Access levels.12
5.2.3 Special design requirements for configuration types .13
5.3 Common facility for control .13
5.4 Common facility for indication .13
5.4.1 Reliability requirement.13
5.4.2 Indication of the information .13
5.4.3 Priorities.13
5.5 Processing in alarm standard required processing elements .14
5.5.1 General.14
5.5.2 Software for common processing elements.14
5.6 Connection to alarm transmission system .15
5.7 Interconnection rules.15
5.8 Power supplies.15
5.9 Timing requirements.15
5.10 Simultaneous occurrence of events .15
5.11 Verification of performance .16
5.12 Central control facilities .16
5.12.1 General.16
5.12.2 Classification.16
5.12.3 Requirements.16
Annex A (informative) Application and installation guidelines and responsibilities.18
A.1 Specification.18
A.2 Contractual responsibility.18
A.3 Installation and wiring:.18
A.4 Certification.18
A.5 User Responsibilities.18
A.5.1 System supervision.18
A.5.2 System log book.18
A.6 Maintenance and Support .19
A.6.1 System upgrade and modification.19
A.6.2 System tests.19
A.6.3 System maintenance.19
A.7 Documentation and training .19

Introduction
This Technical Specification describes the general requirements and configuration types for combined
and integrated alarm systems which shall apply when one or more of the applications being integrated is
an alarm application.
The prime considerations of this Technical Specification are to ensure that the individual standards are
applied when they form a part of an integrated system solution with each other or with other (specified or
unspecified) applications.
This document provides additional information relating to initial system design, planning, installation,
commissioning, operation and maintenance for such combined and integrated alarm systems.
1 Scope
This Technical Specification specifies the requirements for alarm systems combined and integrated with
other systems which may or may not be alarm systems.
This Technical Specification defines requirements, related to the rules of integration, in order to
complement the individual alarm application standards and to provide clarification where there is conflict.
Alarm transmission systems are excluded from the scope of this Technical Specification.
2 Normative references
EN 54 Series, Fire alarm systems
EN 5013x series, Alarm systems
EN 60073:2002, Basic and safety principles for man-machine interface, marking and identification -
Coding principles for indicators and actuators
3 Definitions
For the purposes of this Technical Specification, the following definitions apply:
3.1
additional facility
facility which is not described in an application standard and not necessary to fulfil the functions required
of that application standard
NOTE 1  An additional facility may be shared by two or more applications. In this case this facility may be an additional facility for
one application but standard-required for another application.
NOTE 2  For an application where no standard exists, any facility of this application is considered as additional.
3.2
alarm
a warning of the presence of a hazard to life, property or the environment

– 5 - CLC/TS 50398:2002
3.3
alarm application
an application intended for the protection of life, property or the environment, such as:
– intrusion and hold-up alarm;
– social alarm;
– closed circuit television used for security and surveillance;
– access control;
– fire detection and fire alarm.
NOTE  This list is to be extended, following the scope of CLC/TC 79 and CEN/TC 72.
3.4
alarm receiving centre
a continuously manned centre to which information concerning the status of one or more alarm systems
is reported
3.5
alarm company
an organization which provides services for alarm systems
3.6
alarm condition
a condition of an alarm system, or part thereof, which results from the response of the system to the
presence of a hazard
3.7
alarm system
an electrical installation which responds to the manual or automatic detection of the presence of a hazard
3.8
alarm transmission equipment
equipment which is used primarily for the transmission of alarms from the alarm system interface at the
supervised premises to the annunciation equipment interface at the alarm receiving centre. It may also
transmit information or commands from the alarm receiving centre to one or more alarm systems
NOTE  This does not include equipment provided by a PTT or other general telecommunications equipment (for example modems)
where these are used primarily for alarm transmission.
3.9
alarm transmission system
equipment and network used to transfer information concerned with the state of one or more alarm
systems to one or more alarm receiving centres
3.10
application
all related facilities used for a specific purpose, such as the detection and warning in the event of fire,
lighting control etc.
3.11
application standard
standard related to a specific application (such as referred in A.8)
3.12
central control facility – CCF
equipment used for control and/or indicating purposes in type 1 configuration, which is connected to one
or more dedicated systems and which is normally manned by operating personnel, for example a
computer at a supervised location. The CCF is an additional facility (and not the standard-required control
and indicating equipment) for at least one of the applications

3.13
combined and integrated alarm system
in this document, the wording 'combined and integrated alarm system' is synonymous with 'integrated
alarm system', which will mostly be used in the document
3.14
common device
a device which is shared by two or more applications
3.15
common facility
facility which is shared by two or more applications
NOTE  A common facility may be additional for two or more applications, it may be standard-required for two or more applications
or it may be additional for one or more applications and standard-required for other applications.
3.16
common transmission path
a transmission path used by several applications
3.17
dedicated device
a device used solely by one application
3.18
dedicated system
a system used for only one application type and fulfilling all the requirements applicable to that application
3.19
dedicated transmission path
a transmission path used solely within one application
3.20
facility
hardware or software which enable a system to fulfil one or more functions, for example a transmission
path, a processing element, displays
3.21
fault condition
a condition of a system which prevents a system or part thereof from functioning normally
3.22
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.