Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

Alarmanlagen - Alarmübertragungsanlagen und -einrichtungen - Teil 2: Anforderungen an Übertragungseinrichtungen (ÜE)

Systèmes d'alarme - Systèmes et équipements de transmission d'alarme - Partie 2: Exigences pour les transmetteurs des locaux surveillés (SPT)

Alarmni sistemi - Sistemi in oprema za prenos alarma - 2. del: Zahteve za oddajno-sprejemne naprave v nadzorovanih prostorih (SPT) - Dopolnilo A1

General Information

Status
Published
Publication Date
16-Mar-2023
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
17-Mar-2023
Due Date
15-Feb-2023
Completion Date
17-Mar-2023

Relations

Buy Standard

Amendment
EN 50136-2:2013/A1:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50136-2:2013/A1:2023
01-maj-2023
Alarmni sistemi - Sistemi in oprema za prenos alarma - 2. del: Zahteve za oddajno-
sprejemne naprave v nadzorovanih prostorih (SPT) - Dopolnilo A1
Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for
Supervised Premises Transceiver (SPT)
Alarmanlagen - Alarmübertragungsanlagen und -einrichtungen - Teil 2: Anforderungen
an Übertragungseinrichtungen (ÜE)
Systèmes d'alarme - Systèmes et équipements de transmission d'alarme - Partie 2:
Exigences pour les transmetteurs des locaux surveillés (SPT)
Ta slovenski standard je istoveten z: EN 50136-2:2013/A1:2023
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
SIST EN 50136-2:2013/A1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50136-2:2013/A1:2023

---------------------- Page: 2 ----------------------
SIST EN 50136-2:2013/A1:2023


EUROPEAN STANDARD EN 50136-2:2013/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM March 2023
ICS 13.320; 33.040.40
English Version
Alarm systems - Alarm transmission systems and equipment -
Part 2: Requirements for Supervised Premises Transceiver
(SPT)
Systèmes d'alarme - Systèmes et équipements de Alarmanlagen - Alarmübertragungsanlagen und -
transmission d'alarme - Partie 2: Exigences pour les einrichtungen - Teil 2: Anforderungen an
transmetteurs des locaux surveillés (SPT) Übertragungseinrichtungen (ÜE)
This amendment A1 modifies the European Standard EN 50136-2:2013; it was approved by CENELEC on 2023-02-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50136-2:2013/A1:2023 E

---------------------- Page: 3 ----------------------
SIST EN 50136-2:2013/A1:2023
EN 50136-2:2013/A1:2023 (E)
Contents Page
European foreword . 3
1 Modification to subclause 4.2, “SPT classification” . 4
2 Modification to subclause 5.6, “ATS and ATP fault reporting to the AS” . 4
3 Modification to subclause 5.7, “Interface to the AS” . 4
4 Modification to subclause 5.8, “Monitoring of the transmission network interface(s) – Fault
reporting” . 4
5 Modification to subclause 5.10, “Event logging” . 4
6 Modification to subclause 6.1, “Modes of acknowledgement operation” . 5
7 Modification to subclause 7.1, “SPT documentation” . 5
8 Modification to subclause 9.1, “General” . 5
9 Modification to subclause 9.4.1, “General” . 6
10 Modification to subclause 9.4.2.1, “Object of the test”. 7
11 Modification to Table 6, “Test of upload and download of software and firmware” . 7
12 Modification to subclause 9.4.5.2, “Principle” .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.