EN 61169-19:2011

Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB

IEC 61169-19:2011 is a sectional specification. It provides information and rules for preparation of detail specification of SSMB series R.F connectors together with the pro forma blank detail specification The SSMB series connectors with characteristic impedance 50 ohm are one kind of low power miniature connectors with snap-on coupling mechanism and have the characteristics of light weight, small size, convenient connection and excellent characteristics. This connector range is suitable for the standard ranges of flexible and semi-rigid cables and is also available as a PCB mounted version. The connectors are usable up to a frequency of 3 GHz. It also prescribes mating face dimensions for grade 2 general purpose connectors, dimensional detail of grade 0 standard test connectors, gauging information and tests selected from IEC 61169-1 applicable to all detail specifications relating to SSMB series RF connectors. It indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. This first edition cancels and replaces IEC/PAS 61169-19, published in 2009, of which it constitutes a minor revision. The only change is that the PAS has been changed into and International Standard. French version of this publication was not submitted to the vote.

Hochfrequenz-Steckverbinder - Teil 19: Rahmenspezifikation - Hochfrequenz-Koaxial-Steckverbinder des Typs SSMB

Connecteurs pour fréquences radioélectriques – Partie 19: Spécification intermédiaire – Connecteurs coaxiaux pour fréquences radioélectriques de type SSMB

La CEI 61169-19:2011 est une spécification intermédiaire. Elle fournit des informations et des règles en vue de l'établissement de spécifications particulières de connecteurs RF série SSMB, ainsi que la spécification particulière cadre pro-forma. Les connecteurs série SSMB d'impédance caractéristique de 50 ohm représentent un type de connecteurs miniatures de faible puissance avec mécanisme de couplage par encliquetage, et ils comportent des caractéristiques de légèreté, de petites dimensions, de connexion commode, ainsi que d'excellentes caractéristiques. Cette gamme de connecteurs convient aux gammes normalisées de câbles souples et semi-rigides et elle est également disponible en version de montage sur circuit imprimé. Les connecteurs sont utilisables jusqu'à une fréquence de 3 GHz. Elle prescrit également les dimensions des faces d'accouplement pour des connecteurs de classe 2 à usage général, les détails dimensionnels des connecteurs d'essai normalisés de classe 0, les informations concernant les calibres, et les essais choisis dans la CEI 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs RF série SSMB. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d'une spécification particulière, et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H. Cette première édition annule et remplace la CEI/PAS 61169-19, publiée en 2009, dont elle constitue une révision mineure. Le seul changement est que le PAS a été changé en Norme internationale. La version française de cette norme n'a pas été soumise au vote.

Radiofrekvenčni konektorji - 19. del: Področna specifikacija - Radiofrekvenčni koaksialni konektorji vrste SSMB (IEC 61169-19:2011)

Konektorji serije SSMB z značilno impedanco 50 Ω so vrsta nizkoenergetskih miniaturnih konektorjev z natičnim spojnim mehanizmom in so lahki, majhni, primerni za povezovanje in imajo odlične lastnosti. Ta razpon konektorjev je primeren za uporabo pri standardnem razponu gibkih in poltogih kablov in je na voljo tudi kot različica, nameščena na ploščo tiskanega vezja. Konektorji so uporabni do frekvence 3 GHz. Ta področna specifikacija podaja informacije in pravila za pripravo podrobne specifikacije radiofrekvenčnih konektorjev serije SSMB skupaj s prazno predlogo za podrobno specifikacijo.
Predpisuje tudi dimenzije za združevanje za visokozmogljivostne konektorje stopnje 2, podrobnosti dimenzij standardnih preskusnih konektorjev stopnje 0, informacije in preskuse za umerjanje, izbrane iz IEC 61169-1, ki veljajo za vse podrobne specifikacije, povezane z radiofrekvenčnimi konektorji serije SSMB.
Ta specifikacija navaja priporočene značilnosti delovanja, ki jih je treba upoštevati pri pisanju podrobne specifikacije, in zajema razpored preskusov in zahteve za nadzor za ocenjevalne ravni M in H.

General Information

• Status: Published
• Publication Date: 03-Mar-2011
• Withdrawal Date: 02-Mar-2014
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Parallel Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Mar-2011
• Completion Date: 04-Mar-2011
• Ref Project: SIST EN 61169-19:2011 - Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB (IEC 61169-19:2011)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2011
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD5DGLRIUHNYHQþQL
NRDNVLDOQLNRQHNWRUMLYUVWH660%,(&
Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial
connectors of type SSMB (IEC 61169-19:2011)
Hochfrequenz-Steckverbinder - Teil 19: Rahmenspezifikation - Hochfrequenz-Koaxial-
Steckverbinder des Typs SSMB (IEC 61169-19:2011)
Connecteurs pour fréquences radioélectriques - Partie 19: Spécification intermédiaire -
Connecteurs coaxiaux pour fréquences radioélectriques de type SSMB (CEI 61169-
19:2011)
Ta slovenski standard je istoveten z: EN 61169-19:2011
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61169-19
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 33.120.30
English version
Radio-frequency connectors -
Part 19: Sectional specification -
Radio frequency coaxial connectors of type SSMB
(IEC 61169-19:2011)
Connecteurs pour fréquences Hochfrequenz-Steckverbinder -
radioélectriques - Teil 19: Rahmenspezifikation -
Partie 19: Spécification intermédiaire - Hochfrequenz-Koaxial-Steckverbinder des
Connecteurs coaxiaux pour fréquences Typs SSMB
radioélectriques de type SSMB (IEC 61169-19:2011)
(CEI 61169-19:2011)
This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61169-19:2011 E
Foreword
The text of document 46F/138/CDV, future edition 1 of IEC 61169-19, prepared by SC 46F, R.F. and
microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61169-19 on 2011-03-03.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-03
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-03
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61169-19:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61169-19:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61169-1 1992 Radio-frequency connectors - EN 61169-1 1994
A1 1996 Part 1: Generic specification - General A1 1996
A2 1997 requirements and measuring methods A2 1997

IEC 61169-19 ®
Edition 1.0 2011-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio-frequency connectors –
Part 19: Sectional specification – Radio frequency coaxial connectors of type
SSMB
Connecteurs pour fréquences radioélectriques –
Partie 19: Spécification intermédiaire – Connecteurs coaxiaux pour fréquences
radioélectriques de type SSMB
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 33.120.30 ISBN 978-2-88912-320-9
– 2 – 61169-19  IEC:2011
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Mating face and gauge information . 6
3.1 Dimensions – General purpose connectors – Grade 2 . 6
3.1.1 Connector with socket-centre contact . 6
3.1.2 Connector with pin-centre contact . 8
3.2 Gauges . 9
3.2.1 Gauge pins for socket-centre contact . 9
3.2.2 Test procedure . 9
3.2.3 Gauge for outer contact of socket-centre contact . 10
3.2.4 Test procedure . 10
3.3 Dimensions – Standard test connectors – Grade 0 . 11
3.3.1 Connector with socket-centre contact . 11
3.3.2 Connector with pin-centre contact . 12
4 Quality assessment procedure . 13
4.1 General . 13
4.2 Rating and characteristics (see Clause 6 of IEC 61169-1) . 13
4.3 Test schedule and inspection requirements – Acceptance tests . 15
4.3.1 Acceptance tests . 15
4.3.2 Periodic tests . 16
4.4 Procedures . 18
4.4.1 Quality conformance inspection . 18
4.4.2 Qualification approval and its maintenance . 18
5 Instructions for preparation of detail specifications . 18
5.1 General . 18
5.2 Identification of the component . 18
5.3 Performance . 19
5.4 Marking, ordering information and related matters . 19
5.5 Selection of tests, test conditions and severities . 19
5.6 Blank detail specification pro-forma for type SSMB connector . 20

Figure 1 – Connector with socket-centre contact (for dimensions and notes, see Table 1) . 7
Figure 2 – Connector with pin-centre contact (for dimensions and notes, see Table 2) . 8
Figure 3 – Gauge pins for socket-centre contact (for dimensions and notes, see Table 3) . 9
Figure 4 – Outer contact sizing and retention force gauges A and B (for dimensions
and notes, see Table 4) . 10
Figure 5 – Connector with socket-centre contact (for dimensions and notes, see Table 5) . 11
Figure 6 – Connector with pin-centre contact (for dimensions and notes, see Table 6) . 12

Table 1 – Dimensions of connector with socket-centre contact . 7
Table 2 – Dimensions of connector with pin-centre contact . 8
Table 3 – Dimensions of gauge pins for socket-centre contact . 9
Table 4 – Dimensions of gauge for outer contact . 10
Table 5 – Dimensions of connector with socket-centre contact . 11

61169-19  IEC:2011 – 3 –
Table 6 – Dimensions of connector with pin-centre contact . 12
Table 7 – Rating and characteristics . 13
Table 8 – Acceptance tests . 15
Table 9 – Periodic tests . 16

– 4 – 61169-19  IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 19: Sectional specification –
Radio frequency coaxial connectors of type SSMB

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be th
...