IEC 63138-2:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ4 series circular connectors with four RF channels, as well as a detailed specification of the blank format. An MQ4 series circular connector with 50 Ω nominal impedance has four RF channels which can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

IEC 63185:2020 relates to a measurement method for complex permittivity of a dielectric substrates at microwave and millimeter-wave frequencies. This method has been developed to evaluate the dielectric properties of low-loss materials used in microwave and millimeter-wave circuits and devices. It uses higher-order modes of a balanced-type circular disk resonator and provides broadband measurements of dielectric substrates by using one resonator, where the effect of excitation holes is taken int...view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

IEC 61169-15:2021 provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling with a characteristic impedance of 50 Ω (type SMA).
This document specifies mating face dimensions for high performance connectors – grade 1, dimensional details of standard test connectors – grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specificat...
view more

    • sale 15% off
    • Standard
      50 pages
      English and French language

IEC 61169-65:2021 provides information and rules for the preparation of detail specifications (DS) for series 1,35 mm RF coaxial connectors with screw coupling, characteristic impedance 50 Ω, for operating frequencies up to 90 GHz. Typical use in test and measurement applications.
It describes mating face dimensions for general purpose connectors – grade 1, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail ...
view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 63138-2:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ4 series circular connectors with four RF channels, as well as a detailed specification of the blank format. An MQ4 series circular connector with 50 Ω nominal impedance has four RF channels which can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. ...view more

    • sale 15% off
    • Standard
      54 pages
      English and French language

IEC 63185:2020 relates to a measurement method for complex permittivity of a dielectric substrates at microwave and millimeter-wave frequencies. This method has been developed to evaluate the dielectric properties of low-loss materials used in microwave and millimeter-wave circuits and devices. It uses higher-order modes of a balanced-type circular disk resonator and provides broadband measurements of dielectric substrates by using one resonator, where the effect of excitation holes is taken int...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC TS 61169-1-51:2020 relates to radio frequency connectors for RF transmission lines for use in telecommunications, electronics and similar equipment. It provides the technical report for the uncertainty specifications for return loss measurements, which apply to individual connector types, by vector network analysers (VNAs). It is intended to establish concepts and procedures considering:
– testing and measuring procedures concerning frequency domain electrical properties;
– uncertainty spe...
view more

    • sale 15% off
    • Technical specification
      13 pages
      English language

This part of IEC 61169 provides test methods for the voltage standing wave ratio, return loss
and reflection coefficient of RF connectors, including frequency domain method, time domain
method, and gating.
This document is applicable to cable RF connectors, microstrip RF connectors and RF
adapters. It is also suitable to RF channels in multi-RF channel connectors and hybrid
connectors.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for coaxial connectors with a 9,5 mm inner
diameter of the outer conductor and quick lock coupling mechanism, characteristic impedance
50 Ω and an operating frequency of up to 8,5 GHz. Series Q4.1-9.5 connectors with socket
centre contact are compatible with threaded 4,1-9,5 series (specified in IEC 60169-11)
connectors with pin centre contact. Th...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for RF coaxial connectors which can preferably
be used with RF cables 60096 IEC 50-3 of IEC 60096-2. These connector patterns are for low
power, quick connect/disconnect applications using a bayonet type coupling mechanism and
are commonly known as type "BNC" with characteristic impedance 75 Ω.
It describes the interface dimensions for general pur...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

IEC 61169-1-4:2020 provides test methods for the voltage standing wave ratio, return loss and reflection coefficient of RF connectors, including frequency domain method, time domain method, and gating.
This document is applicable to cable RF connectors, microstrip RF connectors and RF adapters. It is also suitable to RF channels in multi-RF channel connectors and hybrid connectors.

    • sale 15% off
    • Standard
      26 pages
      English and French language

IEC 61169-61:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for coaxial connectors with a 9,5 mm inner diameter of the outer conductor and quick lock coupling mechanism, characteristic impedance 50 Ω and an operating frequency of up to 8,5 GHz. Series Q4.1-9.5 connectors with socket centre contact are compatible with threaded 4,1-9,5 series (specified in IEC 60169-11) connectors with pin centre contact. This type of...view more

    • sale 15% off
    • Standard
      61 pages
      English and French language

IEC 61169-63:2020 which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors which can preferably be used with RF cables 60096 IEC 50-3 of IEC 60096-2. These connector patterns are for low power, quick connect/disconnect applications using a bayonet type coupling mechanism and are commonly known as type "BNC" with characteristic impedance 75 W.
It describes the interface dimensions for general purpose conne...
view more

    • sale 15% off
    • Standard
      58 pages
      English and French language

IEC 63137-1 defines general requirements for standard test radio frequency (RF) connectors (grade 0), including terms and definitions, ratings and characteristics, general requirements, test methods, quality assessment procedures, and etc. Standard test radio frequency (RF) connectors (grade 0) are intended to measure grade 1 and grade 2 RF connectors for electrical performances. Typically, a standard test radio frequency (RF) connector (grade 0) is an adapter with one end (normally a precision ...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

The document provides test methods for the insertion loss of radio-frequency (RF) connectors. This document is applicable to cable RF connectors, microstrip RF connectors and RF connector adapters. It is also applicable to RF channels in multi-RF channel connectors and hybrid connectors which contain any combination of coaxial contact, optical fibres contact, and current-carrying electrical contact element.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

EN-IEC 61169-64, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for IEC 61169 (all parts) coaxial connectors with 0,8 mm coupling. The connectors are used with cables with characteristic impedance 50 O in an operating frequency range up to 145 GHz. The connectors are widely used in communications and measurements. It describes the interface dimensions for general purpose connectors with gauging information and the mandato...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

EN-IEC 63138-1, which is a generic specification, specifies general requirements for multi-channel radio-frequency connectors, including terms and definitions, design and construction, ratings and characteristics, climatic categories, IEC type designation, requirements and test procedures, quality assessment, marking, etc. It provides the basis for establishing the sectional specifications for various multichannel radiofrequency connector types. This document applies to multi-channel radio-frequ...view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

IEC 62680-1-8:2019 is to describe in detail all the Terminal Types that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class Specification, although subsequent revisions of this document are independent of the revision evolution of the main Audio Device Class Specification. This is to easily accommodate the addition of new Terminal Types without impeding the core Audio Device Class Specification. The Audio Device Class Definition applies...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

IEC 61169-64:2019, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for IEC 61169 (all parts) coaxial connectors with 0,8 mm coupling. The connectors are used with cables with characteristic impedance 50 Ω in an operating frequency range up to 145 GHz. The connectors are widely used in communications and measurements. It describes the interface dimensions for general purpose connectors with gauging information and the manda...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

IEC 61169-1-2:2019 provides test methods for the insertion loss of radio-frequency (RF) connectors. This document is applicable to cable RF connectors, microstrip RF connectors and RF connector adapters. It is also applicable to RF channels in multi-RF channel connectors and hybrid connectors which contain any combination of coaxial contact, optical fibres contact, and current-carrying electrical contact element.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

IEC 63138-1:2019 which is a generic specification, specifies general requirements for multi-channel radio-frequency connectors, including terms and definitions, design and construction, ratings and characteristics, climatic categories, IEC type designation, requirements and test procedures, quality assessment, marking, etc. It provides the basis for establishing the sectional specifications for various multi­channel radio­frequency connector types. This document applies to multi-channel radio-fr...view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

IEC 63137-1:2019 defines general requirements for standard test radio frequency (RF) connectors (grade 0), including terms and definitions, ratings and characteristics, general requirements, test methods, quality assessment procedures, and etc. Standard test radio frequency (RF) connectors (grade 0) are intended to measure grade 1 and grade 2 RF connectors for electrical performances. Typically, a standard test radio frequency (RF) connector (grade 0) is an adapter with one end (normally a preci...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

EN-IEC 61169-24, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F). It describes the interface dimensions with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type F connectors. This specification indicates the recommended performance characteristics to be considered when wr...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

IEC 62680-1-8:2019 is to describe in detail all the Terminal Types that are supported by the Audio Device Class. This document is considered an integral part of the Audio Device Class Specification, although subsequent revisions of this document are independent of the revision evolution of the main Audio Device Class Specification. This is to easily accommodate the addition of new Terminal Types without impeding the core Audio Device Class Specification.
The Audio Device Class Definition applie...
view more

    • sale 15% off
    • Standard
      30 pages
      English and French language

IEC 61169-1-2:2019 provides test methods for the insertion loss of radio-frequency (RF) connectors.
This document is applicable to cable RF connectors, microstrip RF connectors and RF connector adapters. It is also applicable to RF channels in multi-RF channel connectors and hybrid connectors which contain any combination of coaxial contact, optical fibres contact, and current-carrying electrical contact element.

    • sale 15% off
    • Standard
      21 pages
      English and French language

IEC 61169-64:2019, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for IEC 61169 (all parts) coaxial connectors with 0,8 mm coupling.
The connectors are used with cables with characteristic impedance 50 Ω in an operating frequency range up to 145 GHz. The connectors are widely used in communications and measurements.
It describes the interface dimensions for general purpose connectors with gauging information and the man...
view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 63138-1:2019 which is a generic specification, specifies general requirements for multi-channel radio-frequency connectors, including terms and definitions, design and construction, ratings and characteristics, climatic categories, IEC type designation, requirements and test procedures, quality assessment, marking, etc.
It provides the basis for establishing the sectional specifications for various multi­channel radio­frequency connector types. This document applies to multi-channel radio-f...
view more

    • sale 15% off
    • Standard
      62 pages
      English and French language

IEC 63137-1:2019 defines general requirements for standard test radio frequency (RF) connectors (grade 0), including terms and definitions, ratings and characteristics, general requirements, test methods, quality assessment procedures, and etc.
Standard test radio frequency (RF) connectors (grade 0) are intended to measure grade 1 and grade 2 RF connectors for electrical performances. Typically, a standard test radio frequency (RF) connector (grade 0) is an adapter with one end (normally a prec...
view more

    • sale 15% off
    • Standard
      49 pages
      English and French language

IEC 62680-1-3:2018(E) defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices: - USB Type...view more

    • sale 10% off
    • Standard
      261 pages
      English language
    • e-Library read for
      1 day

IEC 62680-1-3:2018 defines the USB Type-C™ receptacles, plug and cables.
The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices:
- USB Type-...
view more

    • sale 15% off
    • Standard
      565 pages
      English and French language

IEC 62995:2018 specifies requirements for the installation of cabling on railway vehicles and within electrical enclosures on railway vehicles, including magnetic levitation trains and trolley buses. This document covers cabling for making electrical connections between items of electrical equipment, including cables, busbars, terminals and plug/socket devices. The material selection criteria given herein are applicable to cables with copper conductors.

    • sale 15% off
    • Standard
      141 pages
      English and French language

IEC 62680-1-1-3:2017(E) is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided to allow interoperability of components designed to this specification. Informative information, when provided, may illustrate possible design implementations.

    • sale 10% off
    • Standard
      303 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for type L32-4 and L32-5 threaded multi-pin
radio frequency connectors with anti mismating mechanism, 50 Ω nominal impedance. The
operating frequency of each channel is up to 4 GHz. These connectors have been widely used
in mobile communication system like TD-SCDMA and TD-LTE, and can also be used in some
similar equipment.
It also prescribes mat...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

IEC 61169-59:2017, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for type L32-4 and L32-5 threaded multi-pin radio frequency connectors with anti mismating mechanism, 50 Ω nominal  impedance. The operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE, and can also be used in some similar equipment. It also prescribes mating ...view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial
straight plugs − 50 ohms.
These connectors are foreseen for light weight coaxial cables; so, appropriate sealing have to be achieved.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

IEC 61071:2017 is also available as IEC 61071:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61071:2017 applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. The document distinguishes between AC and DC...
view more

    • sale 15% off
    • Standard
      94 pages
      English and French language

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for RF coaxial connectors with threaded
coupling, typically for use in 50 Ω cable networks (type 4,1-9,5).
This document prescribes mating face dimensions for general purpose connectors – grade 2,
dimensional details of standard test connectors-grade 0, gauging information and tests
selected from IEC 61169-1, applicable to all detail specification...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 61169-11:2017(E), which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with threaded coupling, typically for use in 50 Ohms cable networks (type 4,1-9,5). This document prescribes mating face dimensions for general purpose connectors – grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specificati...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 61169-59:2017, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for type L32-4 and L32-5 threaded multi-pin radio frequency connectors with anti mismating mechanism, 50 Ω nominal impedance. The operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE, and can also be used in some similar equipment.
It also prescribes mating face d...
view more

    • sale 15% off
    • Standard
      69 pages
      English and French language
    • sale 15% off
    • Standard
      32 pages
      English language

IEC 62895:2017 specifies test methods and requirements for transmission power cable systems, cables with extruded insulation and their accessories for fixed land installations, for rated voltages up to and including 320 kV.
Within the scope of this standard “extruded insulation” means insulation manufactured by extrusion of either thermoplastic (e.g. polyethylene) or crosslinked (e.g. crosslinked polyethylene, ethylene propylene rubber, etc.) material. The insulation material may be either unfi...
view more

    • sale 15% off
    • Standard
      136 pages
      English and French language

IEC 61169-11:2017, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with threaded coupling, typically for use in 50 Ω cable networks (type 4,1-9,5).
This document prescribes mating face dimensions for general purpose connectors - grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relatin...
view more

    • sale 15% off
    • Standard
      49 pages
      English and French language

IEC 60034-18-42:2017 defines criteria for assessing the insulation system of stator/rotor windings of single or polyphase AC machines which are subjected to repetitive impulse voltages, such as those generated by pulse width modulation (PWM) converters, and are expected to experience and withstand partial discharge activity during service. It specifies electrical qualification tests on representative specimens to verify fitness for operation with voltage-source converters. It also describes an a...view more

    • sale 15% off
    • Standard
      93 pages
      English and French language

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for coaxial connectors with 10 mm inner
diameter of outer conductor, characteristic impedance 50 Ω, series 4,3-10 with screw type,
hand screw type or quick-lock type coupling, for an upper operating frequency limit of 6 GHz,
for use in wireless telecommunication and wireless network applications in conjunction with
appropriate transmission line ty...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

IEC 61169-54:2016 is a sectional specification which provides information and rules for the preparation of detail specifications (DS) for coaxial connectors with 10 mm inner diameter of outer conductor, characteristic impedance 50 Ohms, series 4,3-10 with screw type, hand screw type or quick-lock type coupling, for an upper operating frequency limit of 6 GHz, for use in wireless telecommunication and wireless network applications in conjunction with appropriate transmission line types for these ...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for SBMA series coaxial connectors with blindmate
coupling.
The connectors are used with cables with characteristic impedance 50 Ω in an operating
frequency range up to 28 GHz. The connectors are widely used in communications, antennas,
radars and other applications for modules interconnections. It is also normally used in
conjunction with approp...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

IEC 61169-58:2016, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for SBMA series coaxial connectors with blind-mate coupling. The connectors are used with cables with characteristic impedance 50 Ω in an operating frequency range up to 28 GHz. The connectors are widely used in communications, antennas, radars and other applications for modules interconnections. It is also normally used in conjunction with appropriat...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day