prEN IEC 61753-086-02:2024
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 086-02: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category c - Indoor controlled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 086-02: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category c - Indoor controlled environment
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 086-2: Nicht mit Steckverbindern versehene bidirektionale 1 490/1 550-nm-downstream-1 310-nm-upstream-Einmoden-WWDM-Bauteile für die Kategorie C - Kontrollierte Innenraumumgebung
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 086-02: Dispositifs WWDM unimodaux non connectorisés bidirectionnels 1 490 nm/1 550 nm en voie descendante et 1 310 nm en voie montante pour la catégorie c - Environnement intérieur contrôlé
Optični spojni elementi in pasivne komponente - Tehnični standard - 086-02. del: Elementi WWDM brez konektorjev z enorodovnimi vlakni velikosti 1490/1550 nm za prenos navzdol (dolvodni) in 1310 nm za prenos navzgor (gorvodni), za kategorijo C - Notranje nadzorovano okolje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Optični spojni elementi in pasivne komponente - Tehnični standard - 086-02. del:
Elementi WWDM brez konektorjev z enorodnimi vlakni velikosti 1490/1550 nm za
prenos navzdol (dolvodni) in 1310 nm za prenos navzgor (gorvodni), za kategorijo
C - Notranje nadzorovano okolje
Fibre optic interconnecting devices and passive components - Performance standard -
Part 086-02: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream
1310 nm upstream WWDM devices for category c - Indoor controlled environment
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 086-02: Dispositifs WWDM unimodaux non connectorisés bidirectionnels 1 490
nm/1 550 nm en voie descendante et 1 310 nm en voie montante pour la catégorie c -
Environnement intérieur contrôlé
Ta slovenski standard je istoveten z: prEN IEC 61753-086-02:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86B/4918/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-086-02 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-06-14 2024-09-06
SUPERSEDES DOCUMENTS:
86B/4843/CD, 86B/4873A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Performance standard - Part 086-02: Non-
connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for
category C - Indoor controlled environment
PROPOSED STABILITY DATE: 2031
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.
86B/4918/CDV - 2 - IEC CDV 61753-086-02 ED1 ©IEC 2024
CONTENTS
FOREWORD . 2
1 Scope . 3
2 Normative references . 3
3 Terms and definitions . 4
4 Tests . 4
5 Test reports . 5
6 Performance requirements . 5
6.1 Reference components . 5
6.2 Dimensions . 5
6.3 Sample size . 5
6.4 Test details and requirements . 5
Annex A (normative) Sample size . 11
Annex B (informative) General information for 1 490 / 1 550 nm downstream and 1 310
nm upstream PON WWDM device . 12
Bibliography . 13
Table 1 – Single-mode spectral bands . 5
Table 2 – Test details and requirements for category C . 6
Table A.1 – Sample size of tests . 11
Figure B.1 – Example of 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM
at central office and customer side . 12
Figure B.2 – Example of 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM
at central office side . 12
IEC CDV 61753-086-02 ED1 ©IEC 2024 - 3 - 86B/4918/CDV
2 FOREWORD
3 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
4 all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
5 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
6 this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
7 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
8 participate in this preparatory work. International, governmental and non-governmental organizations liaising with
9 the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for
10 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
11 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
12 international consensus of opinion on the relevant subjects since each technical committee has representation
13 from all interested National Committees.
14 3) The documents produced have the form of recommendations for international use and are published in the form
15 of standards, technical specifications, technical reports or guides and they are accepted by the National
16 Committees in that sense.
17 4) In order to promote international unification, IEC National Committees undertake to apply IEC International
18 Standards transparently to the maximum extent possible in their national and regional standards. Any divergence
19 between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the
20 latter.
21 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
22 equipment declared to be in conformity with one of its standards.
23 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
24 of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
26 International Standard IEC 61753-086-02 has been prepared by subcommittee 86B: Fibre optic
27 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
28 This first edition cancels and replaces the first edition of IEC 61753-086-2 published in 2009
29 and constitutes a technical revision. The specific technical changes from the previous edition
30 are as follows:
32 a) Change of test conditions harmonizing with IEC 61753-1: 2018.
35 The text of this document is based on the following documents:
FDIS Report on voting
86B/XX/FDIS 86B/XX/RVD
37 Full information on the voting for the approval of this document can be found in the report on
38 voting indicated in the above table.
39 This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
40 The committee has decided that the contents of this publication will remain unchanged until
41 ______. At this date, the publication will be
42 • reconfirmed;
43 • withdrawn;
44 • replaced by a revised edition, or
45 • amended.
86B/4918/CDV - 4 - IEC CDV 61753-086-02 ED1 ©IEC 2024
48 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
49 PERFORMANCE STANDARD
51 Part 086-02: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm
52 downstream and 1 310 nm upstream WWDM devices for categorie C –
53 Indoor controlled environment
54 1 Scope
55 This part of IEC 61753 contains the minimum initial performance, test and measurement
56 requirements and severities which a fibre optic pigtailed 1 490 / 1 550 nm downstream and
57 1 310 nm upstream wide wavelength division multiplexing (WWDM) passive optical network
58 (PON) device must satisfy in order to be categorized as meeting the requirements of category
59 C (Indoor controlled environment), as defined in Annex A of IEC 61753-1: 2018. WWDM is
60 defined in IEC 62074-1. Annex B give general information for these PON WWDM devices.
61 2 Normative references
62 The following documents are referred to in the text in such a way that some or all of their content
63 constitutes requirements of this document. For dated references, only the edition cited applies.
64 For undated references, the latest edition of the referenced document (including any
65 amendments) applies.
66 IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
67 class B single-mode fibres
68 IEC 60794-2-50, Optical fibre cables Part 2-50: Indoor cables – Family specification for simplex
69 and duplex cables for use in terminated cable assemblies
70 IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic
71 test and measurement procedures
72 IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
73 measurement procedures – Part 1: General and guidance
74 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
75 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
76 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
77 measurement procedures – Part 2-4: Tests – Fibre or cable retention
78 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
79 measurement procedures – Part 2-5: Tests – Torsion
80 IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
81 measurement procedures – Part 2-9: Tests – Shock
82 IEC 61300-2-14, Fibre optic interconnecting devices and passive components – Basic test
83 and measurement procedures – Part 2-14: Tests – High optical power
84 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test
85 and measurement procedures – Part 2-17: Tests – Cold
86 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test
87 and measurement procedures – Part 2-18: Tests – Dry heat
88 IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and
89 measurement procedures – Part 2-19: Tests – Damp heat (steady state)
IEC CDV 61753-086-02 ED1 ©IEC 2024 - 5 - 86B/4918/CDV
90 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
91 measurement procedures – Part 2-22: Tests – Change of temperature
92 IEC 61300-2-42, Fibre optic interconnecting devices and passive components - Basic test and
93 measurement procedures - Part 2-42: Tests - Static side load for strain relief
94 IEC 61300-2-44, Fibre optic interconnecting devices and passive components - Basic test and
95 measurement procedures - Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
97 IEC 61300-3-2, Fibre optic interconnecting devices and passive components - Basic test and
98 measurement procedures - Part 3-2: Examination and measurements - Polarization dependent
99 loss in a single-mode fibre optic device
100 IEC 61300-3-6, Fibre optic interconnecting devices and passive components - Basic test and
101 measurement procedures - Part 3-6: Examination and measurements – Return loss
103 IEC 61300-3-7, Fibre optic interconnecting devices and passive components - Basic test and
104 measurement procedures - Part 3-7: Examination and measurements – Wavelength
105 dependence of attenuation and return loss of single mode components
106 IEC 61300-3-20, Fibre optic interconnecting devices and passive components – Basic test
107 and measurement procedures – Part 3-20: Examinations and measurements – Directivity of
108 fibre optic branching devices
110 IEC 61300-3-29, Fibre optic interconnecting devices and passive components – Basic test
111 and measurement procedures – Part 3-29: Examinations and measurements – Spectral
112 transfer characteristics of DWDM devices
114 IEC 61753-1, Fibre optic interconnecting devices an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.