EN 61753-031-6:2014
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment
IEC 61753-031-6:2008(E) provides the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device (NWBD) should satisfy in order to be categorized as meeting the requirements of Category 0 (uncontrolled environment) as defined in Annex A of IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 031-6: Nicht steckbare wellenlängenunabhängige Einmoden-1×N- und -2×N-Verzweiger für die Kategorie O - Unkontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 031-6 : Dispositifs de couplage indépendants de la longueur d’onde 1×N et 2×N en unimodal non-connectorisés pour la catégorie O - Environnement non contrôlé
IEC 61753-031-6:2014 contient les exigences et les sévérités initiales minimales d’essais et de mesures auxquelles il convient qu’un dispositif de couplage indépendant de la longueur d’onde (NWBD, non-wavelength selective branching device) satisfasse afin d’être classé comme satisfaisant aux exigences de la présente norme. Ces exigences couvrent les dispositifs de couplage indépendants de la longueur d’onde 1xN et 2xN en unimodal, non connectorisés, bidirectionnels symétriques destinés à être utilisés dans un environnement de catégorie O selon l’IEC (N correspond au nombre de ports de couplage), qui sont utilisés, en particulier, mais pas de manière exclusive, pour les applications PON. Dans le cas des NWBD symétriques, deux classes d’affaiblissement et d’uniformité sont prises en compte: la classe A (classe de première qualité) qui satisfait aux exigences les plus restrictives (à savoir pour les applications PON étendues) et la classe B (classe normale) pour les applications normales (à savoir les applications PON d’étendue normale). Ces exigences couvrent aussi les dispositifs de couplage indépendants de la longueur d’onde en unimodal, non connectorisés, bidirectionnels asymétriques, toutefois les spécifications des dispositifs de couplage asymétriques sont limitées aux dispositifs 1x2 et 2x2, car ce sont les plus couramment utilisés. Cette deuxième édition de l’IEC 61753-031-6 annule et remplace la première édition parue en 2008 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - la suppression de l’Introduction; - un domaine d’application mis à jour et étendu pour refléter l’introduction de deux classes de performance d’affaiblissement et d’uniformité pour les NWBD symétriques à la place des technologies de dispositifs de couplage du marché; - une liste mise à jour des références normatives; - une introduction plus simple des deux types de bandes spectrales; - l’Article 5, Exigences de performances, a été mis à jour et étendu pour refléter l’introduction de deux classes de performance d’affaiblissement et d’uniformité pour les NWBD symétriques; - des éléments soumis à essai simplifiés pour exclure les essais de chaleur humide (essai continu) et d’impact pour les exigences de performance; - l’Annexe A a été modifiée pour introduire les exigences calculées et minimales en matière d’affaiblissement et d’uniformité. Mots clés: couplage indépendant de la longueur d’onde (NWBD), environnement de catégorie O selon l’IEC
Tehnični standard za optične spojne elemente in pasivne komponente - 031-6. del: Enorodni 1xN in 2xN ne-valovnodolžinsko selektivni optični sklopniki brez konektorjev za kategorijo O - Nenadzorovano okolje (IEC 61753-031-6:2014)
Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati valovnodolžinsko neodvisni selektivni razvejilni element (NWBD), da ustreza zahtevam tega standarda.
Zahteve zajemajo uravnotežene dvosmerne enorodne valovnodolžinsko neodvisne selektivne razvejilne elemente 1×N in 2×N brez konektorjev za uporabo v okolju kategorije IEC O (N je število razvejilnih vrat), ki se še posebej uporabljajo za PON, vendar ne izključno. Za uravnotežene NWBD sta obravnavana dva kakovostna razreda slabljenja in enotnosti: razred A (premium razred), ki izpolnjuje strožje zahteve (tj. PON z razširjenim dosegom), in razred B (standardni razred) za standardno uporabo (tj. PON z običajnim dosegom).
Zahteve zajemajo tudi neuravnotežene dvosmerne enorodne valovnodolžinsko neodvisne
selektivne razvejilne elemente; vendar so specifikacije neuravnoteženih razvejilnih elementov omejene na naprave1 × 2 in 2 × 2, ker se uporabljajo najpogosteje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2014
7HKQLþQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
(QRURGQL[1LQ[1QHYDORYQRGROåLQVNRVHOHNWLYQLRSWLþQLVNORSQLNLEUH]
NRQHNWRUMHY]DNDWHJRULMR21HQDG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components performance standard --
Part 031-6: Non-connectorised single mode 1xN and 2xN non-wavelength-selective
branching devices (NWBD) for Category O - Uncontrolled environment
Lichtwellenleiter-Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
031-6: Nicht steckbare wellenlängenunabhängige Einmoden-1xN- und 2xN-Verzweiger
für die Kategorie O - Freiluftanlagen
Ta slovenski standard je istoveten z: EN 61753-031-6:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61753-031-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 031-6: Non-connectorized single-
mode 1xN and 2xN non-wavelengthselective branching devices
for Category O - Uncontrolled environment
(IEC 61753-031-6:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Bauteile - Betriebsverhalten -
Partie 031-6 : Dispositifs de couplage indépendants de la Teil 031-6: Nicht steckbare wellenlängenunabhängige
longueur d'onde 1×N et 2×N en unimodal non- Einmoden-1×N- und -2×N-Verzweiger für die Kategorie O -
connectorisés pour la catégorie O - Environnement non Unkontrollierte Umgebung
contrôlé (IEC 61753-031-6:2014)
(CEI 61753-031-6:2014)
This European Standard was approved by CENELEC on 2014-10-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-031-6:2014 E
Foreword
The text of document 86B/3763/FDIS, future edition 2 of IEC 61753-031-6, prepared by SC 86B “Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-031-6:2014.
The following dates are fixed:
(dop) 2015-07-08
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-10-08
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-031-6:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60875-1 NOTE Harmonized as EN 60875-1.
IEC 61753-1 NOTE Harmonized as EN 61753-1.
- 3 - EN 61753-031-6:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60793-2-50 2012 Optical fibres - EN 60793-2-50 2013
Part 2-50: Product specifications -
Sectional specification for class B single-
mode fibres
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady
state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
Publication Year Title EN/HD Year
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for strain
relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief
of fibre optic devices
IEC 61300-2-48 2009 Fibre optic interconnecting devices and EN 61300-2-48 2009
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling
IEC 61300-3-2 2009 Fibre optic interconnecting devices and EN 61300-3-2 2009
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements
- Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-3 2009 Fibre optic interconnecting devices and EN 61300-3-3 2009
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements
- Active monitoring of changes in
attenuation and return loss
IEC 61300-3-6 2008 Fibre optic interconnecting devices and EN 61300-3-6 2009
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements
- Return loss
IEC 61300-3-7 2009 Fibre optic interconnecting devices and EN 61300-3-7 2012
(mod) passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements
- Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and
measurements - Directivity of fibre optic
branching devices
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and
measurements - Transient loss
IEC 61753-031-6 ®
Edition 2.0 2014-09
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-
selective branching devices for Category O – Uncontrolled environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.10 ISBN 978-2-8322-1841-9
– 2 – IEC 61753-031-6:2014 © IEC 2014
CONTENTS
FOREWORD . 3
NOTICE . 5
1 Scope . 6
2 Normative references . 6
3 Test . 7
4 Test report . 8
5 Performance requirements . 8
5.1 Dimensions . 8
5.2 Sample size, sequencing and grouping . 8
5.3 Test details and requirements . 8
Annex A (normative) A and U requirements of 1 × N and 2 × N NWBDs . 16
A.1 Attenuation and uniformity requirements of 1×N and 2×N NWBDs calculated
by the equations of Tests No.1 and 2 . 16
A.2 Minimum requirements at room temperature of attenuation values for
balanced bidirectional 1 × N and 2 × N NWBD . 17
Annex B (normative) Sequencing and grouping of tests . 19
Bibliography . 20
Table 1 – Test details and requirements (1 of 6) . 9
Table A.1 – Attenuation and uniformity requirements of balanced bidirectional NWBD
having the most common port configurations for Class A, with the underlying formulas
as specified in the Tests 1 and 2 of Table 1 . 16
Table A.2 – Attenuation and uniformity requirements of balanced bidirectional NWBD
having the most common port configurations for Class B, with the underlying formulas
as specified in the Test 1s and 2 of Table 1 . 17
Table A.3 – Attenuation requirements of 1×2 and 2×2 unbalanced NWBD having the
most common port configurations, with the underlying formula as specified in the Test
1 of Table 1 . 17
Table A.4 – Minimum requirements at room temperature of attenuation values for
Class A balanced bidirectional NWBD . 18
Table A.5 – Minimum requirements at room temperature of attenuation values for
Class A balanced bidirectional NWBD . 18
Table B.1 – Sample size for each test . 19
IEC 61753-031-6:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 031-6: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category O –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this pre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.