prEN IEC 61084-2-4:2022/prAA

Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts

Common modifications for the adoption as a European Standard of IEC 61084-2-4:2017 ed 2.0 (PR=72103)

Installationskanalsysteme für elektrische Installationen - Teil 2-4: Besondere Anforderungen - Freistehende Installationseinheiten

Systèmes de goulottes et systèmes de conduits-profilés pour installations électriques - Partie 2-4: Exigences particulières - Colonnes et colonnettes

Sistemi kabelskih korit in sistemi kabelskih cevi za električne inštalacije - 2-4. del: Posebne zahteve - Podporni drogovi in podporni stebri - Dopolnilo AA

General Information

• Status: Not Published
• Publication Date: 21-Dec-2023
• ICS: 29.060.01 - Electrical wires and cables in general
• ICS: 29.120.10 - Conduits for electrical purposes
• Technical Committee: CLC/TC 213 - Cable management systems
• Drafting Committee: CLC/TC 213/WG 01 - Cable trunking systems and cable ducting systems
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 13-Jul-2023
• Due Date: 05-Oct-2022
• Completion Date: 13-Jul-2023
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: oSIST prEN IEC 61084-2-4:2023/oprAA:2023 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts

Relations

• Amends: prEN IEC 61084-2-4:2022 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
• Effective Date: 09-Jun-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
01-februar-2023

Sistemi kabelskih korit in sistemi kabelskih cevi za električne inštalacije - 2-4. del:

Posebne zahteve - Podporni drogovi in podporni stebri - Dopolnilo AA

Cable trunking systems and cable ducting systems for electrical installations - Part 2-4:

Particular requirements - Service poles and service posts

Elektroinstallationskanalsysteme für elektrische Installationen - Teil 2-4: Besondere

Anforderungen für freistehende Installationseinheiten

Systèmes de goulottes et systèmes de conduits-profilés pour installations électriques -

Partie 2-4: Exigences particulières - Colonnes et colonnettes
Ta slovenski standard je istoveten z: prEN IEC 61084-2-4:2022/prAA
ICS:
29.120.10 Inštalacijske cevi za Conduits for electrical
električne namene purposes
oSIST prEN IEC 61084-2- en
4:2023/oprAA:2023

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
EUROPEAN STANDARD DRAFT
prEN IEC 61084-2-4:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
December 2022
ICS 29.060.01; 29.120.10 -
English Version
Cable trunking systems and cable ducting systems for electrical
installations - Part 2-4: Particular requirements - Service poles
and service posts

Systèmes de goulottes et systèmes de conduits-profilés Elektroinstallationskanalsysteme für elektrische

pour installations électriques - Partie 2-4: Exigences Installationen - Teil 2-4: Besondere Anforderungen für

particulières - Colonnes et colonnettes freistehende Installationseinheiten

This draft amendment prAA, if approved, will modify the European Standard prEN IEC 61084-2-4:2022; it is submitted to CENELEC

members for enquiry.
Deadline for CENELEC: 2023-03-03.
It has been drawn up by CLC/TC 213.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to

the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to

provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Project: 72107 Ref. No. prEN IEC 61084-2-4:2022/prAA E
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
prEN IEC 61084-2-4:2022/prAA:2022 (E)
European foreword

This document (prEN IEC 61084-2-4:2022/prAA:2022) has been prepared by CLC/TC 213 “Cable

management systems”.
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced at
national level
• latest date by which this document has (dop) dor + 12 months
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) dor + 60 months
standards conflicting with this document
have to be withdrawn

This document is used in conjunction with prEN IEC 61084-1:2022 and prEN IEC 61084-1:2022/prAA:2022.

This document has been prepared under a Standardization Request given to CENELEC by the European

Commission and the European Free Trade Association, and supports essential requirements of EU

Directive(s) / Regulation(s).

For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an integral part of this

document.
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
prEN IEC 61084-2-4:2022/prAA:2022 (E)
1 Modification to Clause 2, “Normative references”
Replace “ISO 536:2012, Paper and board – Determination of grammage”
“ISO 536:2019, Paper and board – Determination of grammage”.

Replace “ISO 9328-7:2011, Steel flat products for pressure purposes – Technical delivery conditions – Part 7:

Stainless steels“

“EN 10028-7:2016, Flat products made of steels for pressure purposes - Part 7: Stainless steels”.

2 Modification to Clause 9, “Construction”

In 9.104, replace “ISO 535” by “ISO 535:2014” and replace “ISO 536” by “ISO 536:2019”.

3 Modification to Clause 10, “Mechanical properties”
In “10.4 Linear deflection test”:
replace in the fifth paragraph “class 5, Table 3” by “Table 3 - class 5”.

In “10.5.101 Horizontal load test for service poles not likely to be moved during use”:

replace in the fourth paragraph, in the first dash “stainless steel X5CrNi18-9, with a thickness of at least 2 mm

according to ISO 9328-7” by “stainless steel X5CrNi18-10, with a thickness of at least 2 mm according to

EN 10028-7:2016”.
4 Modification to Clause 13, “Fire hazard”
In “13.1.3 Spread of fire”:

replace in the last paragraph “IEC 60695-11-2” by “IEC 60695-11-2:2017 using method B.”

---------------------- Page: 5 ----------------------
oSIST prEN IEC 61084-2-4:2023/oprAA:2023
prEN IEC 61084-2-4:2022/prAA:2022 (E)
5 Addition of Annex C, “Compliance checks to be carried out for cable trunking
systems and cable ducting systems currently complying with EN 50085-2-4:2009
in order to comply with prEN IEC 61084-2-4:2022”
Add the following Annex C:
Annex C
(normative)
Compliance checks to be carried out for cable trunking systems and
cable ducting systems currently complying with EN 50085-2-4:2009 in
order to comply with prEN IEC 61084-2-4:2022

This normative annex relates to prEN IEC 61084-2-4:2022 requirements. It informs where compliance checks

are required and where compliance checks are not required to be carried out in order that cable trunking

systems and cable ducting systems can be declared to meet the requirements of prEN IEC 61084-2-4 if they

already comply with EN 50085-2-4:2009.
Table C.1 — Required compliance checks
Test Description Compliance check
reference
subclause
Marking and documentation
7.1 Marking of system components Not required
7.2 Durability and legibility of marking Not required
7.3 Documentation Not required
7.4 Symbols Not required
Construction
9.1 Sharp edges Not required
9.2 Apparatus mounting Not required
9.3 Me
...