EN 61924-2:2013

Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results

IEC 61924-2:2012(E) specifies the minimum requirements for the design, manufacture, integration, methods of testing and required test results for an integrated navigation system (INS) to comply with the International Maritime Organization (IMO) requirements of Resolution MSC.252(83). In addition, it takes account of IMO Resolution A.694(17) to which IEC 60945 is associated. When a requirement in this standard is different from IEC 60945, the requirement of this standard takes precedence.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Integrierte Navigationssysteme - Teil 2: Modulare Struktur für INS - Betriebs- und Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse

Matériels et systèmes de navigation et de radiocommunication maritimes - Systèmes de navigation intégrés - Partie 2: Structure modulaire pour les INS - Exigences d’exploitation et de fonctionnement, méthodes et résultats d’essais exigés

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Integrirani navigacijski sistemi (INS) - 2. del: Modularna struktura za INS - Zahteve za delovanje in lastnosti, preskusne metode in zahtevani rezultat preskušanja

V tem delu standarda IEC 61924 so opredeljene minimalne zahteve za načrtovanje, izdelavo, integracijo, preskusne metode in zahtevane rezultate preskušanja za integrirane navigacijske sisteme (INS), da so skladni z zahtevami Mednarodne pomorske organizacije (IMO) iz Resolucije MSC.252(83). Poleg tega je upoštevana Resolucija Mednarodne pomorske organizacije A.694(17), s katero je povezan standard IEC 60945. Če se zahteva iz tega standarda razlikuje od zahteve iz standarda IEC 60945, velja zahteva iz tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 14-Mar-2013
• Withdrawal Date: 08-Jan-2016
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: CLC/SR 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: IEC/TC 80 - IEC_TC_80
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Mar-2024
• Completion Date: 19-Mar-2024
• Ref Project: SIST EN 61924-2:2013 - Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results

Relations

• Replaced By: EN IEC 61924-2:2021 - Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results
• Effective Date: 19-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2013
Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Integrirani
navigacijski sistemi (INS) - 2. del: Modularna struktura za INS - Zahteve za
delovanje in lastnosti, preskusne metode in zahtevani rezultat preskušanja
Maritime navigation and radiocommunication equipment and systems - Integrated
navigation systems (INS) - Part 2: Modular structure for INS - Operational and
performance requirements, methods of testing and required test results
/
/
Ta slovenski standard je istoveten z: EN 61924-2:2013
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61924-2
NORME EUROPÉENNE
March 2013
EUROPÄISCHE NORM
ICS 47.020.70
English version
Maritime navigation and radiocommunication equipment and systems -
Integrated navigation systems -
Part 2: Modular structure for INS -
Operational and performance requirements, methods of testing and
required test results
(IEC 61924-2:2012)
Matériels et systèmes de navigation et de Navigations- und
radiocommunication maritimes - Funkkommunikationsgeräte und -systeme
Systèmes de navigation intégrés - für die Seeschifffahrt -
Partie 2: Structure modulaire Integrierte Navigationssysteme -
pour les INS - Teil 2: Modulare Struktur für INS -
Exigences d’exploitation et de Betriebs- und Leistungsanforderungen,
fonctionnement, méthodes et résultats Prüfverfahren und geforderte
d’essais exigés Prüfergebnisse
(CEI 61924-2:2012) (IEC 61924-2:2012)

This European Standard was approved by CENELEC on 2013-01-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61924-2:2013 E
Foreword
The text of document 80/677/FDIS, future edition 1 of IEC 61924-2, prepared by IEC TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61924-2:2013.
The following dates are fixed:
(dop) 2013-10-09
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-09
• latest date by which the national
standards conflicting with the

document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61924-2:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60812:2006 NOTE  Harmonized as EN 60812:2006 (not modified).
IEC 61924:2006 NOTE  Harmonized as EN 61924:2006 (not modified).
ISO 9241-12 NOTE  Harmonized as EN ISO 9241-12.

- 3 - EN 61924-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60945 2002 Maritime navigation and radiocommunication EN 60945 2002
+ corr. April 2008 equipment and systems - General
requirements - Methods of testing and
required test results
IEC 61162 Series Maritime navigation and radiocommunication EN 61162 Series
equipment and systems - Digital interfaces

IEC 61162-1 2010 Maritime navigation and radiocommunication EN 61162-1 2011
equipment and systems - Digital interfaces -
Part 1: Single talker and multiple listeners

IEC 61162-2 - Maritime navigation and radiocommunication EN 61162-2 -
equipment and systems - Digital interfaces -
Part 2: Single talker and multiple listeners,
high-speed transmission
IEC 61162-3 - Maritime navigation and radiocommunication EN 61162-3 -
equipment and systems - Digital interfaces -
Part 3: Serial data instrument network

IEC 61162-450 - Maritime navigation and radiocommunication EN 61162-450 -
equipment and systems - Digital interfaces -
Part 450: Multiple talkers and multiple
listeners - Ethernet interconnection

IEC 61174 2008 Maritime navigation and radiocommunication EN 61174 2008
equipment and systems - Electronic chart
display and information system (ECDIS) -
Operational and performance requirements,
methods of testing and required test results

IEC 62065 2002 Maritime navigation and radiocommunication EN 62065 2002
equipment and systems - Track control
systems - Operational and performance
requirements, methods of testing and required
test results
IEC 62288 2008 Maritime navigation and radiocommunication EN 62288 2008
equipment and systems - Presentation of
navigation-related information on shipborne
navigational displays - General requirements,
methods of testing and required test results

IEC 62388 2007 Maritime navigation and radio-communication EN 62388 2008
equipment and systems - Shipborne radar -
Performance requirements, methods of testing
and required test results
IEC 62616 2010 Maritime navigation and radiocommunication EN 62616 2010
+ corr. August 2012 equipment and systems - Bridge navigational
watch alarm system (BNWAS)
Publication Year Title EN/HD Year
ISO 11674 2006 Ships and marine technology - Heading - -
control systems
IMO A.694(17) - General requirements for shipborne radio - -
equipment forming part of the global maritime
distress and safety system (GMDSS) and for
electronic navigational aids
IMO/ICAO - International Aeronautical and Maritime - -
Search and Rescue Manual (IAMSAR
Manual) Volume 3
IMO MSC/ - Guidelines on ergonomic criteria for bridge - -
Circular 982 equipment and layout

IMO MSC.191(79) - Performance standards for the presentation of - -
navigation-related information on shipborne
navigational displays
IMO MSC.232(82) - Adoption of the revised performance - -
standards for electronic chart display and
information systems (ECDIS)
IMO MSC.252(83) - Performance Standards for Integrated - -
Navigation Systems (INS)
IMO MSC.302(87) - Performance standards for Bridge Alert - -
Management (BAM)
IEC 61924-2 ®
Edition 1.0 2012-12
INTERNATIONAL
STANDARD
colour
inside
Maritime navigation and radiocommunication equipment and systems –

Integrated navigation systems –

Part 2: Modular structure for INS – Operational and performance requirements,

methods of testing and required test results

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XG
ICS 47.020.70 ISBN 978-2-83220-503-7

– 2 – 61924-2 © IEC:2012(E)
CONTENTS
FOREWORD . 7
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviations . 10
3.1 Terms and definitions . 10
3.2 Abbreviations . 19
4 MSC resolutions . 19
4.1 General . 19
4.2 Purpose of integrated navigation systems . 20
4.3 Application . 21
5 Test requirements and results . 23
5.1 General . 23
5.2 Exceptions for tests previously performed . 23
5.3 Test site . 23
5.4 Methods of test. 24
6 Module A – Requirements for integration of navigational information . 24
6.1 Interfacing and data exchange. 24
6.1.1 Combination, processing and evaluation of data . 24
6.1.2 Availability, validity and integrity . 24
6.1.3 Failure of data exchange . 25
6.1.4 Interfaces in general . 25
6.1.5 Interface to alert management . 25
6.2 Accuracy . 25
6.2.1 Requirement . 25
6.2.2 Methods of test and required results . 25
6.3 Validity, plausibility, latency . 26
6.3.1 Validity . 26
6.3.2 Plausibility . 27
6.3.3 Latency . 27
6.4 Consistent common reference system (CCRS) . 28
6.4.1 Consistency of data . 28
6.4.2 Consistent common reference point (CCRP) . 28
6.4.3 Consistency of thresholds . 30
6.5 Integrity monitoring . 31
6.5.1 Requirement . 31
6.5.2 Methods of test and required results . 32
6.6 Marking of data . 33
6.6.1 Requirement . 33
6.6.2 Methods of tests and required results . 33
6.7 Selection of sensors and sources . 33
6.7.1 Requirement . 33
6.7.2 Methods of test and required results . 34
7 Module B – Task related requirements for Integrated Navigation Systems . 34
7.1 Description . 34
7.2 Task and functional requirements for an INS . 35
7.2.1 General .
...