EN 61158-6-3:2012

Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements

IEC 61158-6-3:2010(E) specifies the protocol of the Type 3 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). It defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-3:2010, and the externally visible behavior associated with their transfer. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main changes with respect to the previous edition are: - corrections, in Table 10 and Table 48; - clarification in 6.9.1.2; - expired patents deleted and new patents disclosed.

Industrielle Kommunikationsnetze - Feldbusse - Teil 6-3: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 3-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-3: Spécification des protocoles des couches d'application - Eléments de type 3

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-3. del: Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-6-3:2010)

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 3. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno vedenje, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 3 v zvezi z a) abstraktno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, b) prenosno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, c) strojem stanj aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in d) stroji stanj aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo. Namen tega standarda je opredeliti protokol za a) določitev prikaza primitivov opravil iz standarda IEC 61158-5-3 in b) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom. Ta standard določa protokol aplikacijskega nivoja procesnih vodil tipa 3 v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil. Čeprav ta opravila določajo način izdajanja in dostavljanja zahtev in odzivov z vidika aplikacij, ne zajemajo specifikacije v zvezi s tem, kako naj se nanje odzovejo aplikacije, ki te zahteve in odzive oddajajo. To pomeni, da vedenjski vidiki aplikacij niso opredeljeni; opredeljena je le definicija zahtev in odzivov, ki jih lahko pošiljajo/prejemajo. Tako se uporabnikom aplikacijskega nivoja procesnih vodil omogoči večja prilagodljivost pri standardizaciji takega vedenja objektov. Poleg teh opravil so v tem standardu opredeljena tudi nekatera podporna opravila, da se omogoči dostop do aplikacijskega nivoja procesnih vodil za nadzorovanje nekaterih vidikov njegovega delovanja.

General Information

• Status: Withdrawn
• Publication Date: 21-Jun-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Sep-2017
• Completion Date: 23-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-6-3:2012 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements (IEC 61158-6-3:2010)

Relations

• Replaces: EN 61158-6-3:2008 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
• Effective Date: 28-Jan-2023
• Replaced By: EN 61158-6-3:2014 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
• Effective Date: 29-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-6-3:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-3. del:
Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-6-
3:2010)
Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer
protocol specification - Type 3 elements (IEC 61158-6-3:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-3: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 3-Elemente (IEC 61158-6-3:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-3:
Spécification des protocoles des couches d'application - Eléments de type 3 (CEI 61158-
6-3:2010)
Ta slovenski standard je istoveten z: EN 61158-6-3:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-6-3
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-3:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 6-3: Application layer protocol specification -
Type 3 elements
(IEC 61158-6-3:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 6-3: Spécification des protocoles Teil 6-3: Protokollspezifikation des
des couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 3 Typ 3-Elemente
(CEI 61158-6-3:2010) (IEC 61158-6-3:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-6-3:2012 E
Foreword
The text of document 65C/607/FDIS, future edition 2 of IEC 61158-6-3, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-3:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-6-3:2008.
3:2008:
– corrections, in Table 10 and Table 48;
– clarification in 6.9.1.2;
– expired patents deleted and new patents disclosed.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-6-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC/TR 61158-1:2010 NOTE  Harmonized as CLC/TR 61158-1:2010 (not modified).

- 3 - EN 61158-6-3:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60559 - Binary floating-point arithmetic for HD 592 S1 -
microprocessor systems
IEC 61158-3-3 2007 Industrial communication networks - EN 61158-3-3 2008
Fieldbus specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
IEC 61158-4-3 2010 Industrial communication networks - EN 61158-4-3 2012
Fieldbus specifications -
Part 4-3: Data-link layer protocol specification
- Type 3 elements
IEC 61158-5-3 2010 Industrial communication networks - EN 61158-5-3 2012
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements
IEC 61158-6-10 2010 Industrial communication networks - EN 61158-6-10 2012
Fieldbus specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements

ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

IEC 61158-6-3 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-3: Application layer protocol specification – Type 3 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XN
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-126-7
– 2 – 61158-6-3 © IEC:2010(E)
CONTENTS
FOREWORD.8
INTRODUCTION.10
1 Scope.12
1.1 General .12
1.2 Specifications .13
1.3 Conformance.13
2 Normative references.13
3 Terms, definitions, abbreviations, symbols and conventions .14
3.1 Referenced terms and definitions.14
3.2 Additional definitions.15
3.3 Abbreviations and symbols .18
3.4 Conventions .19
3.5 Conventions used in state machines .21
4 FAL syntax description.24
4.1 APDU abstract syntax.24
4.2 Data types .28
5 Transfer syntax.30
5.1 Coding of basic data types.30
5.2 Coding section related to data exchange PDUs .33
5.3 Coding section related to slave diagnosis PDUs .33
5.4 Coding section related to parameterisation PDU .44
5.5 Coding section related to configurationPDUs.50
5.6 Coding section related to global control PDUs.54
5.7 Coding section related to clock-value-PDUs .55
5.8 Coding section related to function identification and errors .56
5.9 Coding section related to master diagnosis PDU .60
5.10 Coding section related to upload/download/act para PDUs .62
5.11 Coding section related to the bus parameter set.64
5.12 Coding section related to the slave parameter set .66
5.13 Coding section related to statistic counters .70
5.14 Coding section related to set slave address PDU .70
5.15 Coding section related to initiate/abort PDUs .70
5.16 Coding section related to read/write/data transport PDUs .74
5.17 Coding section related to load region and function invocation PDUs .74
5.18 Examples of diagnosis-RES-PDUs.77
5.19 Example of Chk_Cfg-REQ-PDU .79
5.20 Examples of Chk_Cfg-REQ-PDUs with DPV1 data types .80
5.21 Example structure of the Data_Unit for Data_Exchange .81
6 FAL protocol state machines.83
6.1 Overall structure .83
6.2 Assignment of state machines to devices.84
6.3 Overview DP-slave .85
6.4 Overview DP-master (class 1).87
6.5 Overview DP-master (class 2).88
6.6 Cyclic communication between DP-master (class 1) and DP-slave .89
6.7 Acyclic communication between DP-master (class 2) and DP-master (class 1) .90

61158-6-3 © IEC:2010(E) – 3 –
6.8 Acyclic communication between DP-master (class 1) and DP-slave.92
6.9 Application relationship monitoring.94
7 AP-context state machine . 100
8 FAL service protocol machines (FSPMs) . 100
8.1 FSPMS.100
8.2 FSPMM1 .136
8.3 FSPMM2 .172
9 Application relationship protocol machines (ARPMs) . 190
9.1 MSCY1S.190
9.2 MSAC1S. 221
9.3 SSCY1S . 234
9.4 MSRM2S . 237
9.5 MSAC2S. 243
9.6 MSCS1S.
...