EN 61158-6-3:2008

Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements

It provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a 'window between corresponding application programs.' This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 3 fieldbus. The term 'time-critical' is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. It includes the following significant changes from the previous edition deletion of the former Type 6 fieldbus for lack of market relevance; addition of new types of fieldbuses; partition of part 6 of the third edition into multiple parts numbered.

Industrielle Kommunikationsnetze - Feldbusse - Teil 6-3: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 3-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-3: Spécification des protocoles des couches d'application - Eléments de type 3

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-3. del: Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-6-3:2007)

General Information

• Status: Withdrawn
• Publication Date: 30-Mar-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Mar-2015
• Completion Date: 28-Mar-2015
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-6-3:2008 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements

Relations

• Replaces: EN 61158-6:2004 - Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
• Effective Date: 28-Jan-2023
• Replaced By: EN 61158-6-3:2012 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-3. del: Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-6-3:2007)Industrielle Kommunikationsnetze - Feldbusse - Teil 6-3: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 3-ElementeRéseaux de communication industriels - Spécifications des bus de terrain - Partie 6-3: Spécification des services des couches d'application - Eléments de type 3Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements35.110OmreževanjeNetworking35.100.70Uporabniški slojApplication layer25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61158-6-3:2008SIST EN 61158-6-3:2008en,de01-julij-2008SIST EN 61158-6-3:2008SLOVENSKI
STANDARDSIST EN 61158-6:20041DGRPHãþD

EUROPEAN STANDARD EN 61158-6-3 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-6-3:2008 E
ICS 35.100.70; 25.040.40 Partially supersedes EN 61158-6:2004
English version
Industrial communication networks -
Fieldbus specifications -
Part 6-3: Application layer protocol specification -
Type 3 elements (IEC 61158-6-3:2007)
Réseaux de communication industriels -
Spécifications des bus de terrain -
Partie 6-3: Spécification des services
des couches d'application -
Eléments de type 3 (CEI 61158-6-3:2007)
Industrielle Kommunikationsnetze -
Feldbusse -
Teil 6-3: Protokollspezifikation
des Application Layer (Anwendungsschicht) -
Typ 3-Elemente (IEC 61158-6-3:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 -
Foreword The text of document 65C/476/FDIS, future edition 1 of IEC 61158-6-3, prepared by SC 65C, Industrial networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61158-6-3 on 2008-02-01. This and the other parts of the EN 61158-6 series supersede EN 61158-6:2004. With respect to EN 61158-6:2004 the following changes were made: – deletion of Type 6 fieldbus for lack of market relevance; – addition of new fieldbus types; – partition into multiple parts numbered 6-2, 6-3, …6-20. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 NOTE
Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the EN 61784 series. Use of the various protocol types in other combinations may require permission from their respective intellectual-property-right holders. IEC and CENELEC draw attention to the fact that it is claimed that compliance with this standard may involve the use of patents as follows, where the [xx] notation indicates the holder of the patent right:
The following patent rights for Type 3 have been announced:
DE 36 43 979 C2 [SI] Deterministisches Zugriffsverfahren nach dem Tokenprinzip für eine Datenübertragung
DE 36 43 979 A1 [SI]
Deterministisches Zugriffsverfahren nach dem Tokenprinzip für eine Datenübertragung IEC and CENELEC take no position concerning the evidence, validity and scope of these patent rights. The holders of these patent rights have assured IEC that they are willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of these patent rights are registered with IEC. Information may be obtained from:
[SI]: SIEMENS AG
Ludwig Winkel
Siemensallee 73
D-76181 Karlsruhe
Germany Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible for identifying any or all such patent rights. Annex ZA has been added by CENELEC. __________

- 3 - EN 61158-6-3:2008
Endorsement notice The text of the International Standard IEC 61158-6-3:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61784-1 NOTE
Harmonized as EN 61784-1:2008 (not modified). IEC 61784-2 NOTE
Harmonized as EN 61784-2:2008 (not modified). __________

- 4 -
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60559 - 1) Binary floating-point arithmetic for
microprocessor systems HD 592 S1 1991 2)
IEC 61158-3-3 - 1) Industrial communication networks -
Fieldbus specifications -
Part 3-3: Data-link layer service definition - Type 3 elementsEN 61158-3-3 2008 2)
IEC 61158-4-3 - 1) Industrial communication networks -
Fieldbus specifications -
Part 4-3: Data-link layer protocol
specification - Type 3 elements
EN 61158-4-3 2008 2)
IEC 61158-5-3 - 1) Industrial communication networks -
Fieldbus specifications -
Part 5-3: Application layer service definition - Type 3 elements EN 61158-5-3 2008 2)
ISO/IEC 7498-1 - 1) Information technology - Open Systems Interconnection - Basic Reference Model:
The Basic ModelEN ISO/IEC 7498-1 1995 2)
ISO/IEC 8822 - 1) Information technology - Open Systems Interconnection - Presentation service definition - -
ISO/IEC 8824-2 - 1) Information technology - Abstract Syntax Notation One (ASN.1): Information object specification - -
ISO/IEC 9545 - 1) Information technology - Open Systems Interconnection - Application Layer structure - -
ISO/IEC 10731 - 1) Information technology - Open Systems Interconnection - Basic reference model - Conventions for the definition of OSI services - -
1) Undated reference.
2) Valid edition at date of issue.

IEC 61158-6-3Edition 1.0 2007-12INTERNATIONAL STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-3: Application layer protocol specification – Type 3 elements
INTERNATIONAL ELECTROTECHNICAL COMMISSION XNICS 35.100.70; 25.040.40 PRICE CODEISBN 2-8318-9475-1

– 2 – 61158-6-3 © IEC:2007(E) CONTENTS FOREWORD.8 INTRODUCTION.10 1 Scope.11 1.1 General.11 1.2 Specifications.12 1.3 Conformance.12 2 Normative references.12 3 Terms, definitions, abbreviations, symbols and conventions.13 3.1 Referenced terms and definitions.13 3.2 Additional definitions.14 3.3 Abbreviations and symbols.17 3.4 Conventions.19 3.5 Conventions used in state machines.21 4 FAL syntax description.24 4.1 APDU abstract syntax.24 4.2 Data types.28 5 Transfer syntax.30 5.1 Coding of basic data types.30 5.2 Coding section related to data exchange PDUs.33 5.3 Coding section related to slave diagnosis PDUs.33 5.4 Coding section related to parameterisation PDU.44 5.5 Coding section related to configurationPDUs.50 5.6 Coding section related to global control PDUs.54 5.7 Coding section related to clock-value-PDUs.55 5.8 Coding section related to function identification and errors.56 5.9 Coding section related to master diagnosis PDU.60 5.10 Coding section related to upload/download/act para PDUs.62 5.11 Coding section related to the bus parameter set.64 5.12 Coding section related to the slave parameter set.66 5.13 Coding section related to statistic counters.70 5.14 Coding section related to set slave address PDU.70 5.15 Coding section related to initiate/abort PDUs.70 5.16 Coding section related to read/write/data transport PDUs.74 5.17 Coding section related to load region and function invocation PDUs.74 5.18 Examples of diagnosis-RES-PDUs.77 5.19 Example of Chk_Cfg-REQ-PDU.79 5.20 Examples of Chk_Cfg-REQ-PDUs with DPV1 data types.80 5.21 Example structure of the Data_Unit for Data_Exchange.81 6 FAL protocol state machines.83 6.1 Overall structure.83 6.2 Assignment of state machines to devices.84 6.3 Overview DP-slave.85 6.4 Overview DP-master (class 1).87 6.5 Overview DP-master (class 2).88 6.6 Cyclic communication between DP-master (class 1) and DP-slave.89 6.7 Acyclic communication between DP-master (class 2) and DP-master (class 1).90 6.8 Acyclic communication between DP-master (class 1) and DP-slave.92

61158-6-3 © IEC:2007(E) – 3 –
6.9 Application relationship monitoring.94 7 AP-context state machine.99 8 FAL service protocol machines (FSPMs).99 8.1 FSPMS.99 8.2 FSPMM1.134 8.3 FSPMM2.170 9 Application relationship protocol machines (ARPMs).189 9.1 MSCY1S.189 9.2 MSAC1S.221 9.3 SSCY1S.
...