EN 60794-2-22:2017

Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors

IEC 60794-2-22: 2016 is a detail specification and specifies breakout optical cables with multiple simplex fibre cables for termination with connectors. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this document. The requirements of the family specification IEC 60794-2-20 are applicable to breakout cables to be installed without terminated connectors. Fan-out kits used for cable systems are not covered by this document. Keywords: breakout optical cables with multiple simplex fibre cables

Lichtwellenleiterkabel - Teil 2-22: LWL-Innenkabel - Bauartspezifikation für mit Steckverbinder abzuschließende Simplex-Breakout-Kabel

Câbles à fibres optiques - Partie 2-22: Câbles intérieurs - Spécification particulière pour câbles optiques épanouis simplex multiples munis de connecteurs

L'IEC 60794-2-22: 2016 est une spécification particulière pour les câbles optiques épanouis avec plusieurs câbles à fibres simplex équipés de connecteurs. Les exigences de la spécification intermédiaire IEC 60794-2 sont applicables aux câbles couverts par le présent document. Les exigences de la spécification de famille IEC 60794-2-20 sont applicables aux câbles épanouis destinés à être installés sans connecteurs. Les kits d'éclatement utilisés dans les systèmes de câbles ne sont pas couverts par le présent document. Mots clés: câbles optiques épanouis avec plusieurs câbles à fibres simplex

Optični kabli - 2-22. del: Notranji optični kabli - Podrobna specifikacija večsimpleksnih odporno oplaščenih optičnih kablov, ki se zaključujejo s konektorjem (IEC 60794-2-22:2016)

Ta del standarda IEC 60794 je podrobna specifikacija in določa večsimpleksne odporno-oplaščene optične kable, ki se zaključujejo s konektorji.
Zahteve področne specifikacije IEC 60794-2 se uporabljajo za kable, ki jih zajema ta dokument.
Zahteve skupinske specifikacije IEC 60794-2-20 se uporabljajo za odporno-oplaščene kable, ki se nameščajo brez končnih konektorjev.
Izhodni kompleti za kabelske sisteme niso zajeti v tem dokumentu.

General Information

• Status: Published
• Publication Date: 16-Mar-2017
• Withdrawal Date: 10-Jan-2020
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 17-Mar-2017
• Completion Date: 17-Mar-2017
• Ref Project: SIST EN 60794-2-22:2017 - Optical fibre cables - Part 2-22: Indoor optical fibre cables - Detail specification for multi-simplex breakout optical cables to be terminated with connector (IEC 60794-2-22:2016)

Relations

• Replaced By: EN IEC 60794-2-22:2023 - Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies
• Effective Date: 04-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60794-2-22:2017
01-maj-2017
2SWLþQLNDEOLGHO1RWUDQMLRSWLþQLNDEOL3RGUREQDVSHFLILNDFLMD
YHþVLPSOHNVQLKRGSRUQRRSODãþHQLKRSWLþQLKNDEORYNLVH]DNOMXþXMHMRV
NRQHNWRUMHP,(&
Optical fibre cables - Part 2-22: Indoor optical fibre cables - Detail specification for multi-
simplex breakout optical cables to be terminated with connector (IEC 60794-2-22:2016)
Ta slovenski standard je istoveten z: EN 60794-2-22:2017
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60794-2-22:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60794-2-22:2017

---------------------- Page: 2 ----------------------

SIST EN 60794-2-22:2017


EUROPEAN STANDARD EN 60794-2-22

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2017
ICS 33.180.10

English Version
Optical fibre cables - Part 2-22: Indoor cables -
Detail specification for multi-simplex breakout optical cables to
be terminated with connectors
(IEC 60794-2-22:2016)
Câbles à fibres optiques - Partie 2-22: Câbles intérieurs - Lichtwellenleiterkabel - Teil 2-22: LWL-Innenkabel -
Spécification particulière pour câbles optiques épanouis Bauartspezifikation für mit Steckverbinder abzuschließende
simplex multiples munis de connecteurs Simplex-Breakout-Kabel
(IEC 60794-2-22:2016) (IEC 60794-2-22:2016)
This European Standard was approved by CENELEC on 2017-01-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60794-2-22:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60794-2-22:2017
EN 60794-2-22:2017
European foreword
The text of document 86A/1765/FDIS, future edition 1 of IEC 60794-2-22, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60794-2-22:2017.
The following dates are fixed:
(dop) 2017-10-11
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-01-11
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60794-2-22:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 61753-1 NOTE Harmonized as EN 61753-1.
2

---------------------- Page: 4 ----------------------

SIST EN 60794-2-22:2017
EN 60794-2-22:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex
...