EN 61158-6-19:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
IEC 61158-6-19:2014 defines the protocol provided to define the FAL user at the boundary between the user and the Application Layer of the Fieldbus Reference Model, and Systems Management at the boundary between the Application Layer and Systems Management of the Fieldbus Reference Model. This standard specifies the structure and services of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are: - introducing connections based on a producer-consumer model; - introducing additional mechanisms to realize features such as timestamping and oversampling; - improving the hotplug and redundancy features; - improving the phase switching and the error handling; - editorial improvements.
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 19-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-19: Spécification du protocole de la couche application - Eléments de type 19
L'IEC 61158-6-19:2014 décrit le protocole mis en place pour la présente norme vise à définir les services mis en place pour l'utilisateur de la couche FAL, à la frontière entre l'utilisateur et la couche Application du modèle de référence de bus de terrain, et la gestion des systèmes, à la frontière entre la couche Application et la gestion des systèmes du modèle de référence de bus de terrain. La présente norme spécifie la structure et les services de la couche Application de bus de terrain de la CEI, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498) et la structure de la couche Application OSI (ISO/CEI 9545). Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Les principales modifications sont: - introduction des connexions basées sur un modèle producteur-consommateur; - introduction des mécanismes complémentaires pour la mise en oeuvre de fonctions telles que l'horodatage et le sur-échantillonnage; - amélioration des caractéristiques de connexion à chaud et de redondance; - amélioration de la commutation des phases et de la gestion des erreurs; - améliorations rédactionnelles.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-19. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 19 (IEC 61158-6-19:2014 )
IEC 61158-6-19:2014 določa protokol, ki zagotavlja opredelitev uporabnika FAL na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnega vmesnika in upravljanjem sistemov na meji med aplikacijskim nivojem in upravljanjem sistemov referenčnega modela procesnega vodila. Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Ta tretja izdaja razveljavlja in nadomešča drugo izdajo, objavljeno leta 2010, in predstavlja tehnično popravljeno izdajo. Glavne spremembe so:
– uvedba povezav na osnovi modela proizvajalec-potrošnik;
– uvedba dodatnih mehanizmov za uresničevanje funkcij, kot sta časovni žig in nadvzorčenje;
– izboljšanje funkcij »hotplug« (priključitev me delovanjem) in funkcije redundance;
– izboljšanje preklapljanja faz in obravnavanja napak;
– redakcijske izboljšave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-6-19:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-19. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 19 (IEC 61158-6-
19:2014 )
Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer
protocol specification - Type 19 elements (IEC 61158-6-19:2014 )
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 19-Elemente (IEC 61158-6-19:2014 )
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-19:
Spécification du protocole de la couche application - Eléments de type 19 (CEI 61158-6-
19:2014 )
Ta slovenski standard je istoveten z: EN 61158-6-19:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-6-19
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-19:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-19: Application layer protocol specification - Type 19
elements
(IEC 61158-6-19:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-19:
bus de terrain - Partie 6-19: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 19 (Anwendungsschicht) - Typ 19-Elemente
(CEI 61158-6-19:2014) (IEC 61158-6-19:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-19:2014 E
Foreword
The text of document 65C/764/FDIS, future edition 3 of IEC 61158-6-19, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-19:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61158-6-19:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-19:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131 NOTE Harmonized in EN 61131 series.
IEC 61158-1 NOTE Harmonized as EN 61158-1.
IEC 61158-4-16 NOTE Harmonized as EN 61158-4-16.
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
IEC 61800 NOTE Harmonized in EN 61800 series.
- 3 - EN 61158-6-19:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-3-19 - Industrial communication networks - EN 61158-3-19 -
Fieldbus specifications -
Part 3-19: Data-link layer service
definition - Type 19 elements
IEC 61158-4-19 - Industrial communication networks - EN 61158-4-19 -
Fieldbus specifications -
Part 4-19: Data-link layer protocol
specification - Type 19 elements
IEC 61158-5-19 - Industrial communication networks - EN 61158-5-19 -
Fieldbus specifications -
Part 5-19: Application layer service
definition - Type 19 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic reference model:
The basic model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
IEC 61158-6-19 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 6-19: Application layer protocol specification – Type 19 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 6-19: Spécification du protocole de la couche application – Eléments
de type 19
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1765-8
– 2 – IEC 61158-6-19:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 General . 7
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 8
3 Terms, definitions, abbreviations, symbols and conventions . 9
3.1 Referenced terms and definitions . 9
3.2 Additional terms and definitions . 10
3.3 Additional abbreviations and symbols . 11
3.4 Conventions . 11
4 Abstract syntax . 12
5 Transfer syntax . 12
5.1 Introduction . 12
5.2 RTC PDU merged abstract and transfer syntax . 12
6 Structure of FAL protocol state machines . 12
7 AP-context state machine . 14
7.1 Overview . 14
7.2 States . 14
7.3 States, events and transitions . 14
8 FAL service protocol machine (FSPM) . 15
8.1 Overview . 15
8.2 MGT services . 15
8.3 IDN services . 16
8.4 CYCIDN services . 16
9 Application relationship protocol machine (ARPM) . 17
9.1 Overview . 17
9.2 Master ARPM . 17
9.3 Slave ARPM . 18
9.4 Primitives received from the FSPM . 19
9.5 Indications received from the DMPM . 21
10 DLL mapping protocol machine (DMPM) . 22
10.1 Overview . 22
10.2 Primitives received from the ARPM . 22
10.3 Indications received from the DL . 22
Bibliography . 23
Figure 1 – Relationships among protocol machines and adjacent layers . 13
Figure 2 – APCSM state diagram . 14
Figure 3 – ARPM master AR state diagram . 17
Figure 4 – ARPM slave AR state diagram . 18
Table 1 – RTC PDU attribute format . 12
IEC 61158-6-19:2014 © IEC 2014 – 3 –
Table 2 – APCSM state-event table . 15
Table 3 – Master ARPM state-event table . 18
Table 4 – Slave ARPM state-event table . 19
Table 5 – ARPM to DL mapping . 22
Table 6 – DL to ARPM mapping . 22
– 4 – IEC 61158-6-19:2014 © IEC 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 6-19: Application layer protocol specification –
Type 19 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees).
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.