Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors

This Technical Specification is for shock detectors installed in buildings to detect the shock or series of shocks due to a forcible attack through a physical barrier (for example doors or windows). It provides for security Grades 1-4 (see EN 50131-1), specific or non specific wired or wire-free detectors and uses Environmental Classes i-iv (see EN 50130-5). This Technical Specification does not include requirements for detectors intended to protect for example vaults and safes from penetration attacks from e.g. drilling, cutting or thermal lance. This Technical Specification does not include requirements for shock detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified grade. Functions additional to the mandatory functions specified in this Technical Specification may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This Technical Specification does not apply to system interconnections.

Alarmanlagen - Einbruchmeldeanlagen - Teil 2-8: Anforderungen an Erschütterungsmelder

Systèmes d'alarme - Systèmes d'alarme contre l’intrusion et les hold-up - Partie 2-8: Détecteurs d’intrusion - Détecteurs de chocs

Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-8. del: Javljalniki vloma - Javljalniki udara

Ta tehnična specifikacija se uporablja za javljalnike udara, nameščene v stavbah za javljanje udara ali serije udarov zaradi nasilnega napada skozi fizično oviro (na primer vrata ali okna). Določa varnostne razrede 1–4 (glejte EN 50131-1), specifične ali nespecifične ožičene ali brezžične detektorje ter uporablja okoljske razrede i–iv (glejte EN 50130-5). Ta tehnična specifikacija ne zajema zahtev za detektorje, namenjene zaščiti trezorjev in sefov pred vdori z npr. vrtanjem, rezanjem ali toplotnim obsevanjem. Ta tehnična specifikacija ne zajema zahtev za javljalnike udara, namenjene za zunanjo uporabo. Detektor mora izpolnjevati vse zahteve določenega razreda. Poleg obveznih funkcij, ki so opredeljene v tej tehnični specifikaciji, ima lahko detektor tudi dodatne funkcije, pri čemer te ne smejo neugodno vplivati na pravilno delovanje obveznih funkcij. Ta tehnična specifikacija se ne uporablja za povezave sistema.

General Information

Status
Withdrawn
Publication Date
12-Apr-2012
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Oct-2019
Completion Date
03-Oct-2019

Relations

Buy Standard

Technical specification
TS CLC/TS 50131-2-8:2012
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2012
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-8. del: Javljalniki vloma -
Javljalniki udara
Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock
detectors
Alarmanlagen - Einbruchmeldeanlagen - Teil 2-8: Anforderungen an
Erschütterungsmelder
Systèmes d’alarme - Systèmes de détection d’intrusion - Partie 2-8: Indicateur de choc
Ta slovenski standard je istoveten z: CLC/TS 50131-2-8:2012
ICS:
13.310 Varstvo pred kriminalom Protection against crime
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CLC/TS 50131-2-8
SPÉCIFICATION TECHNIQUE
April 2012
TECHNISCHE SPEZIFIKATION
ICS 13.320
English version
Alarm systems -
Intrusion and hold-up systems -
Part 2-8: Intrusion detectors -
Shock detectors
Systèmes d'alarme -  Alarmanlagen -
Systèmes d'alarme contre l’intrusion et les Einbruchmeldeanlagen -
hold-up - Teil 2-8: Anforderungen an
Partie 2-8: Détecteurs d’intrusion - Erschütterungsmelder
Détecteurs de chocs
This Technical Specification was approved by CENELEC on 2012-01-23.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to
make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting
national standards in force.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TS 50131-2-8:2012 E

Contents Page
Foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 6
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 Functional requirements . 8
4.1 General . 8
4.2 Event Processing . 8
4.3 Detection . 10
4.3.1 Detection performance . 10
4.3.2 Indication of detection . 10
4.4 Immunity to false alarm sources . 11
4.4.1 General . 11
4.4.2 Immunity to Small objects hitting a framed window . 11
4.4.3 Immunity to Hard objects hitting a framed window . 11
4.4.4 Immunity to Static pressure . 11
4.4.5 Immunity to Dynamic pressure . 11
4.4.6 Standard Immunity Test . 11
4.5 Operational requirements . 11
4.5.1 Time interval between intrusion signals or messages . 11
4.5.2 Switch on delay . 12
4.5.3 Self tests . 12
4.6 Tamper security . 12
4.6.1 General . 12
4.6.2 Resistance to and detection of unauthorised access to components and means of adjustment . 13
4.6.3 Detection of removal from the mounting surface . 13
4.6.4 Resistance to magnetic field interference . 13
4.6.5 Detection of masking . 13
4.7 Electrical requirements . 14
4.7.1 General . 14
4.7.2 Shock detectors current consumption . 14
4.7.3 Slow input voltage change and voltage range limits . 14
4.7.4 Input voltage ripple. 14
4.7.5 Input voltage step change . 14
4.8 Environmental classification and conditions . 14
4.8.1 Environmental classification . 14
4.8.2 Immunity to environmental conditions . 15
5 Marking, identification and documentation . 15
5.1 Marking and/or identification . 15
5.2 Documentation . 15
6 Testing . 15
6.1 General . 15
6.2 General test conditions . 16
6.2.1 Standard conditions for testing . 16
6.2.2 General detection testing environment and procedures . 16
6.3 Basic Detection Test . 16
6.3.1 General . 16
6.3.2 Basic Detection Test Method . 16
6.4 Performance tests . 17
6.4.1 General . 17
6.4.2 Verification of detection performance . 17
6.5 Switch-on delay, time interval between signals and indication of detection . 18
6.6 Self tests . 19
6.7 Immunity to incorrect operation . 19

- 3 - CLC/TS 50131-2-8:2012
6.7.1 General . 19
6.7.2 Immunity to Small objects hitting the glass . 19
6.7.3 Immunity to Hard objects hitting a framed window . 20
6.7.4 Immunity to Static pressure . 20
6.7.5 Immunity to Dynamic pressure . 21
6.7.6 Standard Immunity Test . 21
6.8 Tamper security . 22
6.8.1 General . 22
6.8.2 Resistance to and detection of unauthorised access to the inside of the shock detector through
covers and existing holes . 22
6.8.3 Detection of removal from the mounting surface . 22
6.8.4 Resistance to magnetic field interference . 22
6.8.5 Detection of shock detector masking . 23
6.9 Electrical tests. 23
6.9.1 General . 23
6.9.2 Shock detector current consumption . 23
6.9.3 Slow input voltage change and input voltage range limits . 24
6.9.4 Input voltage ripple . 24
6.9.5 Input voltage step change . 25
6.9.6 Total loss of power supply . 25
6.10 Environmental classification and conditions . 25
6.11 Marking, identification and documentation . 27
6.11.1 Marking and/or identification . 27
6.11.2 Documentation . 27
Annex A (normative) Standard test material .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.