iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

CLC/TS 50131-2-8:2012/IS1:2014

Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors

Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors

This Technical Specification is for shock detectors installed in buildings to detect the shock or series of shocks due to a forcible attack through a physical barrier (for example doors or windows). It provides for security Grades 1-4 (see EN 50131-1), specific or non specific wired or wire-free detectors and uses Environmental Classes i-iv (see EN 50130-5). This Technical Specification does not include requirements for detectors intended to protect for example vaults and safes from penetration attacks from e.g. drilling, cutting or thermal lance. This Technical Specification does not include requirements for shock detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified grade. Functions additional to the mandatory functions specified in this Technical Specification may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This Technical Specification does not apply to system interconnections.

Alarmanlagen - Einbruchmeldeanlagen - Teil 2-8: Anforderungen an Erschütterungsmelder

Systèmes d'alarme - Systèmes d'alarme contre l’intrusion et les hold-up - Partie 2-8: Détecteurs d’intrusion - Détecteurs de chocs

Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-8. del: Javljalniki vloma - Javljalniki udara - Dopolnilo IS1

General Information

Status
Withdrawn
Publication Date
27-Feb-2014
ICS
13.320 - Alarm and warning systems
Technical Committee
CLC/TC 79 - Alarm systems
Drafting Committee
CLC/TC 79 - Alarm systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
03-Oct-2019
Ref Project
SIST-TS CLC/TS 50131-2-8:2012/IS1:2014 - Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors

Relations

Replaced By
EN 50131-2-8:2016 - Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
Effective Date
20-Sep-2022
Revised
CLC/TS 50131-2-8:2012 - Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
Effective Date
28-Jan-2023

Buy Standard

TS CLC/TS 50131-2-8:2012/IS1:2014TS CLC/TS 50131-2-8:2012/IS1:2014
PreviousNext
Addendum
TS CLC/TS 50131-2-8:2012/IS1:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2014
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 2-8. del: Javljalniki vloma -
Javljalniki udara - Dopolnilo IS1
Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock
detectors
Alarmanlagen - Einbruchmeldeanlagen - Teil 2-8: Anforderungen an
Erschütterungsmelder
Systèmes d'alarme - Systèmes d'alarme contre l’intrusion et les hold-up - Partie 2-8:
Détecteurs d’intrusion - Détecteurs de chocs
Ta slovenski standard je istoveten z: CLC/TS 50131-2-8:2012/IS1:2014
ICS:
13.310 Varstvo pred kriminalom Protection against crime
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST-TS CLC/TS 50131-2- en,fr,de
8:2012/IS1:2014
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERPRETATION SHEET
CLC/TS 50131-2-8/IS1
FEUILLE D'INTERPRETATION
February 2014
INTERPRETATIONSBLATT
ICS 13.320
English version
Alarm systems -
Intrusion and hold-up systems -
Part 2-8: Intrusion detectors -
Shock detectors
Systèmes d'alarme -  Alarmanlagen -
Systèmes d'alarme contre l’intrusion et les Einbruchmeldeanlagen -
hold-up - Teil 2-8: Anforderungen an
Partie 2-8: Détecteurs d’intrusion - Erschütterungsmelder
Détecteurs de chocs
This Technical Specification was approved by CENELEC on 2013-12-23.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to
make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting
national standards in force.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TS 50131-2-8:2012/IS1:2014 E

Contents Page
Foreword . 3
Clause: . 4
Question: . 4
Interpretation: . 4
Validity: . 4

CLC/TS 50131-2-8:2012/IS1:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62676-5-1:2024(Main)
Video surveillance systems for use in security applications - Part 5-1: Data specifications and image quality performance for camera devices - Environmental test methods for image quality performance
SIST EN IEC 62676-5-1:2024

IEC 62676-5-1:2024 defines measuring methods for performance values of video surveillance camera equipment and defines image quality tests under the given temperature and humidity environment. This document is mainly targeting cameras with integrated lenses as the lenses are a major component that can impact the results. If the lens is selectable, the lens will be stated together with the results.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62676-2-11:2024(Main)
Video Surveillance Systems (VSS) for use in security applications - Part 2-11: Video transmission protocols - Interop profiles for VMS and cloud VSaaS systems for safe cities and law enforcement
SIST EN IEC 62676-2-11:2024

IEC 62676-2-11:2024 defines minimum requirement profiles for Video Management Systems (VMS) and cloud Video-Surveillance-as-a-Service (VSaaS) Systems to optimize interfacing with third parties. It defines minimum required VMS interoperability levels from video export to exclusive video control, for the sake of remote support, for example in crisis situations, regulating governmental organizations, national law enforcement, private security service companies, public transport operators and other authorities. This document is intended to set the common technical basis for national regulations requiring inter-organizational remote, local or on-site access, for example so that authorities can be granted temporary access to the VSS in the case of emergency situations. This standard is accordingly expected to supersede ISO 22311 (Societal Security - Video-surveillance - Export interoperability).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
SIST EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises. This document - specifies: - technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing; - the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file; - associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security; - three different grades of safety/security, with the respective product functionalities required to achieve them; - the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities; - the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers; - describes: - the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS; - is intended to support the implementation of: - National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws); - gives relevant guidance on: - the organizational risk management; - does not replace the specifications of standards to the following systems: - fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems, - security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems, - applicable national standards on call systems. All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems. Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met. This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management. This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50518:2019/A1:2023(Amendment)
Monitoring and Alarm Receiving Centre
SIST EN 50518:2019/A1:2023

This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems. This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC. The categorization is determined according to the type(s) of alarm messages handled. Category I: ARCs handling messages from security applications: - I&HAS’s; - access control systems; - VSS in security applications that require an emergency response (for example loss prevention); - people monitoring, lone workers and object tracking systems for security applications; - alarm messages handled by category II ARCs; - combinations of the above systems. Category II: ARC’s handling messages from non-security applications: - fire alarm systems; - fixed firefighting systems; - social alarm systems; - audio/video door entry systems; - VSS in non-security applications (for example traffic flow); - people monitoring, lone workers and object tracking systems for non-security applications; - lifts emergency systems; - combinations of the above systems. The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site. The document includes functional and specific requirements supporting the services of an ARC. The document does NOT apply to: - alarm systems used for non-civil purposes; - alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50136-2:2013/A1:2023(Amendment)
Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)
SIST EN 50136-2:2013/A1:2023

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62676-2-33:2022(Main)
Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access
SIST EN IEC 62676-2-33:2022

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification. Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50136-10:2022(Main)
Alarm systems - Alarm transmission systems and equipment - Part 10: Requirements for remote access
SIST-TS CLC/TS 50136-10:2022

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems. This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure. This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply. This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62820-1-1:2016/A11:2021(Amendment)
Building intercom systems - Part 1-1: System requirements - General
SIST EN 62820-1-1:2017/A11:2022

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50131-2-3:2021(Main)
Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors
SIST EN 50131-2-3:2022

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors. The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system. The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade. Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions. Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60839-11-33:2021(Main)
Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration based on Web services
SIST EN IEC 60839-11-33:2021

This part of IEC 60839 defines the Web services interface for electronic access control systems. This includes listing electronic access control system components, their logical composition, monitoring their states and controlling them. It also includes a mapping of mandatory and optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B. This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building, room, etc. Web services usage and device management functionality are outside the scope of this document. Refer to IEC 60839-11-31:2016 for more information. This document does not in any way limit a manufacturer to add other protocols or extend the protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day