EN 60068-2-43:2003
(Main)Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
Provides accelerated means to assess the effects of the tarnishing of silver and silver alloys used for contacts and connections.
Umweltprüfungen - Teil 2-43: Prüfungen - Prüfung Kd: Hydrogensulfid für Kontakte und Verbindungen
Essai d'environnement - Partie 2-43: Essais - Essai Kd: Essai à l'hydrogène sulfuré pour contacts et connexions
Fournit une procédure accélérée pour vérifier les effets du ternissement de l'argent et des alliages d'argent utilisés dans les contacts et connexions.
Okoljsko preskušanje – 2-43. del: Preskusi - Preskus Kd: Preskus z vodikovim sulfidom za kontakte in spoje (IEC 60068-2-43:2003)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 60068-2-43:2005
STANDARD
marec 2005
Okoljsko preskušanje – 2-43. del: Preskusi - Preskus Kd: Preskus z vodikovim
sulfidom za kontakte in spoje (IEC 60068-2-43:2003)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for
contacts and connections (IEC 60068-2-43:2003)
ICS 19.040; 29.020 Referenčna številka
SIST EN 60068-2-43:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60068-2-43
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2003
ICS 31.220.10
English version
Environmental testing
Part 2-43: Tests –
Test Kd: Hydrogen sulphide test
for contacts and connections
(IEC 60068-2-43:2003)
Essais d'environnement Umweltprüfungen
Partie 2-43: Essais – Teil 2-43: Prüfungen –
Essai Kd: Essai à l'hydrogène sulfuré Prüfung Kd: Hydrogensulfid
pour contacts et connexions für Kontakte und Verbindungen
(CEI 60068-2-43:2003) (IEC 60068-2-43:2003)
This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60068-2-43:2003 E
---------------------- Page: 2 ----------------------
EN 60068-2-43:2003 - 2 -
Foreword
The text of document 48B/1325/FDIS, future edition 2 of IEC 60068-2-43, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60068-2-43 on 2003-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-09-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60068-2-43:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1:1994 (not modified).
IEC 60068-2-46 NOTE Harmonized as HD 323.2.46 S1:1988 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60068-2-43:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-2-1 2002 Connectors for electronic equipment - EN 60512-2-1 2002
Tests and measurements
Part 2-1: Electrical continuity and
contact resistance tests - Test 2a:
Contact resistance - Mil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.