FprHD 60364-7-711:2025/FprAA:2026
(Amendment)Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes
- Abstract
The particular requirements of this part of IEC 60364 apply to the temporary electrical installations of exhibitions, shows and stands (including mobile and portable displays and equipment).
- Status
- Not Published
- Publication Date
- 08-Apr-2027
- Technical Committee
- CLC/TC 64 - Electrical installations and protection against electric shock
- Drafting Committee
- CLC/TC 64/WG 16 - Exhibitions, shows and stands
FprHD 60364-7-711:2025/FprAA:2026 is a CENELEC draft amendment for low-voltage electrical installations used temporarily at exhibitions, shows and stands. It covers temporary installations for exhibition and entertainment-related purposes, including mobile and portable displays and equipment, and it is under enquiry before possible approval.
What does FprHD 60364-7-711:2025/FprAA:2026 specify?
FprHD 60364-7-711:2025/FprAA:2026 sets the particular requirements for temporary electrical installations in exhibition and entertainment settings. In practice, it is the part of the low-voltage installation framework that applies when electrical equipment is set up for temporary use rather than permanent building services.
The document is organized as a European foreword plus three annexes. Annex ZA gives the linkage to European publications, Annex ZB sets out special national conditions, and Annex ZC lists A-deviations.
| Annex | What it covers |
|---|---|
| Annex ZA | Normative references to international publications with their corresponding European publications |
| Annex ZB | Special national conditions |
| Annex ZC | A-deviations |
What are the key requirements of FprHD 60364-7-711:2025/FprAA:2026?
FprHD 60364-7-711:2025/FprAA:2026 is shaped not only by the common low-voltage installation framework, but also by country-specific conditions in Annex ZB. For a designer or installer, the practical point is that temporary exhibition wiring, protection, earthing and equipment selection can be subject to different national rules depending on where the installation is used.
Protective disconnection and RCD use
FprHD 60364-7-711:2025/FprAA:2026 includes national conditions on residual current device (RCD) use, especially in Austria, Switzerland, Germany and the United Kingdom. The practical effect is that fault protection and disconnection method may have to be chosen differently for general circuits, final circuits and higher-current circuits.
Earthing and equipotential bonding
FprHD 60364-7-711:2025/FprAA:2026 includes a German national condition requiring low-resistance connection of electrically conductive parts that can become dangerous to the main earth terminal or the protective conductor. That matters at temporary stages, trusses, tents and similar structures where touch voltages can build up across metalwork.
Cables, outlets and wiring systems
FprHD 60364-7-711:2025/FprAA:2026 also includes national conditions on cable selection and outlets, especially in the Netherlands and Switzerland. For users, this means the cable type, outlet selection and wiring system must match the external influences and, where applicable, national product or construction rules.
Fire safety and legal alignment
FprHD 60364-7-711:2025/FprAA:2026 notes that some national rules defer to separate fire-safety legislation or other national legal requirements. In practice, a compliant installation still has to fit the local legal framework for events and associated premises.
National application notes
FprHD 60364-7-711:2025/FprAA:2026 includes national notes that some clauses are not applicable in certain countries, while other sections of Part 7 may also apply. This is important for anyone comparing one national installation practice with another, because the harmonized text is not the only rule in force.
What terms does FprHD 60364-7-711:2025/FprAA:2026 define?
- Special national condition - A national characteristic or practice that cannot be changed even over a long period; where it affects harmonization, it becomes part of the Harmonization Document for the countries concerned.
- A-deviation - A national deviation caused by regulations outside the competence of the CENELEC national member; it replaces the corresponding provision in the countries where it applies.
- RCD - Residual current device, used here as a protective device for automatic disconnection under fault conditions.
- Cable protector - A tapered mobile protective channel placed flat on the floor to route cables in an ordered way.
- Harmonization Document - The European electrotechnical document type used here to align national installation rules while still allowing listed national conditions.
Who uses FprHD 60364-7-711:2025/FprAA:2026?
FprHD 60364-7-711:2025/FprAA:2026 is used by engineers, electricians, event installers and inspection teams working on temporary electrical installations for exhibitions, shows and stands. It is also relevant to buyers and project managers who must specify equipment and wiring that fit the local installation rules.
The document is also used by national electrotechnical committees when implementing the amendment nationally, and by organizations working in entertainment-related premises, fairground-type structures and temporary display environments.
What changed in FprHD 60364-7-711:2025/FprAA:2026 from the previous edition?
FprHD 60364-7-711:2025/FprAA:2026 is a draft amendment to FprHD 60364-7-711:2025. It is submitted for enquiry and is intended to modify that Harmonization Document if approved.
Which standards are used with FprHD 60364-7-711:2025/FprAA:2026?
Annex ZA names the publications that support the installation rules. They provide the cable, accessory, protection and equipment basis used alongside this part.
| Reference | What it contributes |
|---|---|
| IEC 60227 series | Polyvinyl chloride insulated cables up to 450/750 V |
| IEC 60245 series | Rubber insulated cables up to 450/750 V |
| IEC 60309-1 | General requirements for industrial plugs, socket-outlets and appliance inlets |
| IEC 60309-2 | Dimensional compatibility requirements for pin and contact-tube accessories |
| IEC 60332-1 series | Vertical flame propagation test for a single insulated wire or cable |
| IEC 60364-1 | Fundamental principles, general characteristics and definitions |
| IEC 60364-4-41 | Protection against electric shock |
| IEC 60364-5-51 | Common rules for selection and erection of electrical equipment |
| IEC 60364-5-52 | Wiring systems |
| IEC 60364-5-53 | Devices for protection, isolation, switching, control and monitoring |
| IEC 60364-5-55 | Other equipment |
| IEC 61347 series | Controlgear for electric light sources |
| IEC 61558 series | Safety of transformers, reactors, power supply units and combinations thereof |
What does the FprHD 60364-7-711:2025/FprAA:2026 document contain?
The document contains a European foreword, a normative annex for reference mapping, a normative annex for special national conditions, and an informative annex for A-deviations. The foreword also gives the CENELEC enquiry status and the proposed national implementation dates.
Annex ZA is a reference table linking international publications to their European counterparts. Annex ZB is the main practical appendix for national use because it lists country-by-country conditions against clause numbers. Annex ZC records the A-deviations that apply in relevant countries until the national situation changes.
Relations
- Effective Date
- 04-Feb-2025
Get Certified
Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.

IMQ S.p.A. (Certification)
Italian electrical product certification.
Sponsored listings
Frequently Asked Questions
FprHD 60364-7-711:2025/FprAA:2026 is a draft published by CLC. Its full title is "Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes". This standard covers: The particular requirements of this part of IEC 60364 apply to the temporary electrical installations of exhibitions, shows and stands (including mobile and portable displays and equipment).
The particular requirements of this part of IEC 60364 apply to the temporary electrical installations of exhibitions, shows and stands (including mobile and portable displays and equipment).
FprHD 60364-7-711:2025/FprAA:2026 is classified under the following ICS (International Classification for Standards) categories: 29.020 - Electrical engineering in general; 91.140.50 - Electricity supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
FprHD 60364-7-711:2025/FprAA:2026 has the following relationships with other standards: It is inter standard links to FprHD IEC 60364-7-711:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
FprHD 60364-7-711:2025/FprAA:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2026
Nizkonapetostne električne inštalacije - 7-711. del: Zahteve za posebne inštalacije
ali lokacije - Začasne električne inštalacije za razstave in razvedrilne namene -
Dopolnilo AA
Low-voltage electrical installations - Part 7-711: Requirements for special installations or
locations - Temporary electrical installations for exhibitions and entertainment related
purposes
Errichten von Niederspannungsanlagen - Teil 7-711: Anforderungen für Betriebsstätten,
Räume und Anlagen besonderer Art - Vorübergehend errichtete elektrische Anlagen für
Ausstellungen und Unterhaltungszwecke
Installations électriques à basse tension - Partie 7-711: Exigences pour les installations
ou emplacements spéciaux - Expositions, spectacles et stands
Ta slovenski standard je istoveten z: FprHD 60364-7-711:2025/prAA:2026
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
97.200.99 Druga oprema za razvedrilo Other equipment for
entertainment
kSIST FprHD 60364-7- en
711:2025/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
HARMONIZATION DOCUMENT DRAFT
FprHD IEC 60364-7-711:2025
DOCUMENT D'HARMONISATION
HARMONISIERUNGSDOKUMENT
prAA
February 2026
ICS 29.020; 91.140.50 -
English Version
Low-voltage electrical installations - Part 7-711: Requirements
for special installations or locations - Temporary electrical
installations for exhibitions and entertainment related purposes
Installations électriques à basse tension - Partie 7-711: Errichten von Niederspannungsanlagen - Teil 7-711:
Exigences pour les installations ou emplacements spéciaux Anforderungen für Betriebsstätten, Räume und Anlagen
- Installations électriques temporaires pour les expositions besonderer Art - Vorübergehend errichtete elektrische
et à des fins de divertissement Anlagen für Ausstellungen und Unterhaltungszwecke
This draft amendment prAA, if approved, will modify the Harmonization Document FprHD IEC 60364-7-711:2025; it is submitted to
CENELEC members for enquiry.
Deadline for CENELEC: 2026-05-22.
It has been drawn up by CLC/TC 64.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for implementation of this amendment on a national level.
This draft amendment, was established by CENELEC in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a Harmonization Document. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to as a Harmonization Document.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81340 Ref. No. FprHD 60364-7-711:2025/prAA:2026 E
FprHD 60364-7-711:2025/prAA:2026 (E)
Contents Page
1 European foreword . 3
2 Annex ZA (normative) Normative references to international publications with their
3 corresponding European publications . 4
4 Annex ZB (normative) Special national conditions. 6
5 Annex ZC (informative) A-deviations . 8
FprHD 60364-7-711:2025/prAA:2026 (E)
6 European foreword
7 This document (FprHD 60364-7-711:2025/prAA:2026) has been prepared by CLC/TC 64 "Electrical
8 installations and protection against electric shock".
9 This document is currently submitted to the Enquiry.
10 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
FprHD 60364-7-711:2025/prAA:2026 (E)
11 Annex ZA
12 (normative)
14 Normative references to international publications with their
15 corresponding European publications
Publication Year Title EN/HD Year
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V
IEC 60245 series Rubber insulated cables - Rated voltages up - -
to and including 450/750 V
IEC 60309-1 2021 Plugs, fixed or portable socket-outlets and EN IEC 60309-1 2022
appliance inlets for industrial purposes - Part
1: General requirements
IEC 60309-2 2021 Plugs, fixed or portable socket-outlets and EN IEC 60309-2 2022
appliance inlets for industrial purposes - Part
2: Dimensional compatibility requirements for
pin and contact-tube accessories
IEC 60332-1 series Tests on electric and optical fibre cables EN 60332-1 series
under fire conditions - Part 1: Test for vertical
flame propagation for a single insulated wire
or
...



