EN IEC 61587-1:2022

Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects

IEC 61587-1:2022 specifies environmental requirements, test set-ups, as well as safety aspects for empty enclosures, i.e. cabinets, racks, subracks, chassis, chassis integrated subracks and associated plug-in units under indoor condition use and transportation. It defines classifications (product performance levels) for these products, regarding and simulating the usually arising loads during their use. For mechanical static and dynamic load tests typical examples with dummy loads are used. The purpose of this document is to establish defined levels of physical performance in order to meet certain requirements of manufacture, storage, transport and final location conditions. This document applies in general only to the above cited mechanical structures. This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Modification of title. b) Revision of Clauses 6, 7 and 8 including new defined test setups. c) Compatibility with IEC 61587-2, IEC 61587-3 and IEC 61587-5.

Mechanische Bauweisen für elektrische und elektronische Einrichtungen – Prüfungen für die Reihen IEC 60917 und IEC 60297 – Teil 1: Umgebungsanforderungen, Prüfaufbau und Sicherheitsaspekte

Structures mécaniques pour les équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1: Exigences environnementales, montages d'essai et aspects liés à la sécurité

IEC 61587-1:2022 spécifie les exigences environnementales, les montages d’essai, ainsi que les aspects liés à la sécurité des enveloppes vides, c’est-à-dire des baies, bâtis, bacs à cartes, châssis, bacs à cartes intégrés au châssis et unités enfichables associées dans des conditions d’utilisation intérieure ou de transport. Elle définit les classifications (niveaux de performance des produits) pour ces produits, en considérant et simulant les charges habituellement générées pendant leur utilisation. Pour les essais de charge mécanique statique et dynamique, des exemples typiques avec des charges de simulation sont utilisés. L’objet du présent document est d’établir des niveaux définis de performances physiques afin de satisfaire à certaines exigences de fabrication, de stockage, de transport et de conditions d’emplacement final. Le présent document s’applique en général uniquement aux structures mécaniques citées ci-dessus. Cette cinquième édition annule et remplace la quatrième édition parue en 2016. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) modification du titre; b) révision des Articles 6, 7 et 8, qui incluent de nouveaux montages d’essai définis; c) compatibilité avec l’IEC 61587-2, l’IEC 61587-3 et l’IEC 61587-5.

Mehanske strukture za električno in elektronsko opremo - Preskušanje za seriji IEC 60917 in IEC 60297 - 1. del: Okoljevarstvene zahteve, preskusi in varnostni vidiki (IEC 61587-1:2022)

Ta del standarda IEC 61587 določa okoljevarstvene zahteve, preskuse in varnostne vidike za prazne okrove, tj. ohišja, stojala, okvire, ogrodja, ogrodja z vgrajenim okvirom in povezane vtične enote v notranjih pogojih uporabe oziroma transporta. Opredeljuje razvrstitve (ravni delovanja izdelkov) za te izdelke v zvezi z obremenitvami, ki običajno nastanejo med njihovo uporabo, ter s simuliranjem takšnih obremenitev. Za mehanske statične in dinamične preskuse obremenitve so uporabljeni običajni primeri z navideznimi obtežbami. Namen tega dokumenta je vzpostaviti opredeljene ravni fizičnega delovanja za izpolnjevanje določenih zahtev v zvezi s pogoji proizvodnje, shranjevanja, transporta in končne lokacije. Ta dokument se na splošno uporablja samo za zgoraj navedene mehanske strukture.

General Information

• Status: Published
• Publication Date: 17-Feb-2022
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Feb-2022
• Completion Date: 18-Feb-2022
• Ref Project: SIST EN IEC 61587-1:2022 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects (IEC 61587-1:2022)

Relations

• Replaces: EN 61587-1:2017 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61587-1:2022
01-april-2022
Nadomešča:
SIST EN 61587-1:2017
Mehanske strukture za električno in elektronsko opremo - Preskušanje za seriji
IEC 60917 in IEC 60297 - 1. del: Okoljevarstvene zahteve, preskusi in varnostni
vidiki (IEC 61587-1:2022)
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and
IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects
(IEC 61587-1:2022)
Mechanische Bauweisen für elektrische und elektronische Einrichtungen – Prüfungen
für die Reihen IEC 60917 und IEC 60297 – Teil 1: Umgebungsanforderungen,
Prüfaufbau und Sicherheitsaspekte (IEC 61587-1:2022)
Structures mécaniques pour les équipements électriques et électroniques - Essais pour
les séries IEC 60917 et IEC 60297 - Partie 1: Exigences environnementales, montages
d'essai et aspects liés à la sécurité (IEC 61587-1:2022)
Ta slovenski standard je istoveten z: EN IEC 61587-1:2022
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN IEC 61587-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61587-1:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61587-1:2022


EUROPEAN STANDARD EN IEC 61587-1

NORME EUROPÉENNE

EUROPÄISCHE NORM February 2022
ICS 31.240 Supersedes EN 61587-1:2017 and all of its amendments
and corrigenda (if any)
English Version
Mechanical structures for electrical and electronic equipment -
Tests for IEC 60917 and IEC 60297 series - Part 1:
Environmental requirements, test setups and safety aspects
(IEC 61587-1:2022)
Structures mécaniques pour les équipements électriques et Mechanische Bauweisen für elektrische und elektronische
électroniques - Essais pour les séries IEC 60917 et IEC Einrichtungen - Prüfungen für die Reihen IEC 60917 und
60297 - Partie 1: Exigences environnementales, montages IEC 60297 - Teil 1: Umgebungsanforderungen, Prüfaufbau
d'essai et aspects liés à la sécurité und Sicherheitsaspekte
(IEC 61587-1:2022) (IEC 61587-1:2022)
This European Standard was approved by CENELEC on 2022-02-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61587-1:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61587-1:2022
EN IEC 61587-1:2022 (E)
European foreword
The text of document 48D/743/FDIS, future edition 5 of IEC 61587-1, prepared by SC 48D
"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors
and mechanical structures for electrical and electronic equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61587-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-11-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-02-11
document have to be withdrawn

This document supersedes EN 61587-1:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these
...