EN 61587-1:2017

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation

IEC 61587-1:2016: specifies environmental requirements, test set-up, as well as safety aspects for empty enclosures, i.e., cabinets, racks, subracks, chassis with an integrated subrack, and associated plug-in units under indoor condition use and transportation. The purpose of this standard is to establish defined levels of physical performance in order to meet certain requirements of storage, transport and final location conditions. It applies in whole or part only to the mechanical structures of cabinets, racks, subracks, chassis with an integrated subrack, and associated plug-in units, but it does not apply to electronic equipment. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: total overhaul of Clause 7 "Mechanical tests" and compatibility with IEC 61587-5. Key words: Indoor use, Transportation Requirements, Cabinets, Racks, Chassis Racks

Mechanische Bauweisen für elektronische Einrichtungen – Prüfungen für die Reihen IEC 60917 und IEC 60297 - Teil 1: Umgebungsanforderungen, Prüfaufbau und Sicherheitsaspekte für Schränke, Gestelle, Baugruppenträger und Einschübe bei Bedingungen in Innenräumen und beim Transport

Structures mécaniques pour équipement électronique - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1: Exigences environnementales, montage d’essai et aspects liés à la sécurité des baies, bâtis, bacs à cartes et châssis dans des conditions d’utilisation intérieure ou de transport

L'IEC 61587-1:2016 spécifie les exigences environnementales, le montage d'essai, ainsi que les aspects liés à la sécurité des enveloppes vides, c'est-à-dire des baies, bâtis, bacs à cartes, châssis avec un bac à cartes intégré et unités enfichables associées dans des conditions d'utilisation intérieure ou de transport. L'objet de la présente norme est d'établir des niveaux définis de performances physiques, afin de satisfaire à certaines exigences de stockage, de transport et de conditions d'emplacement final. Elle ne s'applique totalement ou partiellement qu'aux structures mécaniques des baies, bâtis, bacs à cartes, châssis avec un bac à cartes intégré et unités enfichables associées, mais elle ne s'applique pas aux équipements électroniques. Cette quatrième édition annule et remplace la troisième édition parue en 2011 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: Révision complète de l'Article 7 "Essais mécaniques" ; Compatibilité avec l'IEC 61587-5. Mots clés: utilisation intérieure, exigences de transport, baies, bâtis, châssis

Mehanske strukture za električno in elektronsko opremo - Preskušanje za seriji IEC 60917 in IEC 60297 - 1. del: Okoljevarstvene zahteve in preskusi, varnostni vidiki za ohišja, stojala, okvire in ogrodja v notranjih pogojih (IEC 61587-1:2016)

Ta del standarda IEC 61587 določa okoljevarstvene zahteve, preskuse ter varnostne vidike za prazne okrove, tj. ohišja, stojala, okvire, ogrodja z vgrajenim okvirom, in povezane vtične enote v notranjih pogojih uporabe in transporta.
Namen tega standarda je vzpostaviti opredeljene ravni fizičnega delovanja za izpolnjevanje določenih zahtev v zvezi s pogoji shranjevanja, transporta in končne lokacije. V celoti ali v delih se uporablja le za mehanske strukture ohišij, stojal, okvirov, ogrodij z vgrajenim okvirom in povezane vtične enote, vendar se ne uporablja za elektronsko opremo.

General Information

• Status: Published
• Publication Date: 20-Apr-2017
• Withdrawal Date: 20-Apr-2020
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Apr-2017
• Completion Date: 21-Apr-2017
• Ref Project: SIST EN 61587-1:2017 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks,subracks and chassis under indoor conditions (IEC 61587-1:2016)

Relations

• Replaces: EN 61587-1:2012 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
• Effective Date: 23-Jan-2023
• Replaced By: EN IEC 61587-1:2022 - Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61587-1:2017
01-junij-2017
1DGRPHãþD
SIST EN 61587-1:2012
0HKDQVNHVWUXNWXUH]DHOHNWULþQRLQHOHNWURQVNRRSUHPR3UHVNXãDQMH]DVHULML
,(&LQ,(&GHO2NROMHYDUVWYHQH]DKWHYHLQSUHVNXVLYDUQRVWQL
YLGLNL]DRKLãMDVWRMDODRNYLUHLQRJURGMDYQRWUDQMLKSRJRMLK,(&
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and
IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects
for cabinets, racks,subracks and chassis under indoor conditions (IEC 61587-1:2016)
Mechanische Bauweisen für elektronische Einrichtungen – Prüfungen für IEC 60917 und
IEC 60297 – Teil 1: Umgebungsanforderungen, Prüfaufbau und Sicherheitsaspekte für
Schränke, Gestelle, Baugruppenträger und Einschübe bei Bedingungen in Innenräumen
(IEC 61587-1:2016)
Structures mécaniques pour équipement électronique - Essais pour les séries CEI 60917
et CEI 60297 - Partie 1: Exigences environnementales, montage d’essai et aspects de la
sécurité des baies, bâtis, bacs à cartes et châssis dans des conditions d’intérieur (IEC
61587-1:2016)
Ta slovenski standard je istoveten z: EN 61587-1:2017
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 61587-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61587-1:2017

---------------------- Page: 2 ----------------------

SIST EN 61587-1:2017


EUROPEAN STANDARD EN 61587-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2017
ICS 31.240 Supersedes EN 61587-1:2012
English Version
Mechanical structures for electronic equipment - Tests for IEC
60917 and IEC 60297 series - Part 1: Environmental
requirements, test set-up and safety aspects for cabinets, racks,
subracks and chassis under indoor condition use and
transportation
(IEC 61587-1:2016)
Structures mécaniques pour équipement électronique - Mechanische Bauweisen für elektronische Einrichtungen -
Essais pour les séries IEC 60917 et IEC 60297 - Partie 1: Prüfungen für die Reihen IEC 60917 und IEC 60297 - Teil
Exigences environnementales, montage d'essai et aspects 1: Umgebungsanforderungen, Prüfaufbau und
liés à la sécurité des baies, bâtis, bacs à cartes et châssis Sicherheitsaspekte für Schränke, Gestelle,
dans des conditions d'utilisation intérieure ou de transport Baugruppenträger und Einschübe bei Bedingungen in
(IEC 61587-1:2016) Innenräumen und beim Transport
(IEC 61587-1:2016)
This European Standard was approved by CENELEC on 2017-01-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61587-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61587-1:2017
EN 61587-1:2017
European foreword
The text of document 48D/623/FDIS, future edition 4 of IEC 61587-1, prepared by
SC 48D “Mechanical structures for electrical and electronic equipment” of IEC/TC 48 “Electrical
connectors and mechanical structures for electrical and electronic equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61587-1:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2017-10-21
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-04-21
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN
...