EN 50164-2:2002/A1:2006

Lightning protection components (LPC) - Part 2: Requirements for conductors and earth electrodes

Superseded by EN 50164-2:2008

Blitzschutzbauteile - Teil 2: Anforderungen an Leitungen und Erder

Composants de protection contre la foudre (CPF) - Partie 2: Caractéristiques des conducteurs et des électrodes de terre

Elementi za zaščito pred strelo (LPC) - 2. del: Zahteve za vodnike in ozemljitvene elektrode

General Information

• Status: Withdrawn
• Publication Date: 24-Aug-2006
• Withdrawal Date: 28-Feb-2009
• ICS: 91.120.40 - Lightning protection
• Technical Committee: CLC/TC 81X - Lightning protection
• Drafting Committee: IEC/TC 81 - IEC_TC_81
• Parallel Committee: IEC/TC 81 - IEC_TC_81
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Ref Project: SIST EN 50164-2:2002/A1:2006 - Lightning protection components (LPC) -- Part 2: Requirements for conductors and earth electrodes

Relations

• Replaced By: EN 50164-2:2008 - Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 29-Jan-2023
• Amends: EN 50164-2:2002 - Lightning protection components (LPC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 29-Jan-2023

Standards Content (Sample)

6/29(16., 6,67(1$

67$1'$5'
GHFHPEHU
(OHPHQWL]D]DãþLWRSUHGVWUHOR/3&GHO=DKWHYH]DYRGQLNHLQ
R]HPOMLWYHQHHOHNWURGH
/LJKWQLQJSURWHFWLRQFRPSRQHQWV/3&3DUW5HTXLUHPHQWVIRUFRQGXFWRUVDQG
HDUWKHOHFWURGHV
,&6 5HIHUHQþQDãWHYLOND

6,67(1$HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 50164-2/A1

NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM

ICS 91.120.40


English version


Lightning protection components (LPC)
Part 2: Requirements for conductors and earth electrodes



Composants de protection  Blitzschutzbauteile
contre la foudre (CPF) Teil 2: Anforderungen an Leitungen
Partie 2: Caractéristiques des und Erder
conducteurs et des électrodes de terre





This amendment A1 modifies the European Standard EN 50164-2:2002; it was approved by CENELEC on
2006-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50164-2:2002/A1:2006 E

---------------------- Page: 2 ----------------------

EN 50164-2:2002/A1:2006 - 2 -
Foreword

This amendment was prepared by the Technical Committee CENELEC TC 81X, Lightning
protection.
The text of the draft was submitted to the formal vote and was approved by CENELEC as
amendment A1 to EN 50164-2:2002 on 2006-03-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2007-03-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2009-03-01
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50164-2:2002/A1:2006
2 Normative references

Add:

EN ISO 1460 1994 Metallic coatings - Hot dip galvanized coatings on ferrous materials -
Gravimetric determination of the mass per unit
...