EN 62317-1:2007
(Main)Ferrite cores - Dimensions - Part 1: General specification
Ferrite cores - Dimensions - Part 1: General specification
Specifies existing standards and lists current projects dealing with dimensions of ferrite cores. The series of standards IEC 62317 is intended to include ferrite cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry.
Ferritkerne - Maße - Teil 1: Allgemeine Festlegungen
Noyaux en ferrite - Dimensions - Partie 1: Spécifications générales
La CEI 62317-1:2007 spécifie les normes et les projets existants traitant des dimensions de noyaux ferrites. Il est prévu que la présente norme inclura des noyaux ferrites largement utilisés et référencés dans l'industrie, soit parce qu'ils sont inclus dans des normes nationales, soit parce qu'ils sont utilisés à grande échelle dans l'industrie. Lorsque cela est applicable, il convient que le nom industriel existant pour chaque composant normalisé apparaisse avec le composant dans cette série.
Feritna jedra – Mere – Splošne specifikacije (IEC 62317-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2007
Feritna jedra – Mere – Splošne specifikacije (IEC 62317-1:2007)
Ferrite cores - Dimensions -- Part 1: General specification (IEC 62317-1:2007)
Ferritkerne - Maße - Teil 1: Allgemeine Festlegungen (IEC 62317-1:2007)
Noyaux en ferrite - Dimensions - Partie 1: Spécifications générales (IEC 62317-1:2007)
Ta slovenski standard je istoveten z: EN 62317-1:2007
ICS:
29.100.10 Magnetne komponente Magnetic components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62317-1
NORME EUROPÉENNE
August 2007
EUROPÄISCHE NORM
ICS 29.100.10
English version
Ferrite cores -
Dimensions -
Part 1: General specification
(IEC 62317-1:2007)
Noyaux en ferrite - Ferritkerne -
Dimensions - Maße -
Partie 1: Spécifications générales Teil 1: Allgemeine Festlegungen
(CEI 62317-1:2007) (IEC 62317-1:2007)
This European Standard was approved by CENELEC on 2007-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62317-1:2007 E
Foreword
The text of document 51/874/CDV, future edition 1 of IEC 62317-1, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC Parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 62317-1 on 2007-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62317-1:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62317-1:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60133 - Dimensions of pot-cores made of magnetic EN 60133 2001
oxides and associated parts
1)
IEC 60647 - Dimensions for magnetic oxide cores - -
intended for use in power supplies (EC-cores)
1) 2)
IEC 61185 - Ferrite cores (ETD-cores) intended for use EN 61185 2005
in power supply applications - Dimensions
1) 2)
IEC 61247 - PM-cores made of magnetic oxides and EN 61247 1997
associated parts - Dimensions
1) 2)
IEC 61596 - Magnetic oxide EP-cores and associated EN 61596 1997
parts for use in inductors and transformers -
Dimensions
1) 2)
IEC 62317-4 - Ferrite cores - Dimensions - EN 62317-4 2005
Part 4: RM-cores and associated parts
1) 2)
IEC 62317-7 - Ferrite cores - Dimensions - EN 62317-7 2005
Part 7: EER-cores
1) 2)
IEC 62317-8 - Ferrite cores - Dimensions - EN 62317-8 2006
Part 8: E-cores
1) 2)
IEC 62317-9 - Ferrite cores - Dimensions - EN 62317-9 2006
Part 9: Planar cores
1) 2)
IEC 62323 - Dimensions of half pot-cores made of ferrite EN 62323 2005
for inductive proximity switches
1)
IEC/TR 61604 - Dimensions of uncoated ring cores of - -
magnetic oxides
1)
Undated reference.
2)
Valid edition at date of issue.
INTERNATIONAL IEC
STANDARD 62317-1
First edition
2007-07
Ferrite cores –
Dimensions –
Part 1:
General specification
PRICE CODE
Commission Electrotechnique Internationale H
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 62317-1 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FERRITE CORES –
DIMENSIONS –
Part 1: General specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards. Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62317-1 has been prepared IEC technical committee 51: Magnetic
components and ferrite materials.
The text of this standard is based on the following documents:
CDV Report on voting
51/874/CDV 51/890/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 62317 series, published under the general title Ferrite cores –
Dimensions, can be found on the IEC website.
62317-1 © IEC:2007(E) – 3 –
The committee has de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.