Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

IEC 60512-16-5:2008 details a standard test method to determine the holding capacity of contacts with resilient features by means of gauges.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-5: Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16e: Einzelziehkraft mit Lehre

Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-5: Essais mécaniques des contacts et des sorties - Essai 16e: Force de rétention du calibre (contacts élastiques)

La CEI 60512-16-5:2008 détaille une méthode d'essai normalisée pour déterminer la force de maintien des contacts avec des caractéristiques élastiques au moyen de calibres.

Konektorji za elektronsko opremo - Preskusi in meritve - 16-5. del: Mehanski preskusi na kontaktih in priključkih - Preskus 16e: Zadrževalna sila kalibra (elastični kontakti) (IEC 60512-16-5:2008)

General Information

Status
Published
Publication Date
18-Sep-2008
Withdrawal Date
31-Jul-2011
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
19-Sep-2008
Completion Date
19-Sep-2008

Buy Standard

Standard
EN 60512-16-5:2008
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2008
.RQHNWRUML]DHOHNWURQVNRRSUHPR3UHVNXVLLQPHULWYHGHO0HKDQVNL
SUHVNXVLQDNRQWDNWLKLQSULNOMXþNLK3UHVNXVH=DGUåHYDOQDVLODNDOLEUD
HODVWLþQLNRQWDNWL  ,(&
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical
tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
(IEC 60512-16-5:2008)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 16-5:
Mechanische Prüfungen an Kontakten und Anschlüssen - Prüfung 16e: Einzelziehkraft
mit Lehre (IEC 60512-16-5:2008)
Connecteurs pour équipements électroniques - Essais et mesures +- Partie 16-5: Essais
mécaniques des contacts et des sorties - Essai 16e: Force de rétention du calibre
(contacts élastiques) (CEI 60512-16-5:2008)
Ta slovenski standard je istoveten z: EN 60512-16-5:2008
ICS:
19.060 Mehansko preskušanje Mechanical testing
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60512-16-5
NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Tests and measurements -
Part 16-5: Mechanical tests on contacts and terminations -
Test 16e: Gauge retention force (resilient contacts)
(IEC 60512-16-5:2008)
Connecteurs  Steckverbinder
pour équipements électroniques - für elektronische Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 16-5: Essais mécaniques Teil 16-5: Mechanische Prüfungen
des contacts et des sorties - an Kontakten und Anschlüssen -
Essai 16e: Force de rétention du calibre Prüfung 16e: Einzelziehkraft mit Lehre
(contacts élastiques) (IEC 60512-16-5:2008)
(CEI 60512-16-5:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-16-5:2008 E
Foreword
The text of document 48B/1886/FDIS, future edition 1 of IEC 60512-16-5, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-16-5 on 2008-08-01.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-05-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-08-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-16-5:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60512-16-5:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 2002
and measurements -
Part 1-1: General examination - Test 1a:
Visual examination
1) 2)
ISO 1302 - Geometrical Product Specifications (GPS) - EN ISO 1302 2002
Indication of surface texture in technical
product documentation
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 60512-16-5
Edition 1.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –
Part 16-5: Mechanical tests on contacts and terminations – Test 16e: Gauge
retention force (resilient contacts)

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 16-5: Essais mécaniques des contacts et des sorties – Essai 16e: Force
de rétention du calibre (contacts élastiques)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 31.220.10 ISBN 2-8318-9880-3
– 2 – 60512-16-5 © IEC:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 16-5: Mechanical tests on contacts and terminations –
Test 16e: Gauge retention force (resilient contacts)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparator
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.