HD 630.2.1 S4:2000

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses with fuse-links having ""gD"" and ""gN"" characteristics. NOTE - The following fuse systems are standardized systems in respect to their safety aspects. The National Committees may select from the examples of standardized fuses one or more systems for their own standards.

Niederspannungssicherungen (NH-System) - Teil 2-1: Zusätzliche Anforderungen an Sicherungen zum Gebrauch durch Elektrofachkräfte bzw. elektrotechnisch unterwiesene Personen (Sicherungen überwiegend für den industriellen Gebrauch) - Hauptabschnitte I bis V: Beispiele von genormten Sicherungstypen

Fusibles basse tension - Partie 2-1: Règles supplémentaires pour les fusibles destinés à être utilisés par des personnes habilitées (fusibles pour usages essentiellement industriels) - Sections I à V: Exemples de fusibles normalisés

La présente norme est divisée en cinq sections traitant chacune d'un exemple spécifique de fusible normalisé destiné à être utilisé par des personnes habilitées: Section I: Fusibles avec éléments de remplacement à couteaux. Section II: Fusibles avec éléments de remplacement à platines. Section III: Fusibles avec éléments de remplacement à capsules cylindriques. Section IV: Fusibles avec éléments de remplacement à couteaux déportés. Section V: Fusibles dont les éléments de remplacement ont des caractéristiques ""gD"" et ""gN"". NOTE - Les systèmes de fusibles suivants sont normalisés en ce qui concerne les aspects de sécurité. Les Comités nationaux peuvent choisir, parmi les exemples de fusibles normalisés, un ou plusieurs systèmes pour leurs normes nationales.

Nizkonapetostne varovalke – 2-1. del: Dodatne zahteve za varovalke, ki jih uporabljajo pooblaščene osebe (uporaba varovalk zlasti v industriji) – Oddelki I do V: Primeri tipov standardiziranih varovalk (IEC 60269-2-1:1998, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 21-Dec-2000
• ICS: 29.120.50 - Fuses and other overcurrent protection devices
• Technical Committee: CLC/SR 32B - Low-voltage fuses
• Drafting Committee: IEC/SC 32B - IEC_SC_32B
• Parallel Committee: IEC/SC 32B - IEC_SC_32B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2005
• Completion Date: 01-May-2005
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST HD 630.2.1 S4:2005 - Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) -- Sections I to V: Examples of types of standardized fuses

Relations

• Replaces: HD 630.2.1 S3:1998 - Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses for use by authorized persons
• Effective Date: 29-Jan-2023
• Replaced By: HD 630.2.1 S5:2002 - Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses
• Effective Date: 29-Jan-2023