Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements

IEC 61158-3-12:2019 defines the services provided to the Type 12 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This fourth edition cancels and replaces the third edition published in 2014. It constitutes a technical revision. The main changes are: - Technical corrections in the communication services - Editorial improvements for clarification.

Industrielle Kommunikationsnetze - Feldbusse - Teil 3-12: Dienstfestlegungen des Data-Link Layer (Sicherungsschicht) - Typ 12-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-12: Définition des services de la couche liaison de données - Éléments de type 12

L’IEC 61158-3-12:2019 fournit les éléments communs pour les communications de messagerie de base à temps critique entre des appareils dans un environnement d’automation. Le terme "à temps critique" sert à représenter la présence d'une fenêtre temporelle, dans les limites de laquelle une ou plusieurs actions spécifiées sont tenues d'être parachevées avec un certain niveau défini de certitude. Le manquement à parachever les actions spécifiées dans les limites de la fenêtre temporelle risque d'entraîner la défaillance des applications qui demandent ces actions, avec le risque concomitant pour l'équipement, l'installation et éventuellement pour la vie humaine. La présente Norme internationale définit de manière abstraite le service visible de l'extérieur fourni par la couche liaison de données de réseau de terrain type 12 en termes: a) des actions et événements primitifs du service; b) des paramètres associés à chaque action primitive et événement primitif, et la forme qu'ils prennent; c) de l'interrelation entre ces actions et événements, et leurs séquences valides.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-12. del: Definicija opravil na ravni podatkovnih povezav - Elementi tipa 12 (IEC 61158-3-12:2019)

Ta dokument določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta mednarodni standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja nivo podatkovnih povezav procesnih vodil tipa 12 v zvezi s/z: a) primitivnimi dejanji in dogodki opravila; b) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; c) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega dokumenta je opredeliti opravila, ki se zagotavljajo za: – aplikacijski nivo procesnih vodil tipa 12 na meji med aplikacijskim nivojem in nivojem podatkovnih povezav referenčnega modela procesnih vodil; vodenje sistemov na meji med nivojem podatkovnih povezav in vodenje sistemov referenčnega modela procesnih vodil.

General Information

Status
Published
Publication Date
20-Jun-2019
Withdrawal Date
28-May-2022
Current Stage
6060 - Document made available - Publishing
Start Date
21-Jun-2019
Completion Date
21-Jun-2019

Relations

Buy Standard

Standard
EN IEC 61158-3-12:2019
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 61158-3-12:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-12. del:
Definicija opravil na ravni podatkovnih povezav - Elementi tipa 12 (IEC 61158-3-
12:2019)
Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer
service definition - Type 12 elements (IEC 61158-3-12:2019)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-12: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 12-Elemente (IEC 61158-3-12:2019)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-12:
Définition des services de la couche liaison de données - Éléments de type 12 (IEC
61158-3-12:2019)
Ta slovenski standard je istoveten z: EN IEC 61158-3-12:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61158-3-12

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-12:2014
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-12: Data-link layer service definition - Type 12 elements
(IEC 61158-3-12:2019)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-12:
bus de terrain - Partie 3-12: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Éléments de type 12 (Sicherungsschicht) - Typ 12-Elemente
(IEC 61158-3-12:2019) (IEC 61158-3-12:2019)
This European Standard was approved by CENELEC on 2019-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61158-3-12:2019 E

European foreword
The text of document 65C/945/FDIS, future edition 4 of IEC 61158-3-12, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-3-
12:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-29
document have to be withdrawn
This document supersedes EN 61158-3-12:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61158-3-12:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61158-1 NOTE Harmonized as EN 61158-1
IEC 61158-2:2014 NOTE Harmonized as EN 61158-2:2014 (not modified)
IEC 61158-4-12 NOTE Harmonized as EN 61158-4-12
IEC 61158-5-12 NOTE Harmonized as EN 61158-5-12
IEC 61784-1 NOTE Harmonized as EN 61784-1
IEC 61784-2 NOTE Harmonized as EN 61784-2

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 -  Information technology - Open Systems - -
Interconnection - Basic reference model:
The basic model
ISO/IEC 7498-3 -  Information technology - Open Systems - -
Interconnection - Basic reference model:
Naming and addressing
ISO/IEC 10731 -  Information technology - Open Systems- -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO/IEC/IEEE 8802--  Information technology – - -
3 Telecommunications and information
exchange between systems – Local and
metropolitan area networks – Specific
requirements – Part 3: Standard for Ethernet
IEEE Std 802.1D -  IEEE Standard for Local and metropolitan - -
area networks – Media Access Control
(MAC) Bridges
IEC 61158-3-12 ®
Edition 4.0 2019-04
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –

Part 3-12: Data-link layer service definition – Type 12 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-6788-2

– 2 – IEC 61158-3-12:2019 © IEC 2019
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 9
3 Terms, definitions, symbols, abbreviations and conventions . 9
3.1 Reference model terms and definitions . 9
3.2 Service convention terms and definitions . 10
3.3 Data-link service terms and definitions . 11
3.4 Symbols and abbreviations . 14
3.5 Common conventions . 16
4 Data-link layer services and concepts . 17
4.1 Operating principle . 17
4.2 Topology . 17
4.3 Data-link layer overview . 18
4.4 Error detection overview . 19
4.5 Parameter and process data handling introduction . 19
4.6 Node reference model . 19
4.6.1 Mapping onto OSI Basic Reference Model . 19
4.6.2 Data-link layer features . 20
4.7 Operation overview . 20
4.7.1 Relation to ISO/IEC/IEEE 8802-3 . 20
4.7.2 Type 12 modes . 20
4.7.3 Logical topology . 21
4.8 Addressing . 22
4.8.1 Addressing overview . 22
4.8.2 Segment addressing . 22
4.8.3 Device addressing . 22
4.8.4 Logical addressing . 23
4.8.5 FMMU introduction . 23
4.8.6 Sync manager introduction . 24
4.9 Slave classification . 24
4.9.1 Full slave . 24
4.9.2 Basic slave . 24
4.10 Structure of the communication layer in the slave . 24
5 Communication services . 26
5.1 Overview. 26
5.2 Read services . 26
5.2.1 Overview . 26
5.2.2 Positional physical read (APRD) . 26
5.2.3 Configured-address physical read (FPRD) . 27
5.2.4 Broadcast read (BRD) . 28
5.2.5 Logical read (LRD) . 28
5.3 Write services . 29

IEC 61158-3-12:2019 © IEC 2019 – 3 –
5.3.1 Overview . 29
5.3.2 Positional physical write (APWR) . 29
5.3.3 Configured-address physical write (FPWR) . 30
5.3.4 Broadcast write (BWR) . 30
5.3.5 Logical write (LWR) . 31
5.4 Combined read/write services . 32
5.4.1 Overview . 32
5.4.2 Positional physical read/write (APRW) . 32
5.4.3 Configured-address physical read/write (FPRW) . 32
5.4.4 Broadcast read/write (BRW) . 33
5.4.5 Logical read/write (LRW) . 34
5.4.6 Positional physical read / multiple write (ARMW) . 34
5.4.7 Configured-address physical read / multiple write (FRMW) . 35
5.5 Network services . 35
5.5.1 Overview .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.