EN 61784-1:2014
(Main)Industrial communication networks - Profiles - Part 1: Fieldbus profiles
Industrial communication networks - Profiles - Part 1: Fieldbus profiles
IEC 61784-1:2014 defines a set of protocol specific communication profiles based primarily on the IEC 61158 series, to be used in the design of devices involved in communications in factory manufacturing and process control. This fourth edition cancels and replaces the third edition published in 2010 it constitutes a technical revision. The main changes are: - update of the dated references to the IEC 61158 series, to IEC 61784-2, to the IEC 61784-3 series, to the IEC 61784-5 series and to IEC 61918 throughout the document; - new profile family CPF 19; - update of selection tables for CPF 1 and CPF 9.
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile
Réseaux de communication industriels - Profils - Partie 1: Profils de bus de terrain
L'IEC 61784-1:2014 définit un jeu de profils de communication spécifiques au protocole, principalement fondé sur la série de normes IEC 61158, à utiliser pour la conception d'appareils employés en communication dans le cadre du contrôle de la fabrication et du processus en usine. Cette quatrième édition annule et remplace la troisième édition parue en 2010. Cette édition constitue une révision technique. Par rapport à l'édition précédente, les changements majeurs sont les suivants: - la mise à jour des références datées à la série IEC 61158, à l'IEC 61784-2, à la série IEC 61784-3, à la série IEC 61784-5 et à l'IEC 61918 dans l'ensemble du document; - une nouvelle famille de profils CPF 19; - la mise à jour des tableaux de sélection pour CPF 1 et CPF 9.
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC 61784-1:2014)
Ta del standarda IEC 61784 določa sklop komunikacijskih profilov, specifičnih za protokol, predvsem na osnovi serije IEC 61158, za uporabo pri oblikovanju naprav, ki sodelujejo v komunikacijah v tovarniški proizvodnji in kontroli procesa.
Vsak profil izbere specifikacije za sklad komunikacijskega protokola na napravi. Vsebuje minimalen sklop zahtevanih opravil na aplikacijskem nivoju in specifikacijo možnosti na vmesnih nivojih, opredeljeno z napotili. Če ni vključen noben aplikacijski nivo, potem se določi minimalen sklop zahtevanih opravil na ravni podatkovnih povezav. Ustrezni sklici na posebne tipe protokola so podani v vsaki družini komunikacijskega profila ali pridruženih profilov.
OPOMBA Vsi profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavil IEC ali vsak profil izbere ustrezno podskupino skladnih in združljivih opravil ter
protokolov iz vseh razpoložljivih sklopov, ki so določeni in oblikovani v standardu IEC 61158. Za izbrane podskupine opravil in protokolov profil opisuje tudi morebitne potrebne ali nujne omejitve vrednosti parametrov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2014)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-
1:2014)
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile (IEC 61784-1:2014)
Réseaux de communication industriels - Profils - Partie 1: Profils de bus de terrain (CEI
61784-1:2014)
Ta slovenski standard je istoveten z: EN 61784-1:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61784-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 35.100.20; 35.240.50 Supersedes EN 61784-1:2010
English Version
Industrial communication networks - Profiles - Part 1: Fieldbus
profiles
(IEC 61784-1:2014)
Réseaux de communication industriels - Profils - Partie 1: Industrielle Kommunikationsnetze - Profile - Teil 1:
Profils de bus de terrain Feldbusprofile
(CEI 61784-1:2014) (IEC 61784-1:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61784-1:2014 E
Foreword
The text of document 65C/760/FDIS, future edition 4 of IEC 61784-1, prepared by IEC/TC 65C
"Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and
automation was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-09-23
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61784-1:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61784-1:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60079-14 NOTE Harmonised as EN 60079-14.
IEC 60793 (Series) NOTE Harmonised as EN 60793 (Series).
IEC 61131-3 NOTE Harmonised as EN 61131-3.
IEC 61158-1 NOTE Harmonised as EN 61158-1.
IEC 61800-7-204 NOTE Harmonised as EN 61800-7-204.
ISO/IEC 7498-3 NOTE Harmonised as EN ISO/IEC 7498-1.
- 3 - EN 61784-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60079-11 - Explosive atmospheres -- Part 11: EN 60079-11 -
Equipment protection by intrinsic safety "i"
IEC 60079-25 - Explosive atmospheres -- Part 25: EN 60079-25 -
Intrinsically safe electrical systems
+AC 2013
IEC 61010 series Safety requirements for electrical - series
equipment for measurement, control and
laboratory use
IEC 61131-2 - Programmable controllers -- Part 2: EN 61131-2 -
Equipment requirements and tests
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications
IEC 61158-2 2014 Industrial communication networks - EN 61158-2 2014
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-1 2014 Industrial communication networks - EN 61158-3-1 2014
Fieldbus specifications - Part 3-1: Data-link
layer service definition - Type 1 elements
IEC 61158-3-2 2014 Industrial communication networks - EN 61158-3-2 2014
Fieldbus specifications - Part 3-2: Data-link
layer service definition - Type 2 elements
IEC 61158-3-3 2014 Industrial communication networks - EN 61158-3-3 2014
Fieldbus specifications - Part 3-3: Data-link
layer service definition - Type 3 elements
IEC 61158-3-4 2014 Industrial communication networks - EN 61158-3-4 2014
Fieldbus specifications - Part 3-4: Data-link
layer service definition - Type 4 elements
IEC 61158-3-7 2007 Industrial communication networks - EN 61158-3-7 2008
Fieldbus specifications - Part 3-7: Data-link
layer service definition - Type 7 elements
IEC 61158-3-8 2007 Industrial communication networks - EN 61158-3-8 2008
Fieldbus specifications - Part 3-8: Data-link
layer service definition - Type 8 elements
IEC 61158-3-16 2007 Industrial communication networks - EN 61158-3-16 2008
Fieldbus specifications - Part 3-16: Data-
link layer service definition - Type 16
elements
IEC 61158-3-18 2007 Industrial communication networks - EN 61158-3-18 2008
Fieldbus specifications - Part 3-18: Data-
link layer service definition - Type 18
elements
IEC 61158-3-19 2014 Industrial communication networks - EN 61158-3-19 2014
Fieldbus specifications - Part 3-19: Data-
link layer service definition - Type 19
elements
IEC 61158-3-20 2014 Industrial communication networks - EN 61158-3-20 2014
Fieldbus specifications - Part 3-20: Data-
link layer service definition - Type 20
elements
IEC 61158-3-24 2014 Industrial communication networks - EN 61158-3-24 2014
Fieldbus specifications - Part 3-24: Data-
link layer service definition - Type-24
elements
IEC 61158-4-1 2014 Industrial communication networks - EN 61158-4-1 2014
Fieldbus specifications - Part 4-1: Data-link
layer protocol specification - Type 1
elements
IEC 61158-4-2 2014 Industrial communication networks - EN 61158-4-2 2014
Fieldbus specifications - Part 4-2: Data-link
layer protocol specification - Type 2
elements
IEC 61158-4-3 2014 Industrial communication networks - EN 61158-4-3 2014
Fieldbus specifications - Part 4-3: Data-link
layer protocol specification - Type 3
elements
IEC 61158-4-4 2014 Industrial communication networks - EN 61158-4-4 2014
Fieldbus specifications - Part 4-4: Data-link
layer protocol specification - Type 4
elements
IEC 61158-4-7 2007 Industrial communication networks - EN 61158-4-7 2008
Fieldbus specifications - Part 4-7: Data-link
layer protocol specification - Type 7
elements
IEC 61158-4-8 2007 Industrial communication networks - EN 61158-4-8 2008
Fieldbus specifications - Part 4-8: Data-link
layer protocol specification - Type 8
elements
IEC 61158-4-16 2007 Industrial communication networks - EN 61158-4-16 2008
Fieldbus specifications - Part 4-16: Data-
link layer protocol specification - Type 16
elements
IEC 61158-4-16 2007 Industrial communication networks - EN 61158-4-16 2008
Fieldbus specifications - Part 4-16: Data-
link layer protocol specification - Type 16
elements
IEC 61158-4-18 2010 Industrial communication networks - EN 61158-4-18 2012
Fieldbus specifications -- Part 4-18: Data-
link layer protocol specification - Type 18
elements
IEC 61158-4-18 2010 Industrial communication networks - EN 61158-4-18 2012
Fieldbus specifications -- Part 4-18: Data-
link layer protocol specification - Type 18
elements
IEC 61158-4-19 2014 Industrial communication networks - EN 61158-4-19 2014
Fieldbus specifications - Part 4-19: Data-
link layer protocol specification - Type 19
elements
IEC 61158-4-20 2014 Industrial communication networks - EN 61158-4-20 2014
Fieldbus specifications - Part 4-20: Data-
link layer protocol specification - Type 20
elements
IEC 61158-4-24 2014 Industrial communication networks - EN 61158-4-24 2014
Fieldbus specifications - Part 4-24: Data-
link layer protocol specification - Type 24
elements
- 5 - EN 61784-1:2014
IEC 61158-5-2 2014 Industrial communication networks - EN 61158-5-2 2014
Fieldbus specifications -- Part 5-2:
Application layer service definition - Type 2
elements
IEC 61158-5-3 2014 Industrial communication networks - EN 61158-5-3 2014
Fieldbus specifications - Part 5-3:
Application layer service definition - Type 3
elements
IEC 61158-5-4 2014 Industrial communication networks - EN 61158-5-4 2014
Fieldbus specifications - Part 5-4:
Application layer service definition - Type 4
elements
IEC 61158-5-5 2014 Industrial communication networks - EN 61158-5-5 2014
Fieldbus specifications - Part 5-5:
Application layer service definition - Type 5
elements
IEC 61158-5-7 2007 Industrial communication networks - EN 61158-5-7 2008
Fieldbus specifications - Part 5-7:
Application layer service definition - Type 7
elements
IEC 61158-5-8 2007 Industrial communication networks - EN 61158-5-8 2008
Fieldbus specifications - Part 5-8:
Application layer service definition - Type 8
elements
IEC 61158-5-9 2014 Industrial communication networks - EN 61158-5-9 2014
Fieldbus specifications - Part 5-9:
Application layer service definition - Type 9
elements
IEC 61158-5-16 2007 Industrial communication networks - EN 61158-5-16 2008
Fieldbus specifications - Part 5-16:
Application layer service definition - Type
16 elements
IEC 61158-5-18 2010 Industrial communication networks - EN 61158-5-18 2012
Fieldbus specifications -- Part 5-18:
Application layer service definition - Type
18 elements
IEC 61158-5-19 2014 Industrial communication networks - EN 61158-5-19 2014
Fieldbus specifications - Part 5-19:
Application layer service definition - Type
19 elements
IEC 61158-5-20 2014 Industrial communication networks - EN 61158-5-20 2014
Fieldbus specifications - Part 5-20:
Application layer service definition - Type
20 elements
IEC 61158-5-24 2014 Industrial communication networks - EN 61158-5-24 2014
Fieldbus specifications - Part 5-24:
Application layer service definition - Type
24 elements
IEC 61158-6-2 2014 Industrial communication networks - FprEN 61158-6-2 2014
Fieldbus specifications - Part 6-2:
Application layer protocol specification -
Type 2 elements
IEC 61158-6-3 2014 Industrial communication networks - EN 61158-6-3 2014
Fieldbus specifications - Part 6-3:
Application layer protocol specification -
Type 3 elements
IEC 61158-6-4 2014 Industrial communication networks - EN 61158-6-4 2014
Fieldbus specifications - Part 6-4:
Application layer protocol specification -
Type 4 elements
IEC 61158-6-5 2014 Industrial communication networks - EN 61158-6-5 2014
Fieldbus specifications - Part 6-5:
Application layer protocol specification -
Type 5 elements
IEC 61158-6-7 2007 Industrial communication networks - EN 61158-6-7 2008
Fieldbus specifications - Part 6-7:
Application layer protocol specification -
Type 7 elements
IEC 61158-6-8 2007 Industrial communication networks - EN 61158-6-8 2008
Fieldbus specifications - Part 6-8:
Application layer protocol specification -
Type 8 elements
IEC 61158-6-9 2014 Industrial communication networks - EN 61158-6-9 2014
Fieldbus specifications - Part 6-9:
Application layer protocol specification -
Type 9 elements
IEC 61158-6-16 2007 Industrial communication networks - EN 61158-6-16 2008
Fieldbus specifications - Part 6-16:
Application layer protocol specification -
Type 16 elements
IEC 61158-6-18 2010 Industrial communication networks - EN 61158-6-18 2012
Fieldbus specifications - Part 6-18:
Application layer protocol specification -
Type 18 elements
IEC 61158-6-19 2014 Industrial communication networks - EN 61158-6-19 2014
Fieldbus specifications - Part 6-19:
Application layer protocol specification -
Type 19 elements
IEC 61158-6-20 2014 Industrial communication networks - EN 61158-6-20 2014
Fieldbus specifications - Part 6-20:
Application layer protocol specification -
Type 20 elements
IEC 61158-6-24 2014 Industrial communication networks - EN 61158-6-24 2014
Fieldbus specifications - Part 6-24:
Application layer protocol specification -
Type-24 Elements
IEC 61784-2 2014 Industrial communication networks - EN 61784-2 2014
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on ISO/IEC
8802-3
IEC 61784-5-2 2013 Industrial communication networks - EN 61784-5-2 2013
Profiles -- Part 5-2: Installation of
fieldbuses - Installat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.