EN 61784-1:2010

Industrial communication networks - Profiles - Part 1: Fieldbus profiles

IEC 61784-1:2010(E) defines a set of protocol specific communication profiles based primarily on the IEC 61158 series, to be used in the design of devices involved in communications in factory manufacturing and process control. Each profile selects specifications for the communications protocol stack at a device. It contains a minimal set of required services at the application layer and specification of options in intermediate layers defined through references. If no application layer is included, then a minimal set of required services at the Data-link layer is specified. The appropriate references to the protocol specific types are given in each communication profile family or associated profiles. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: - update of the dated references to the IEC 61158 series, to IEC 61784-2, to the IEC 61784-3 series, to the IEC 61784-5 series and to IEC 61918 throughout the document; - update of the titles of the referenced documents and references if needed; - update of selection tables for CPF 1, CPF 2, CPF 5 and CPF 8.

Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile

Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain

Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC 61784-1:2010)

Ta del IEC 61784 določa nabor z protokolom določenih komunikacijskih profilov, uporabljenih predvsem na IEC 61158 seriji, za uporabo pri načrtovanju naprav, ki sodelujejo pri komunikacijah pri tovarniški proizvodnji in nadzoru procesov.  Vsak profil izbere specifikacije za komunikacijski protokolni sklad pri napravi. Vsebuje minimalni nabor zahtevanih storitev na plasti uporabe in specifikacijo možnostih v srednjih plasteh, določenih preko sklicev. Če plast uporabe ni vključena, je določen minimalni nabor zahtevanih storitev na plasti podatkovne povezave.  Primerno sklicevanje na za protokol značilne tipe je podane v vsaki družini komunikacijskih profilov ali v povezanih profilih.

General Information

• Status: Withdrawn
• Publication Date: 07-Oct-2010
• Withdrawal Date: 31-Aug-2013
• ICS: 35.100.20 - Data link layer
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Sep-2017
• Completion Date: 23-Sep-2017
• Ref Project: SIST EN 61784-1:2010 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-1:2010)

Relations

• Replaces: EN 61784-1:2008 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
• Effective Date: 29-Jan-2023
• Replaced By: EN 61784-1:2014 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61784-1:2010
01-december-2010
1DGRPHãþD
SIST EN 61784-1:2008
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2010)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-
1:2010)
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile (IEC 61784-1:2010)
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
(CEI 61784-1:2010)
Ta slovenski standard je istoveten z: EN 61784-1:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61784-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-1:2010

---------------------- Page: 2 ----------------------

SIST EN 61784-1:2010

EUROPEAN STANDARD
EN 61784-1

NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM

ICS 35.100.20; 35.240.50 Supersedes EN 61784-1:2008


English version


Industrial communication networks -
Profiles -
Part 1: Fieldbus profiles
(IEC 61784-1:2010)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 1: Profils pour les bus de terrain Teil 1: Feldbusprofile
(CEI 61784-1:2010) (IEC 61784-1:2010)




This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61784-1:2010
EN 61784-1:2010 - 2 -
Foreword
The text of document 65C/600/FDIS, future edition 3 of IEC 61784-1, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-1 on 2010-09-01.
This European Standard supersedes EN 61784-1:2008.
The main changes with respect to the previous edition are listed below:
– update of the dated references to the EN 61158 series, to EN 61784-2, to the EN 61784-3 series, to
the EN 61784-5 series and to EN 61918 throughout the document;
– update of the titles of the referenced documents and references if needed;
– update of selection tables for CPF 1, CPF 2, CPF 5 and CPF 8.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60079-14:2007 NOTE  Harmonized as EN 60079-14:2008 (not modified).
IEC 60079-25 NOTE  Harmonized as EN 60079-25.
IEC 60793 series NOTE  Harmonized in EN 60793 series (partially modified).
IEC 61131-3 NOTE  Harmonized as EN 61131-3.
IEC/TR 61158-1:2010 NOTE  Harmonized as CLC/TR 61158-1:2010 (not modified).
ISO/IEC 7498-1 NOTE  Harmonized as
...