EN 61332:2017
(Main)Soft ferrite material classification
Soft ferrite material classification
IEC 61332:2016(E) specifies classification rules for soft ferrite materials used in inductive components (inductors and transformers) fulfilling the requirements of the electronic industries. This document addresses the following issues for ferrite suppliers and users: - cross-reference between materials from multiple suppliers; - assistance to customers in understanding the published technical data in catalogues when comparing multiple suppliers; - guidance to customers in selecting the most applicable material for each application; - setting of nomenclature for IEC standards relating to ferrite; - establishing uniform benchmarks for suppliers for performance in new development of materials. This edition includes the following significant technical changes with respect to the previous edition: a) deleted "c" rank from subclass from Table 3, because of too large power loss density; b) added "a-wide" rank in subclasses PW3, PW4 and PW5 in Table 3; c) changed "B" of PW3 class from 100 mT to 200 mT; "B x f" and "power loss density" have also been changed; d) changed "B" of PW4 class from 50 mT to 100 mT; "B x f" and "power loss density" have also been changed.
Werkstoffeigenschaften von Ferritmaterialien
Classification des matériaux ferrites doux
L'IEC 61332:2016 spécifie les règles de classification pour les matériaux ferrites doux utilisés dans les composants inductifs (inductances et transformateurs) qui satisfont aux exigences des domaines de l’électronique. Le présent document traite des points suivants pour les fournisseurs et les utilisateurs de ferrite: - références croisées entre matériaux issus de plusieurs fournisseurs; - aide apportée aux clients pour comprendre les données techniques publiées dans les catalogues lors de la comparaison de plusieurs fournisseurs; - recommandations aux clients pour le choix du matériau le plus approprié pour chaque application; - établissement d'une nomenclature pour les normes IEC en rapport avec la ferrite; - établissement de références uniformes pour les fournisseurs sur la performance du nouveau développement de matériaux. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) rang "c" supprimé de la sous-classe du Tableau 3 à cause d'une densité de perte de puissance trop importante; b) rang "a-large" ajouté dans les sous-classes PW3, PW4 et PW5 dans le Tableau 3; c) "B" de la classe PW3 modifié de 100 mT à 200 mT; "B ´ f" et "densité de perte de puissance" ont également été modifiés; d) "B" de la classe PW4 modifié de 50 mT à 100 mT; "B ´ f" et "densité de perte de puissance" ont également été modifiés.
Klasifikacija mehkoferitnih materialov
Ta dokument določa pravila za klasifikacijo mehkoferitnih materialov, ki se uporabljajo v indukcijskih sestavnih delih (dušilke in transformatorji) ter izpolnjujejo zahteve industrije elektronske opreme.
Ta dokument obravnava naslednja vprašanja za dobavitelje in uporabnike feritov:
• navzkrižno sklicevanje med materiali več dobaviteljev;
• pomoč strankam pri razumevanju objavljenih tehničnih podatkov v katalogih med
primerjavo več dobaviteljev;
• smernice za stranke pri izbiri najprimernejšega materiala za posamezen primer uporabe;
• določitev poimenovanja za standarde IEC v zvezi s feritom;
• določitev enotnih meril za učinkovitost dobaviteljev pri razvoju novih materialov.
Številske vrednosti, podane v tem dokumentu, so tipične vrednosti parametrov (lastnosti) povezanih materialov. Neposreden prevod iz specifikacije materiala v osnovno specifikacijo ni vedno preprost ali mogoč.
Uporabnik in proizvajalec se morata dogovoriti o uporabi vsake podrobne specifikacije materiala in osnovne specifikacije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST EN 61332:2006
Klasifikacija mehkoferitnih materialov
Soft ferrite material classification
Werkstoffeigenschaften von Ferritmaterialien
Classification des matériaux ferrites doux
Ta slovenski standard je istoveten z: EN 61332:2017
ICS:
29.030 Magnetni materiali Magnetic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61332
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 29.100.10 Supersedes EN 61332:2005
English Version
Soft ferrite material classification
(IEC 61332:2016)
Classification des matériaux ferrites doux Werkstoffeigenschaften von Ferritmaterialien
(IEC 61332:2016) (IEC 61332:2016)
This European Standard was approved by CENELEC on 2016-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61332:2017 E
European foreword
The text of document 51/1146/FDIS, future edition 3 of IEC 61332, prepared by IEC/TC 51 "Magnetic
components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61332:2017.
The following dates are fixed:
(dop) 2017-09-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-12-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61332:2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61332:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60401-3:2015 NOTE Harmonized as EN 60401-3:2016 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-221 - International Electrotechnical - -
Vocabulary (IEV) - Chapter 221:
Magnetic materials and components
IEC 61332 ®
Edition 3.0 2016-11
INTERNATIONAL
STANDARD
Soft ferrite material classification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.100.10 ISBN 978-2-8322-3748-9
– 2 – IEC 61332:2016 IEC 2016
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions. 5
4 Classification . 5
4.1 Material classification . 5
4.2 Main classes . 6
4.3 Subclasses . 6
5 Soft ferrite material classes . 6
5.1 Materials used as impedances in interference suppression applications (IS
class) . 6
5.2 Materials used mainly in low flux density applications (B ≤ 5 mT) (SP class) . 7
5.3 Materials used mainly in high flux density applications (PW class) . 8
Bibliography . 10
Table 1 – IS class ferrite materials . 7
Table 2 – SP class ferrite materials . 8
Table 3 – PW class ferrite materials . 9
IEC 61332:2016 IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SOFT FERRITE MATERIAL CLASSIFICATION
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61332 has been prepared IEC technical committee 51: Magnetic
components, ferrite and magnet
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.