EN IEC 61169-61:2020
(Main)Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5
Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5
IEC 61169-61:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for coaxial connectors with a 9,5 mm inner diameter of the outer conductor and quick lock coupling mechanism, characteristic impedance 50 Ω and an operating frequency of up to 8,5 GHz. Series Q4.1-9.5 connectors with socket centre contact are compatible with threaded 4,1-9,5 series (specified in IEC 60169-11) connectors with pin centre contact. This type of connectors are starting to be applied in telecommunication systems due to their special features which are suitable for outdoor harsh requirements, such as quick and reliable coupling, compatible with threaded connector and being entirely waterproof. This document specifies mating face dimensions for general purpose connectors – grade 2, dimensional details of standard test connectors – grade 0, gauge information and test requirements, product ratings and characteristics, tests selected from IEC 61169-1, applicable to all detail specifications relating to Q4.1-9.5 series RF coaxial connectors. This document indicates the recommended performance characteristics to be considered when writing a detail specification and covers test schedules and inspection requirements for assessment levels M and H.
Hochfrequenz-Steckverbinder - Teil 61: Rahmenspezifikation für koaxiale HF-Steckverbinder mit 9,5 mm Innendurchmesser des Außenleiters und Schnellverschlusskupplung der Serie Q4.1-9.5
Connecteurs pour fréquences radioélectriques – Partie 61: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 9,5 mm, verrouillage rapide, série Q4.1-9.5
l’IEC 61169-61:2020, qui est une spécification intermédiaire (SS, en anglais Sectional Specification), fournit des informations et des règles pour l’établissement de spécifications particulières (DS, en anglais Detail Specification) pour les connecteurs coaxiaux avec un diamètre intérieur du conducteur extérieur de 9,5 mm et un mécanisme de verrouillage rapide, une impédance caractéristique de 50 Ω, et une fréquence de fonctionnement allant jusqu’à 8,5 GHz. Les connecteurs de série Q4.1-9.5 disposant d’un contact central en embase sont compatibles avec les connecteurs filetés de série 4.1-9.5 (spécifié dans l’IEC 60169-11) disposant d’un contact central en broche. Ces types de connecteurs commencent à être utilisés dans des systèmes de télécommunication car leurs fonctionnalités spéciales, telles qu’un couplage rapide et fiable, une compatibilité avec les connecteurs filetés et une étanchéité totale, conviennent aux exigences rigoureuses d’une utilisation en extérieur. Ce document spécifie les dimensions de la face d’accouplement pour les connecteurs à usage général (grade 2), les détails dimensionnels des connecteurs d’essai normalisé (grade 0), les informations du calibre et les exigences d’essai, les valeurs assignées et les caractéristiques du produit, les essais choisis à partir de l’IEC 61169-1, applicables à toutes les spécifications particulières relatives aux connecteurs coaxiaux pour fréquences radioélectriques de série Q4.1-9.5. Ce document indique les caractéristiques de performance recommandées à considérer lors de l’écriture d’une spécification particulière et il couvre les programmes d’essai et les exigences de contrôle pour les niveaux d’assurance M et H.
Radiofrekvenčni konektorji - 61. del: Področna specifikacija za radiofrekvenčne (RF) koaksialne konektorje z notranjim premerom zunanega vodnika 9,5 mm, hitra zaklepna sponka, serije Q4.1–9.5 (IEC 61169-61:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2020
Radiofrekvenčni konektorji - 61. del: Področna specifikacija za radiofrekvenčne
(RF) koaksialne konektorje z notranjim premerom zunanega vodnika 9,5 mm, hitra
zaklepna sponka, serije Q4.1–9.5 (IEC 61169-61:2020)
Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors
with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5 (IEC
61169-61:2020)
Hochfrequenz-Steckverbinder - Teil 61: Rahmenspezifikation für koaxiale HF-
Steckverbinder mit 9,5 mm Innendurchmesser des Außenleiters und
Schnellverschlusskupplung der Serie Q4.1-9.5 (IEC 61169-61:2020)
Connecteurs pour fréquences radioélectriques - Partie 61 : Spécification intermédiaire
relative aux connecteurs coaxiaux pour fréquences radioélectriques avec diamètre
intérieur du conducteur extérieur de 9,5 mm avec verrouillage rapide, série Q4.1-9.5
(IEC 61169-61:2020)
Ta slovenski standard je istoveten z: EN IEC 61169-61:2020
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61169-61
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 33.120.30
English Version
Radio-frequency connectors - Part 61: Sectional specification for
RF coaxial connectors with 9,5 mm inner diameter of outer
conductor, quick lock coupling, series Q4.1-9.5
(IEC 61169-61:2020)
Connecteurs pour fréquences radioélectriques - Partie 61: Hochfrequenz-Steckverbinder - Teil 61:
Spécification intermédiaire relative aux connecteurs Rahmenspezifikation für koaxiale HF-Steckverbinder mit 9,5
coaxiaux pour fréquences radioélectriques avec diamètre mm Innendurchmesser des Außenleiters und
intérieur du conducteur extérieur de 9,5 mm, verrouillage Schnellverschlusskupplung der Serie Q4.1-9.5
rapide, série Q4.1-9.5 (IEC 61169-61:2020)
(IEC 61169-61:2020)
This European Standard was approved by CENELEC on 2020-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61169-61:2020 E
European foreword
The text of document 46F/492/FDIS, future edition 1 of IEC 61169-61, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-61:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-01
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61169-61:2020 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 61169-1 2013 Radio frequency connectors - Part 1: Generic EN 61169-1 2013
specification - General requirements and
measuring methods
IEC 62037-3 2012 Passive RF and microwave devices, EN 62037-3 2012
intermodulation level measurement - Part 3:
Measurement of passive intermodulation in
coaxial connectors
IEC 61169-61 ®
Edition 1.0 2020-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio-frequency connectors –
Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner
diameter of outer conductor, quick lock coupling, series Q4.1-9.5
Connecteurs pour fréquences radioélectriques –
Partie 61: Spécification intermédiaire relative aux connecteurs coaxiaux pour
fréquences radioélectriques avec diamètre intérieur du conducteur extérieur
de 9,5 mm, verrouillage rapide, série Q4.1-9.5
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.30 ISBN 978-2-8322-8238-0
– 2 – IEC 61169-61:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Mating face and gauge information . 7
4.1 General connectors – Grade 2 . 7
4.1.1 Connector with pin centre contact . 7
4.1.2 Connector with socket centre contact . 8
4.2 Gauges . 10
4.2.1 Gauge pin for socket centre contact. 10
4.2.2 Gauge rings for plug outer contact . 11
4.3 Standard test connectors – Grade 0 . 12
4.3.1 Standard test connector with pin centre contact . 12
4.3.2 Standard test connector with socket centre contact . 14
5 Quality assessment procedure . 15
5.1 General . 15
5.2 Rating and characteristics (see Clause 5 of IEC 61169-1：2013) . 15
5.3 Test schedule and inspection requirements. 18
5.3.1 Acceptance tests (See Table 8) . 18
5.3.2 Periodic tests (See Table 9). 18
5.4 Procedures for qualification approval . 20
5.4.1 Quality conformance inspection . 20
5.4.2 Qualification approval and its maintenance . 20
5.4.3 Periodic tests . 20
6 Instructions for preparation of detail specifications . 20
6.1 General . 20
6.2 Identification of the component . 21
6.3 Performance . 21
6.4 Marking, ordering information and related matters . 21
6.5 Selection of tests, test conditions and severities . 21
6.6 Blank detail specification pro-forma for Q4.1-9.5 connectors . 21
7 Marking . 26
7.1 Marking of component . 26
7.2 Marking and contents of package . 26
Annex A (informative) Q4.1-9.5 series quick lock RF coaxial connectors protective
sealing . 27
A.1 General . 27
A.2 The outline of connector . 27
A.2.1 The outline of cable connector . 27
A.2.2 The outline of panel connector(socket) . 28
A.3 Protective sleeves . 29
A.3.1 Protective sleeve of cable connector. 29
A.3.2 Protective sleeve of panel connector . 29
Bibliography . 31
Figure 1 – Connector with pin centre contact . 7
IEC 61169-61:2020 © IEC 2020 – 3 –
Figure 2 – Connector with socket centre contact . 9
Figure 3 – Gauge pin for socket centre contact . 10
Figure 4 – Gauge ring for plug outer contact . 11
Figure 5 – Standard test connector with pin–centre contact . 13
Figure 6 – Standard test connector with socket centre contact . 14
Figure A.1 – Cable connector(plug) outline . 27
Figure A.2 – Cable connector(socket) outline . 28
Figure A.3 – Panel connector outline . 28
Figure A.4 – Protective sleeve outline . 29
Figure A.5 – Panel style protective sleeve outline . 30
Table 1 – Dimensions of connector with pin centre contact . 8
Table 2 – Dimensions of connector with socket centre contact . 10
Table 3 – Dimensions of gauge pin for socket centre contact . 11
Table 4 – Dimensions of gauge rings for plug outer contact . 12
Table 5 – Dimensions of standard test connector with pin-centre contact . 13
Table 6 – Dimensions of standard test connector with socket centre contact . 15
Table 7 –Ratings and characteristics . 16
Table 8 – Acceptance tests .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.