EN 175101-809:2004
(Main)Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
This European Standard applies to two-part connector for printed boards with a basic grid of 2,54 mm, common mounting features and 16 to 48 contacts. A standard style with angled male contacts in the free connector and straight female contacts in the fixed connector and a reversed style with angled female contacts in the free connector and straight male contacts in the fixed connector.
Bauartspezifikation: Indirekte Steckverbinder für gedruckte Schaltungen, Raster 2,54 mm, kurze Ausführung entsprechend CECC 75 101-801 mit bewerteter Qualität
Spécification particulière: Connecteurs en deux parties pour circuits imprimés sur une grille de base de 2,54 mm, version simplifiée en conformité avec la CECC 75 101-801, pour l'assurance de la qualité
Podrobna specifikacija – Dvodelni konektorji za plošče tiskanega vezja z rastrom 2,54 mm, kratka različica v skladu s CECC 75101-801, z ocenjeno kakovostjo
General Information
Relations
Standards Content (Sample)
STANDARDPodrobna specifikacija – Dvodelni konektorji za plošče tiskanega vezja z rastrom 2,54 mm, kratka različica v skladu s CECC 75101-801, z ocenjeno kakovostjoDetail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 175101-809:2005(en)ICS31.220.10
EUROPEAN STANDARD
EN 175101-809 NORME EUROPÉENNE EUROPÄISCHE NORM
March 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 175101-809:2004 E
ICS 31.220.10 Supersedes EN 175101-809:1999
English version
Detail specification: Two-part connectors for printed boards
having a grid of 2,54 mm, short version
in compliance with CECC 75 101-801, with assessed quality
Spécification particulière: Connecteurs en deux parties pour circuits imprimés
sur une grille de base de 2,54 mm, version simplifiée en conformité avec
la CECC 75 101-801, pour l'assurance de la qualité
Bauartspezifikation: Indirekte Steckverbinder für gedruckte Schaltungen, Raster 2,54 mm, kurze Ausführung entsprechend
CECC 75 101-801 mit bewerteter Qualität
This European Standard was approved by CENELEC on 2004-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Foreword
This European Standard was prepared by Reporting Secretariat 48B (former CLC/TC 48B,
LF connectors).
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 175101-809 on 2004-02-01.
This European Standard supersedes EN 175101-809:1999.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-02-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-02-01 __________
- 3 - EN 175101-809:2004
Contents Page 1 Scope.4 2 Normative references.4 3 Style designation.6 4 Common features.7 4.1 Mounting dimensions.7 4.2 Mating information.10 4.3 Survey of styles.10 5 Dimensions.10 5.1 General.10 5.2 Fixed board connector.11 5.3 Free board connector.17 5.4 Mating information.21 5.5 Accessories (for information only).21 5.6 Mounting information of fixed board connectors.21 5.7 Mounting information for free board connectors.22 6 Gauges.22 7 Characteristics.23 7.1 Climatic category.23 7.2 Electrical.23 7.3 Mechanical.25 8 Test schedule.25 8.1 General.25 8.2 Test schedule tables.28 9 Quality assessment procedures.36 9.1 Qualification approval testing.36 9.2 Quality conformance inspection.37 9.3 Delayed delivery, re-inspection.39 10 Ordering information.39
1 Scope This European Standard applies to two-part connector for printed boards with a basic grid of 2,54 mm, common mounting features and 16 to 48 contacts. A standard style with angled male contacts in the free connector and straight female contacts in the fixed connector and a reversed style with angled female contacts in the free connector and straight male contacts in the fixed connector. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the edition indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60068-1:1988, Environmental testing - Part 1: General and guidance
IEC 60097:1991; Grid systems for printed circuits IEC 60194:1999, Printed board design, manufacture and assembly - Terms and definitions
IEC 60326-3:1991, Printed boards - Part 3: Design and use of printed boards IEC 60352-1:1997, Solderless connections - Part 1: Solderless wrapped connections, General requirements, tests methods and practical guidance IEC 60352-5:2001, Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
IEC 60410:1973, Sampling plans and procedures for inspection by attributes IEC 60512-1:2001, Connectors for electronic equipment - Tests and measurements - Part 1: General IEC 60512-1-1:2002, Connectors for electronic equipment - Tests and measurements -
Part 1-1: General examination - Test 1a: Visual examination IEC 60512-1-2:2002, Connectors for electronic equipment - Tests and measurements -
Part 1-2: General examination - Test 1b: Examination of dimension and mass IEC 60512-2:1985, Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests IEC 60512-2-1:2002, Connectors for electronic equipment - Tests and measurements -
Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method IEC 60512-2-5:2003, Connectors for electronic equipment - Tests and measurements -
Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance IEC 60512-3-1:2002, Connectors for electronic equipment - Tests and measurements -
Part 3-1: Insulation tests - Test 3a: Insulation resistance IEC 60512-4-1:2003, Connectors for electronic equipment : Tests and measurements -
Part 4-1: Voltage stress tests - Test 4a: Voltage proof IEC 60512-4-2:2002, Connectors for electronic equipment - Tests and measurements -
Part 4-2: Voltage stress tests - Test 4b: Partial discharge IEC 60512-5:1992, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests IEC 60512-6:1984, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 6: Climatic tests and soldering tests IEC 60512-6-1:2002, Connectors for electronic equipment - Tests and measurements -
Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
- 5 - EN 175101-809:2004
IEC 60512-6-3:2002, Connectors for electronic equipment - Tests and measurements -
Part 6-3: Dynamic stress tests - Test 6c: Shock IEC 60512-6-4:2002, Connectors for electronic equipment - Tests and measurements -
Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) IEC 60512-7:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests IEC 60512-8:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations IEC 60512-9:1992, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests IEC 60512-11-1:1995, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence IEC 60512-11-3:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-3: Climatic tests - Test 11c: Damp heat, steady state IEC 60512-11-4:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-4: Climatic tests - Test 11d: Rapid change of temperature IEC 60512-11-5:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-5: Climatic tests - Test 11e: Mould growth IEC 60512-11-8:1995, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust IEC 60512-11-9:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-9: Climatic tests - Test 11i: Dry heat IEC 60512-11-10:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-10: Climatic tests - Test 11j: Cold IEC 60512-11-11:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-11: Climatic tests - Test 11k: Low air pressure IEC 60512-11-12:2002, Connectors for electronic equipment - Tests and measurements -
Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic IEC 60512-11-14:2003, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 14: Test 11p: Flowing single gas corrosion test IEC 60603-1:1991, Connectors for frequencies below 3 MHz for use with printed boards -
Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality IEC 60603-1-am1:1992, Amendment No. 1 IEC 60603-2: 1995, Connectors for frequencies below 3 MHz for use with printed boards -
Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features IEC 61076-1:1995, Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
IEC 61076-4:1995, Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
ISO 272:1982, Fasteners - Hexagon products - Widths across flats ISO 468:1982, Surface roughness – Parameters, their values and general rules for specifying requirements IEC QC 001002:1986, Rules of procedure of the IEC Quality Assessment System for Electronic Components (IECQ); Amendment 2: 1994
3 Style designation
Connectors according to this specification shall be designated by the following system:
,
NOTE "L"
stands for letter
"N" stands for number Example: Connector style C, having 48 gold plated male contacts with solder terminals. Complete board-mounted connector for boards up to 1,6mm, with performance level 2 and assessment level G:
CECC 75101-809-C048MS-1C1-2G. Reference to this specification CECC 75101-809
L
N
N
N
L
LN
L
N N
L Letter denoting the style of connector
For details see 4.3
and 5 B C Q R
Number of contacts For details see 4.3 and 5 016032048Letter denoting styleof contact Two-part connector male
female MF
Letter denoting basicstyle and number denoting application oftermination Solder
Compliant Press-in Wrapped connection
Press-in and wrapped conn. Press-in with wrapped conn. and rear side mating Not ap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.