EN 60695-11-2:2014

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-2:2013 gives the requirements for the production and confirmation of a nominal 1 kW, propane/air pre-mixed test flame. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition of IEC 60695-11-2 cancels and replaces the first edition published in 2003. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition: - editorial changes to align with other TC 89 test flame publications; - editorially updated throughout; - technical changes to the burner set up requirements (see 4.1, 4.2.2, 5 and Fig. A.6); - technical changes to the test flame confirmation procedure (see 6.2 and 6.3). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. Key words: Flame, Pre-mixed flame 1 kW test flame

Prüfungen zur Beurteilung der Brandgefahr - Teil 11-2: Prüfflammen - 1-kW-Flamme mit Gas-Luft-Gemisch: Prüfeinrichtung und Leitfaden

Essais relatifs aux risques du feu - Partie 11-2: Flammes d'essai - Flamme à prémélange de 1 kW nominal - Appareillage, disposition d'essai de vérification et indications

L'IEC 60695-11-2:2013 donne les exigences pour la production et la validation d'une flamme d'essai de type à prémélange à base de propane/air de 1 kW nominal. La présente publication fondamentale de sécurité est destinée à être utilisée par les comités d'études dans le cadre de l'élaboration de normes conformément aux principes établis dans le Guide CEI 104 et le Guide ISO/CEI 51. L'une des responsabilités d'un comité d'études consiste, le cas échéant, à utiliser les publications fondamentales de sécurité dans le cadre de l'élaboration de ses publications. Les exigences, les méthodes d'essai ou les conditions d'essai de la présente publication fondamentale de sécurité ne s'appliquent pas sauf référence spécifique ou inclusion dans les publications correspondantes. Cette deuxième édition de la CEI 60695-11-2 annule et remplace la première édition publiée en 2003. Elle constitue une révision technique. Cette deuxième édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modifications rédactionnelles pour correspondre à d'autres publications sur la flamme d'essai du TC 89; - actualisation rédactionnelle de l'ensemble du texte; - modifications techniques apportées aux exigences de montage du brûleur - voir 4.1, 4.2.2, 5 et Fig. A.6; - modifications techniques apportées à la procédure de confirmation de la flamme d'essai - voir 6.2 et 6.3. Cette norme a le statut d'une publication fondamentale de sécurité conformément au Guide CEI 104 et au Guide ISO/CEI 51. Mots clés: Flamme, Flamme d'essai de type à prémélange de 1 kW

Preskušanje požarne ogroženosti - 11-2. del: Preskusni plameni - Predmešani plamen z nazivno močjo 1 kW: Aparat, način potrditvenega preskušanja in navodilo (IEC 60695-11-2:2013)

Ta del standarda IEC 60695 podaja zahteve za izdelavo in potrditev propanskega/z zrakom predmešanega preskusnega plamena z nazivno močjo 1 kW. Ta osnovna varnostna publikacija je namenjena tehničnim odborom za pripravo standardov v skladu z načeli vodil IEC Guide 104 in ISO/IEC Guide 51. Ena od odgovornosti tehničnih odborov je, da med pripravo publikacij uporabljajo osnovne varnostne publikacije, kadar je to primerno. Zahteve, preskusne metode ali preskusni pogoji iz te osnovne varnostne publikacije se ne uporabljajo, razen če so izrecno navedeni ali zajeti v ustrezne publikacije.

General Information

• Status: Withdrawn
• Publication Date: 20-Mar-2014
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• Technical Committee: CLC/SR 89 - Fire hazard testing
• Drafting Committee: IEC/TC 89 - IEC_TC_89
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jul-2020
• Completion Date: 13-Jul-2020
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 60695-11-2:2014 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance

Relations

• Replaces: EN 60695-11-2:2003 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
• Effective Date: 29-Jan-2023
• Replaced By: EN 60695-11-2:2017 - Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
• Effective Date: 26-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3UHGPHãDQLPrüfungen zur Beurteilung der Brandgefahr - Teil 11-2: Prüfflammen - 1-kW-Flamme (Nennwert) mit Gas/Luft-Gemisch - Prüfaufbau, Vorkehrungen zur Bestätigungsprüfung und LeitfadenEssais relatifs aux risques du feu - Partie 11-2: Flammes d'essai - Flamme à prémélange de 1 kW nominal, Appareillage, disposition d'essai de vérification et indicationsFire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance29.020Elektrotehnika na splošnoElectrical engineering in general13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 60695-11-2:2014SIST EN 60695-11-2:2014en01-maj-2014SIST EN 60695-11-2:2014SLOVENSKI
STANDARDSIST EN 60695-11-2:20041DGRPHãþD



SIST EN 60695-11-2:2014



EUROPEAN STANDARD EN 60695-11-2 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2014
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60695-11-2:2014 E
ICS 13.220.40 Supersedes EN 60695-11-2:2003
English version
Fire hazard testing -
Part 11-2: Test flames -
1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-2:2013)
Essais relatifs aux risques du feu -
Partie 11-2: Flammes d'essai -
Flamme à prémélange de 1 kW nominal - Appareillage, disposition d'essai de vérification et indications (CEI 60695-11-2:2013)
Prüfungen zur Beurteilung der Brandgefahr -
Teil 11-2: Prüfflammen -
1-kW-Flamme mit Gas-Luft-Gemisch: Prüfeinrichtung und Leitfaden (IEC 60695-11-2:2013)
This European Standard was approved by CENELEC on 2014-01-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60695-11-2:2014



EN 60695-11-2:2014 - 2 - Foreword The text of document 89/1193/FDIS, future edition 2 of IEC 60695-11-2, prepared by IEC/TC 89 "Fire hazard testing" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60695-11-2:2014.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-10-14 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-01-14
This document supersedes EN 60695-11-2:2003.
EN 60695-11-2:2014 includes the following significant technical changes with respect to
EN 60695-11-2:2003: – editorial changes to align with other TC 89 test flame publications; – editorially updated throughout; – technical changes to the burner set up requirements – see 4.1, 4.2.2, 5 and Fig. A.6; – technical changes to the test flame confirmation procedure – see 6.2 and 6.3.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice The text of the International Standard IEC 60695-11-2:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60695-1-10 NOTE Harmonised as EN 60695-1-10. IEC 60695-1-11 NOTE Harmonised as EN 60695-1-11. SIST EN 60695-11-2:2014



- 3 - EN 60695-11-2:2014 Annex ZA
(normative)
Normative references to i
...