EN 61753-101-3:2008

Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment

This part of IEC 61753 contains the minimum test and measurement severities which a specific product must satisfy in order to be categorised as meeting the IEC standard, Category U - Uncontrolled environment, as defined in Annex A of IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 101-3: Einzelfasermanagementsysteme für die Kategorie U - Unkontrollierte Umgebung

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 101-3: Systèmes de gestion de fibres pour la Catégorie U - Environnement non contrôlé

La présente partie de la CEI 61753 contient les sévérités minimales d'essai et de mesure auxquelles un produit spécifique doit satisfaire pour être classé comme satisfaisant à la norme CEI, Catégorie U - Environnement non contrôlé, tel que défini en Annexe A de la CEI 61753-1.

Tehnični standard za optične spojne elemente in pasivne komponente - 101-3. del: Sistemi za upravljanje optičnih elementov za kategorijo U - Nenadzorovano okolje (IEC 61753-101-3:2006)

General Information

• Status: Withdrawn
• Publication Date: 28-Aug-2008
• Withdrawal Date: 31-May-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Nov-2022
• Completion Date: 01-Nov-2022
• Ref Project: SIST EN 61753-101-3:2008 - Fibre optic interconnecting devices and passive components performance standard -- Part 101-3: Fibre management systems for Category U - Uncontrolled environment

Relations

• Replaced By: EN IEC 61753-101-03:2021 - Fibre optic interconnecting devices and passive components performance standard - Part 101-03: Fibre management systems for category OP - Outdoor protected environment
• Effective Date: 09-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2008
7HKQLþQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
6LVWHPL]DXSUDYOMDQMHRSWLþQLKHOHPHQWRY]DNDWHJRULMR81HQDG]RURYDQRRNROMH
,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 101-3: Fibre management systems for Category U - Uncontrolled environment (IEC
61753-101-3:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
101-3: Einzelfasermanagementsysteme für die Kategorie U - Unkontrollierte Umgebung
(IEC 61753-101-3:2006)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 101-3: Systèmes de gestion de fibres pour la Catégorie
U - Environnement non contrôlé (CEI 61753-101-3:2006)
Ta slovenski standard je istoveten z: EN 61753-101-3:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-101-3
NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices
and passive components performance standard -
Part 101-3: Fibre management systems for Category U -
Uncontrolled environment
(IEC 61753-101-3:2006)
Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 101-3: Systèmes de gestion Betriebsverhalten -
de fibres pour la Catégorie U - Teil 101-3:
Environnement non contrôlé Einzelfasermanagementsysteme
(CEI 61753-101-3:2006) für die Kategorie U -
Unkontrollierte Umgebung
(IEC 61753-101-3:2006)
This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-101-3:2008 E

Foreword
The text of document 86B/2364/FDIS, future edition 1 of IEC 61753-101-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-101-3 on 2008-06-01.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2009-03-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2011-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-101-3:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE  Harmonized as EN 60068-1:1994 (not modified).
IEC 60332 NOTE  Harmonized in EN 60332 series (not modified).
IEC 60794-2 NOTE  Harmonized as EN 60794-2:2003 (not modified).
IEC 60794-3 NOTE  Harmonized as EN 60794-3:2002 (not modified).
IEC 61300 NOTE  Harmonized in EN 61300 series (not modified).
__________
- 3 - EN 61753-101-3:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60068-2-64 - Environmental testing - EN 60068-2-64 1994
Part 2: Test methods - Test Fh: Vibration,
broad-band random (digital control) and
guidance
1) 2)
IEC 60721-3-1 - Classification of environmental conditions - EN 60721-3-1 1997
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 1: Storage
1) 2)
IEC 60721-3-2 - Classification of environmental conditions - EN 60721-3-2 1997
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 2: Transportation
1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2004
Part 2-50: Product specifications - Sectional + corr. July 2004
specification for class B single-mode fibres

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

1) 2)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
1) 2)
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-112: Tests - Impact
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
1) 2)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
1) 2)
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

1) 2)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

1) 2)
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 2007
passive components - Basic test and
measurement procedures -
Part 2-33: Tests - Assembly and disassembly
of fibre optic closures
1) 2)
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
1) 2)
IEC 61300-2-46 - Fibre optic interconnecting devices and EN 61300-2-46 2006
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic

1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 2002
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
1) 2)
IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
1) 2)
IEC 62134-1 - Fibre optic enclosures - EN 62134-1 2002
Part 1: Generic specification
NORME CEI
INTERNATIONALE IEC
61753-101-3
INTERNATIONAL
Première édition
STANDARD
First edition
2006-10
Norme de qualité de fonctionnement
des dispositifs d’interconnexion et
composants passifs à fibres optiques –
Partie 101-3:
Systèmes de gestion
de fibres pour la Catégorie U –
Environnement non contrôlé
Fibre optic interconnecting devices and
passive components performance standard –
Part 101-3:
Fibre management systems for Category U –
Uncontrolled environment
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
T
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61753-101-3 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9

1 Scope.11
2 Normative references.11
3 Terms, definitions and abbreviations .15
3.1 Terms and definitions .15
3.2 Abbreviations.15
4 Environmental requirements .17
5 Test procedure .17
5.1 General .17
5.2 Stationary use .17
5.3 Storage .19
5.4 Transportation .19
5.5 Installation or intervention.19
6 General requirements .21
6.1 Storage, transportation and packaging .21
6.2 Marking and identification .21
6.3 Materials .21
6.4 Traceability.23
6.5 Safety.23
6.6 Documentation .23
7 Performance requirements.25
7.1 Sample size.25
7.2 Performance details.25

Annex A (normative) Sample definition .35
Annex B (normative) Sample size.41
Annex C (informative) Access and reconfiguration/resplicing .
...