Fibre optic interconnecting devices and passive components performance standard - Part 101-03: Fibre management systems for category OP - Outdoor protected environment

This part of IEC 61753 contains the minimum tests, test severities and measurement requirements which a fibre management system need to meet in order to be categorised as meeting the IEC standard, category OP - Outdoor Protected environment, as defined in IEC 61753-1. This performance standard for fibre management systems defines the requirements for standard optical performance under a set of specified conditions. It contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly referred to as an operating service environment or performance category, is intended to be a basis to prove the product’s ability to satisfy the requirements of a specific application, market sector or user group.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 101-03: Fasermanagementsysteme für die Kategorie OP - Freiluft, geschützte Umgebung

Norme de performance pour les dispositifs d’interconnexion et composants passifs fibroniques - Partie 101-03: Systèmes de gestion de fibres pour la catégorie OP - Environnement extérieur protégé

IEC 61753-101-03:2021 contient les essais minimaux, ainsi que les sévérités d’essai et les exigences de mesure minimales auxquels il est nécessaire qu’un système de gestion de fibres satisfasse afin de pouvoir être classé comme satisfaisant à la norme IEC, Catégorie OP – Environnement extérieur protégé, telle qu’elle est définie dans l’IEC 61753-1. La présente norme de qualité de fonctionnement pour les systèmes de gestion de fibres définit les exigences de qualité de fonctionnement optique normalisée selon un ensemble de conditions spécifiées. Elle contient une série ou un ensemble d'essais et de mesurages avec des conditions, des sévérités et des critères d’acceptation/de rejet clairement définis. Les séries d'essais, auxquelles il est généralement fait référence en tant qu'environnement de service de fonctionnement ou en tant que catégorie de qualité de fonctionnement, sont destinées à constituer une base de démonstration de l'aptitude du produit à satisfaire aux exigences d'une application, d'un secteur de marché ou d'un groupe d'utilisateurs spécifiques. Cette première édition annule et remplace l’IEC 61753-101-3, la première édition parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) les termes et définitions ont été mis à jour conformément à l’IEC 61753-1:2018 et à l’IEC 61756‑1:2019; b) les sévérités d’essai ont été mis à jour conformément à l’IEC 61753-1:2018; c) des essais matériels détaillés pour les moisissures (IEC 60068-2-10) et l'exposition à la lumière UV (ISO 4892-3) ont été ajoutés; d) des exigences détaillées de qualité de fonctionnement du transport ont été supprimées; e) des fibres de sous-catégorie B-657 (IEC 60793-2-50) pour les échantillons d’essai (Annexe A)ont été ajoutées.

Tehnični standard za optične spojne elemente in pasivne komponente - 101-03. del: Sistemi za upravljanje optičnih elementov za kategorijo OP - Zunanje zaščiteno okolje (IEC 61753-101-03:2021)

Ta del standarda IEC 61753 vsebuje minimalne zahteve glede preskusov, stopenj zahtevnosti preskusov in merjenja, ki jih mora izpolnjevati sistem za upravljanje optičnih elementov, da ustreza zahtevam kategorije OP v standardu IEC – Zunanje zaščiteno okolje, kot je opredeljeno v standardu IEC 61753-1.
Ta tehnični standard za sisteme za upravljanje optičnih elementov določa zahteve za standardno optično zmogljivost v določenih pogojih. Vsebuje niz oziroma nabor preskusov in meritev z jasno določenimi pogoji, stopnjami zahtevnosti in merili za uspešno/neuspešno opravljen preskus. Niz preskusov, ki se običajno imenuje operativno storitveno okolje ali kategorija učinkovitosti, je namenjen kot podlaga za dokazovanje, ali lahko izdelek izpolnjuje zahteve določenega načina uporabe, tržnega sektorja ali skupine uporabnikov.

General Information

Status
Published
Publication Date
04-Nov-2021
Withdrawal Date
31-Oct-2022
Current Stage
6060 - Document made available - Publishing
Start Date
05-Nov-2021
Completion Date
05-Nov-2021

Relations

Buy Standard

Standard
EN IEC 61753-101-03:2022
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN 61753-101-3:2008
Tehnični standard za optične spojne elemente in pasivne komponente - 101-03.
del: Sistemi za upravljanje optičnih elementov za kategorijo OP - Zunanje
zaščiteno okolje (IEC 61753-101-03:2021)
Fibre optic interconnecting devices and passive components performance standard -
Part 101-03: Fibre management systems for category OP - Outdoor protected
environment (IEC 61753-101-03:2021)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
101-3: Einzelfasermanagementsysteme für die Kategorie OP - Geschützte
Freiluftanwendungen (IEC 61753-101-03:2021)
Norme de performance pour les dispositifs d’interconnexion et composants passifs
fibroniques - Partie 101-03: Systèmes de gestion de fibres pour la catégorie OP -
Environnement extérieur protégé (IEC 61753-101-03:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-101-03:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61753-101-03
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 33.180.20 Supersedes EN 61753-101-3:2008 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components
performance standard - Part 101-03: Fibre management
systems for category OP - Outdoor protected environment
(IEC 61753-101-03:2021)
Norme de performance pour les dispositifs d'interconnexion Lichtwellenleiter - Verbindungselemente und passive
et composants passifs fibroniques - Partie 101-03: Bauteile - Betriebsverhalten - Teil 101-3:
Systèmes de gestion de fibres pour la catégorie OP - Einzelfasermanagementsysteme für die Kategorie OP -
Environnement extérieur protégé Geschützte Freiluftanwendungen
(IEC 61753-101-03:2021) (IEC 61753-101-03:2021)
This European Standard was approved by CENELEC on 2021-11-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-101-03:2021 E

European foreword
The text of document 86B/4497/FDIS, future edition 1 of IEC 61753-101-03, prepared by SC 86B
“Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–08–01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022–11–01
document have to be withdrawn
This document supersedes EN 61753-101-3:2008 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-101-03:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1
IEC 60332 (series) NOTE Harmonized as EN IEC 60332 (series)
IEC 60794-2 NOTE Harmonized as EN 60794-2
IEC 60794-3 NOTE Harmonized as EN 60794-3
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-10 - Environmental testing - Part 2–10: Tests - EN 60068-2-10 -
Test J and guidance: Mould growth
IEC 60721-3-1 - Classification of environmental conditions - EN IEC 60721-3-1 -
Part 3–1: Classification of groups of
environmental parameters and their
severities - Storage
IEC 60721-3-2 - Classification of environmental conditions - EN IEC 60721-3-2 -
Part 3–2: Classification of groups of
environmental parameters and their
severities – Transportation and handling
IEC 60793-2-50 - Optical fibres - Part 2–50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2–1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2–9: Tests
- Shock
IEC 61300-2-22 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 -
passive components - Basic test and
measurement procedures - Part 2–33:
Tests - Assembly and disassembly of fibre
optic mechanical splices, fibre
management systems and closures
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2–42:
Tests - Static side load for strain relief
IEC 61300-2-46 - Fibre optic interconnecting devices and EN IEC 61300-2-46 -
passive components - Basic test and
measurement procedures - Part 2–46:
Tests - Damp heat, cyclic
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures - Part 3–1:
Examinations and measurements - Visual
examination
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3–3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3–28:
Examinations and measurements -
Transient loss
IEC 61753-1 - Fibre optic interconnecting devices and EN IEC 61753-1 -
passive components - Performance
standard - Part 1: General and guidance
IEC 61756-1 - Fibre optic interconnecting devices and EN IEC 61756-1 -
passive components - Interface standard
for fibre management systems - Part 1:
General and guidance
ISO 4892-3 - Plastics - Methods of exposure to EN ISO 4892-3 -
laboratory light sources - Part 3:
Fluorescent UV lamps
IEC 61753-101-03 ®
Edition 1.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components performance

standard –
Part 101-03: Fibre management systems for category OP – Outdoor protected

environment
Norme de performance pour les dispositifs d’interconnexion et composants

passifs fibroniques –
Partie 101-03: Systèmes de gestion de fibres pour la catégorie OP –

Environnement extérieur protégé

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-1029-2

– 2 – IEC 61753-101-03:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviated terms . 8
5 General requirements . 8
5.1 General . 8
5.2 Storage, transportation and packaging . 9
5.3 Installation and intervention . 9
5.4 Marking and identification . 9
5.5 Materials . 9
5.6 Safety . 10
6 Test . 10
6.1 General . 10
6.2 Test sample preparation . 11
6.3 Test and measurement methods . 11
6.4 Sample size . 11
6.5 Pass/fail criteria . 11
6.6 Test report . 11
7 Performance requirements. 12
7.1 Pass/fail criteria . 12
7.2 Performance requirements . 13
Annex A (normative) Sample construction . 16
A.1 Fibre type for test sample . 16
A.2 FMS test sample configuration . 17
A.2.1 FMS test sample configuration with splices only . 17
A.2.2 FMS test sample with splices and connectors . 19
Annex B (normative) Installation test . 21
Annex C (informative) Access and reconfiguration tests . 22
Bibliography . 23

Figure A.1 – Sample configuration with splices only for climatic tests . 17
Figure A.2 – Sample configuration with splices only for mechanical tests . 18
Figure A.3 – Sample configuration with splices and connectors for climatic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.