prEN IEC 62037-8:2024
(Main)Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation
Passive HF- und Mikrowellengeräte, Intermodulationspegelmessung - Teil 8: Messung der passiven Intermodulation, verursacht durch Objekte, die HF-Strahlung ausgesetzt sind
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 8: Mesure de l’intermodulation passive générée par des objets exposés au rayonnement RF
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 8. del: Merjenje pasivne intermodulacije, ki jo ustvarjajo objekti, izpostavljeni sevanju RF
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve
intermodulacijskega nivoja - 8. del: Merjenje pasivne intermodulacije, ki jo
ustvarjajo objekti, izpostavljeni sevanju RF
Passive RF and microwave devices, intermodulation level measurement - Part 8:
Measurement of passive intermodulation generated by objects exposed to RF radiation
Passive HF- und Mikrowellengeräte, Intermodulationspegelmessung - Teil 8: Messung
der passiven Intermodulation, verursacht durch Objekte, die HF-Strahlung ausgesetzt
sind
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 8:
Mesure de l’intermodulation passive générée par des objets exposés au rayonnement
RF
Ta slovenski standard je istoveten z: prEN IEC 62037-8:2024
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
46/993/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62037-8 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-04-05 2024-06-28
SUPERSEDES DOCUMENTS:
46/951/CD, 46/984/CC
IEC TC 46 : CABLES, WIRES, WAVEGUIDES, RF CONNECTORS, RF AND MICROWAVE PASSIVE COMPONENTS AND ACCESSORIES
SECRETARIAT: SECRETARY:
United States of America Mr David Hess
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 46A,SC 46F
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of
passive intermodulation generated by objects exposed to RF radiation
PROPOSED STABILITY DATE: 2029
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 62037-8 © IEC 2024 2 46/993/CDV
NOTE FROM TC/SC OFFICERS:
46/993/CDV 3 IEC CDV 62037-8 © IEC 2024
1 CONTENTS
2 FOREWORD . 4
3 1 Scope . 6
4 2 Normative references . 6
5 3 Terms, definitions and abbreviated terms . 6
6 3.1 Terms and definitions . 6
7 3.2 Abbreviated terms . 6
8 4 General considerations . 7
9 4.1 Test environment . 7
10 4.2 Safety . 7
11 5 Test set-up . 7
12 5.1 Test configurations . 7
13 5.1.1 General . 7
14 5.1.2 Antenna type . 8
15 5.1.3 Antenna directivity . 8
16 5.1.4 Antenna VSWR . 8
17 5.1.5 Antenna polarization . 9
18 5.1.6 DUT location . 9
19 5.1.7 DUT orientation . 10
20 5.2 Dynamic stimulus . 11
21 5.3 Verification tests . 11
22 5.3.1 Residual PIM verification . 11
23 5.3.2 VSWR verification . 11
24 6 Test specification . 11
25 7 Report . 11
27 Figure 1 – Radiated PIM test set-up, single antenna, single band . 7
28 Figure 2 – Radiated PIM test set-up, dual antenna, dual band . 8
29 Figure 3 – Radiated PIM test set-up, dual antenna, single band . 8
30 Figure 4 – Test zone definition . 10
31 Figure 5 – Flat object definition . 10
32 Figure 6 – Rotate antenna or DUT to change polarization . 11
IEC CDV 62037-8 © IEC 2024 4 46/993/CDV
35 INTERNATIONAL ELECTROTECHNICAL COMMISSION
36 ____________
38 PASSIVE RF AND MICROWAVE DEVICES,
39 INTERMODULATION LEVEL MEASUREMENT –
41 Part 8: Measurement of passive intermodulation
42 generated by objects exposed to RF radiation
44 FOREWORD
45 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
46 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
47 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
48 to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
49 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
50 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
51 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
52 participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
53 in accordance with conditions determined by agreement between the two organizations.
54 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
55 consensus of opinion on the relevant subjects since each technical committee has representation from all interested
56 IEC National Committees.
57 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
58 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
59 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
60 by any end user.
61 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
62 transparently to the maximum extent possible in their national and regional publications. Any divergence between any
63 IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
64 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
65 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
66 carried out by independent certification bodies.
67 6) All users should ensure that they have the latest edition of this publication.
68 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
69 of its technical committees and IEC National Committees for any personal injury, property damage or other damage
70 of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of
71 the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
72 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
73 indispensable for the correct application of this publication.
74 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
75 rights. IEC shall not be held responsible for identifying any or all such patent rights.
76 IEC 62037-8 has been prepared by technical committee 46: Cables, wires, waveguides, RF
77 connectors, RF and microwave passive components and accessories. It is an International
78 Standard.
79 The text of this International Standard is based on the following documents:
Draft Report on voting
46/902/FDIS 46/911/RVD
81 Full information on the voting for its approval can be found in the report on voting indicated in the
82 above table.
83 The language used for the development of this International Standard is English.
46/993/CDV 5 IEC CDV 62037-8 © IEC 2024
84 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
85 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available at
86 www.iec.ch/members_experts/refdocs. The main document types developed by IEC are described
87 in greater detail at www.iec.ch/standardsdev/publications.
88 A list of all parts of the IEC 62037 series, under the general title: Passive RF and microwave
89 devices, intermodulation level measurement, can be found on the IEC website.
90 The committee has decided that the contents of this document will remain unchanged until the
91 stability date indicated on the IEC website under webstore.iec.ch in the data related to the specific
92 document. At this date, the document will be
93 • reconfirmed,
94 • withdrawn,
95 • replaced by a revised edition, or
96 • amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
IEC CDV 62037-8 © IEC 2024 6 46/993/CDV
100 PASSIVE RF AND MICROWAVE DEVICES,
101 INTERMODULATION LEVEL MEASUREMENT –
103 Part 8: Measurement of passive intermodulation
104 generated by objects exposed to RF radiation
108 1 Scope
109 This part of IEC 62037 defines a radiated passive intermodulation (PIM) test to determine PIM
110 levels generated by a device or object when it is exposed to RF radiation. This test can be
111 conducted on any material or object and is not limited to devices designed to propagate RF signals.
112 This test can be conducted as either a near field or far field test as defined by the test specification
113 in an outdoor test site or in an anechoic test chamber.
114 2 Normative references
115 The following documents are referred to in the text in such a way that some or all of their content
116 constitutes requirements of this document. For dated references, only the edition cited applies. For
117 undated references, the latest edition of the referenced document (including any amendments)
118 applies.
119 IEC 62037-1, Passive RF and microwave devices, intermodulation level measurement – Part 1:
120 General requirements and measuring methods
121 IEC 62037-6:2021, Passive RF and microwave devices, intermodulation level measurement –
122 Part 6: Measurement of passive intermodulation in antennas
123 3 Terms, definitions and abbreviated terms
124 3.1 Terms and definitions
125 No terms and definitions are listed in this document.
126 ISO and IEC maintain terminological databases for use in standardization at the following
127 addresses:
128 • IEC Electropedia: available at https://www.electropedia.org/
129 • ISO Online browsing platform: available at https://www.iso.org/obp
130 3.2 Abbreviated terms
131 AIM Active inte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.