EN 60315-4:1998/prA1
(Amendment)Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
Meßverfahren für Funkempfänger für verschiedene Sendearten - Teil 4: Empfänger für frequenzmodulierte Ton-Rundfunksendungen
Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes d'émission - Partie 4: Récepteurs pour émissions de radiodiffusion en modulation de fréquence
Merilne metode za radijske sprejemnike za različne razrede emisij - 4. del: Sprejemniki za frekvenčno modulirane zvočne radiodifuzijske emisije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2025
Merilne metode za radijske sprejemnike za različne razrede emisij - 4. del:
Sprejemniki za frekvenčno modulirane zvočne radiodifuzijske emisije
Methods of measurement on radio receivers for various classes of emission - Part 4:
Receivers for frequency-modulated sound broadcasting emissions
Meßverfahren für Funkempfänger für verschiedene Sendearten - Teil 4: Empfänger für
frequenzmodulierte Ton-Rundfunksendungen
Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes
d'émission - Partie 4: Récepteurs pour émissions de radiodiffusion en modulation de
fréquence
Ta slovenski standard je istoveten z: EN 60315-4:1998/prA1
ICS:
33.160.20 Radijski sprejemniki Radio receivers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
100/4290/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60315-4/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-04-04 2025-06-27
SUPERSEDES DOCUMENTS:
100/4098/CD, 100/4288/CC
IEC TA 1 : TERMINALS FOR AUDIO, VIDEO AND DATA SERVICES AND CONTENT
SECRETARIAT: SECRETARY:
Korea, Republic of Mr Kwang-Soon Choi
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 1 - Methods of measurement on radio receivers for various classes of emission - Part 4:
Receivers for frequency-modulated sound broadcasting emissions
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
100/4290/CDV 2 IEC 60315-4/AMD1 ED2 © IEC 2025
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 AMENDMENT 1 - METHODS OF MEASUREMENT ON RADIO RECEIVERS
5 FOR
6 VARIOUS CLASSES OF EMISSION –
8 Part 4: Receivers for frequency-modulated
9 sound broadcasting emissions
13 FOREWORD
14 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
15 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
16 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
17 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
18 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
19 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
20 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
21 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
22 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
23 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
24 consensus of opinion on the relevant subjects since each technical committee has representation from all
25 interested IEC National Committees.
26 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
27 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
28 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
29 misinterpretation by any end user.
30 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
31 transparently to the maximum extent possible in their national and regional publications. Any divergence between
32 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
33 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
34 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
35 services carried out by independent certification bodies.
36 6) All users should ensure that they have the latest edition of this publication.
37 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
38 members of its technical committees and IEC National Committees for any personal injury, property damage or
39 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
40 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
41 Publications.
42 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
43 indispensable for the correct application of this publication.
44 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
45 patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
46 respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
47 may be required to implement this document. However, implementers are cautioned that this may not represent
48 the latest information, which may be obtained from the patent database available at https://patents.iec.ch [and/or]
49 www.iso.org/patents. IEC shall not be held responsible for identifying any or all such patent rights.
50 Amendment 1 to IEC 60315-4:1997 has been prepared by subcommittee TA1: Terminals for
51 audio, video and data services and content, of IEC technical committee TC100: Audio, video
52 and multimedia systems and equipment.
IEC 60315-4/AMD1 ED2 © IEC 2025 3 100/4290/CDV
53 The text of this Amendment is based on the following documents:
Draft Report on voting
100/4098/CD 100/4288/CC
55 Full information on the voting for its approval can be found in the report on voting indicated in
56 the above table.
57 The language used for the development of this Amendment is English.
58 This document was drafted in accordance with ISO/IEC Directives, Part 2, and d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.