iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

33.160.20 - Radio receivers

ICS 33.160.20 Details

Radio receivers

Funkempfangsgerate. Fernsehempfangsgerate

Recepteurs radio

Radijski sprejemniki

General Information

Parent
33.160 - Audio, video and audiovisual engineering

e-Library Subscription

Create subscription and get permanent access to documents within 33.160.20 - Radio receivers

Type
Monthly Subscription
for
seat
×
$ 115.53
$ 115.53

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
IEC
IEC 62106-10:2021(Main)
Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 10: UECP - Universal Encoder Communication Protocol

IEC 62106-10:2021(E) describes the Universal Encoder Communication Protocol – UECP. The UECP has as its primary objectives to satisfy the need for harmonized RDS encoder communication protocols and to facilitate the interworking of various RDS systems components, such as RDS servers, data bridges and encoders, regardless of the supplier. Furthermore, a harmonised network environment and encoder model is being maintained to facilitate the interchange of component parts of RDS network systems. These harmonized models and a universal layered protocol are specified, based on the ISO/OSI recommendation. The UECP encompasses all current RDS features including any new developments using the ODA protocol.

  • Standard
    101 pages
    English language
    sale 15% off
IEC
IEC 62106-9:2021(Main)
Radio Data System (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 9: RBDS - RDS variant used in North America

IEC 62106-9:2021 specifies the Radio Broadcast Data System (RBDS), which is an RDS-compatible variant used in countries of North America. RBDS was first standardized by the U.S. National Radio Systems Committee (NRSC) in 1993 and subsequently revised in 1998, 2004, 2005 and 2011 . With the publication of this edition of IEC 62106, the RDS and RBDS standards are now harmonized into a single document. The frequency range of operation (64,0 MHz to 108,0 MHz as indicated by the title of this document) varies according to regional regulatory authority. The U.S. range is 88 MHz to 108 MHz, as set by the U.S. Federal Communications Commission.

  • Standard
    19 pages
    English language
    sale 15% off
IEC
IEC 60721-2-4:2018(Main)
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature

IEC 60721-2-4:2018 is also available as IEC 60721-2-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60721-2-4:2018 presents a broad division into types of solar radiation areas. It is intended to be used as part of the background material when selecting appropriate severities of solar radiation for product applications. All types of geographical areas are covered, except areas with altitudes above 5 000 m. This second edition cancels and replaces the first edition published in 1987 and Amendment 1:1988. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Figures updated including the addition of global irradiation information
- Format updated.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 62442-2:2018(Main)
Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

IEC 62442-2:2018 is also available as IEC 62442-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62442-2:2018 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). A calculation method of the efficiency of controlgear for high intensity discharged lamp(s) is also defined. It is assumed that the controlgear are designed for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision and has been harmonized with IEC 62442-1 and IEC 62442-3.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC TR 63065:2017(Main)
Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station

IEC TR 63065:2017(E) provides general guidance on basic principles and general proposals for the safe and economic operation and maintenance of an LCC converter station.
These guidelines are based on the operation and maintenance practices that have been used successfully during the last decades at HVDC converter stations all over the world, and can be referred to by new HVDC users to optimize operation and maintenance policy and assist in performing the operation and maintenance work.
This document focuses only on the operation and maintenance of the equipment inside an LCC converter station, including back-to-back HVDC systems. The operation and maintenance of HVDC overhead transmission lines, HVDC cables and voltage sourced converter (VSC) are not covered by this document.

  • Technical report
    50 pages
    English language
    sale 15% off
  • Technical report
    104 pages
    English language
    sale 15% off
IEC
IEC 62841-3-10:2015/COR1:2016(Corrigendum)
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
  • Standard
    10 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-18-2:2011(Main)
Information technology - UPnP Device Architecture - Part 18-2: Remote Access Device Control Protocol - Remote Access Client Device

ISO/IEC 29431-18-2:2011(E) Contains device definition which is compliant with the UPnP Device Architecture version 1.0. It defines a device type referred to herein as RAClient device. The RAClient device is a UPnP device that allows control points to configure Remote Access Clients. This device provides control points with the following functionality: - Enumerate the Remote Access Transport mechanisms supported by the Remote Access Client (RAC). - Enumerate the Credentials Delivery mechanisms supported by the RAC. - Configure active Remote Access Transport profiles.

  • Standard
    5 pages
    English language
    sale 15% off
IEC
ISO/IEC 29341-18-3:2011(Main)
Information technology - UPnP Device Architecture - Part 18-3: Remote Access Device Control Protocol - Remote Access Server Device

ISO/IEC 29341-18-3:2011(E) includes the device definition which is compliant with the UPnP Device Architecture version 1.0. It defines a device type referred to herein as RAServer Device. The RAServer Device is a UPnP Device UPnP device that allows control points to configure Remote Access Servers. This Device provides control points with the following functionality: - Determine if the Remote Access Server is reachable from the public Internet; - Enable a Remote Access Server to be reachable from the public Internet; - Enumerate the Remote Access Transport mechanisms supported by the Remote Access Server; - Enumerate the Credentials Delivery mechanisms supported by the Remote Access Server; - Configure active Remote Access Transport profiles; - Configure filters for allowing which local Devices are visible in remote networks; - Configure filters for allowing which remote Devices are visible in the local network; - Maintains list of registered remote users, and authenticates when they log in depending on their pre-configured info appropriately.

  • Standard
    6 pages
    English language
    sale 15% off
CLC
EN 60730-1:2000/A16:2007(Amendment)
Automatic electrical controls for household and similar use - Part 1: General requirements
SIST EN 60730-1:2001/A16:2007

Same dow as in A12, A14 and A15 * Superseded by EN 60730-1:2011

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2000/A14:2005(Amendment)
Automatic electrical controls for household and similar use - Part 1: General requirements
SIST EN 60730-1:2001/A14:2005

Superseded by EN 60730-1:2011

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2000/A12:2003(Amendment)
Automatic electrical controls for household and similar use - Part 1: General requirements
SIST EN 60730-1:2001/A12:2004

Superseded by EN 60730-1:2011

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55013:2002/IS1:2009
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
EN 55013:2001/IS1:2009

Applies to the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. Describes the methods of measurement applicable to sound and television receivers or associated equipment and specifies limits for the control of disturbance from such equipment. The frequency range covered extends from 9 kHz to 400 GHz.

  • Addendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2000/A13:2004(Amendment)
Automatic electrical controls for household and similar use - Part 1: General requirements
SIST EN 60730-1:2001/A13:2005

Superseded by EN 60730-1:2011

  • Amendment
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55013:2002/A2:2007(Amendment)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
EN 55013:2001/A2:2006

superseded by EN 55013:2013

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62028:2004(Main)
General methods of measurement for digital television receivers
SIST EN 62028:2004

Deals with the determination of performance and allows the comparison of equipment, by listing the characteristics useful for specifications and laying down uniform measuring methods.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55013:2002/A1:2004(Amendment)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
EN 55013:2001/A1:2003

D115/098: SC 210A disbanded

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60315-3:1999/A1:1999(Amendment)
Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
SIST EN 60315-3:2001/A1:2001

EN following parallel vote

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 62028:2002(Main)
General methods of measurement for digital television receivers

IEC 62028:2002 describes standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. It deals with the determination of performance and allows the comparison of equipment by listing the characteristics which are useful for specifications and by laying down uniform measuring methods of these characteristics. Performance requirements are not specified, since they are specified by other international, regional or domestic standards for the systems. This bilingual version corresponds to the monolingual English version, published in 2002-02.

  • Standard
    47 pages
    English language
    sale 15% off
  • Standard
    94 pages
    English and French language
    sale 15% off
CLC
EN 50201:2001(Main)
Interfaces for DVB-IRD
SIST EN 50201:2009

This European Standard is an application standard, identifying recommended interfaces for connections of digital video broadcast integrated receiver decoder (DVB-IRD) equipment. If a recommended interface is supported, then the full specification of that interface, which may include options, applies. Interfaces not mentioned in this document are not excluded and especially interfaces which are under development at the time of writing of this document may be added at a later stage. For mechanical and electrical details of the interfaces, reference is made to existing standards of IEC or CENELEC wherever possible, or standards which are known to be in an advanced state of development.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50320:2001(Main)
Digital audio broadcasting system - Specification of the DAB command set for receivers (DCSR)
EN 50320:2000

This standard describes a command set which should be used to control DAB receivers. The coding of these commands is also described. This command set is intended to be used on different physical bus systems. The coding should be mapped transparently on different physical interfaces.
Selection conflict management, dynamic bandwidth problems and the device addressing are not within the scope of this document.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60315-3:2001(Main)
Methods of measurement on radio receivers for various classes of emission -- Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
EN 60315-3:1999

Applies to radio receivers for the reception of amplitude-modulated sound broadcasting emissions. Deals mainly with measurements using radio-frequency signals applied to the antenna terminals of the receiver, or induced in a magnetic antenna. Is intended to be read in conjuction with HD 560.1

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60315-3:2001/A1:2001(Amendment)
Methods of measurement on radio receivers for various classes of emission -- Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
EN 60315-3:1999/A1:1999

EN following parallel vote

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2000(Main)
Automatic electrical controls for household and similar use - Part 1: General requirements
SIST EN 60730-1:2001

Applies to automatic electrical controls for household and similar use. Part 1 gives the general requirements. Parts 2 to be used in conjunction with Part 1 will give particular requirements for specific types of controls.

  • Standard
    285 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50320:2000(Main)
Digital audio broadcasting system - Specification of the DAB command set for receivers (DCSR)
SIST EN 50320:2001

This standard describes a command set which should be used to control DAB receivers. The coding of these commands is also described. This command set is intended to be used on different physical bus systems. The coding should be mapped transparently on different physical interfaces. Selection conflict management, dynamic bandwidth problems and the device addressing are not within the scope of this document.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60315-3:1999(Main)
Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
SIST EN 60315-3:2001

Applies to radio receivers for the reception of amplitude-modulated sound broadcasting emissions. Deals mainly with measurements using radio-frequency signals applied to the antenna terminals of the receiver, or induced in a magnetic antenna. Is intended to be read in conjuction with HD 560.1

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61319-1:1996/A11:1999(Amendment)
Interconnections of satellite receiving equipment - Part 1: Europe
SIST EN 61319-1:1999/A11:2003

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60107-5:1992+AMD1:1999 CSV(Main)
Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system

Applies to television receivers designed for the reception of television broadcasts using the two-channel digital sound system. The sound coding-system is based on NICAM 728 and is transmitted by a quadrature phase-shift keying (QPSK) modulated digital subcarrier. This consolidated version consists of the first edition (1992) and its amendment 1 (1999). Therefore, no need to order amendment in addition to this publication.

  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 60315-3:1989(Main)
Methods of measurement on radio receivers for various classes of emission. Part 3: Receivers for amplitude-modulated sound-broadcasting emissions

Applies to radio receivers for the reception of amplitude-modulated sound broadcasting emissions. Deals mainly with measurements using radio-frequency signals applied to the antenna terminals of the receiver, or induced in a magnetic antenna. Is intended to be read in conjuction with IEC 60315-1. The contents of the corrigendum of April 1994 have been included in this copy.

  • Standard
    10 pages
    English and French language
    sale 15% off
  • Standard
    87 pages
    English and French language
    sale 15% off
IEC
IEC 60315-3:1989+AMD1:1999 CSV(Main)
Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions

Applies to radio receivers for the reception of amplitude-modulated sound broadcasting emissions. Deals mainly with measurements using radio-frequency signals applied to the antenna terminals of the receiver, or induced in a magnetic antenna. Is intended to be read in conjuction with IEC 60315-1. The contents of the corrigendum of March 1994 have been included in this copy. This consolidated version consists of the second edition (1989) and its amendment 1 (1999). Therefore, no need to order amendment in addition to this publication.

  • Standard
    87 pages
    English and French language
    sale 15% off
IEC
IEC 60107-3:1988+AMD1:1999 CSV(Main)
Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems

Applies to broadcast television receivers designed for the reception of multichannel sound using subcarriers. Is applicable to both the FM-FM and BTSC systems described in CCIR Report 795. This consolidated version consists of the first edition (1988) and its amendment 1 (1999). Therefore, no need to order amendment in addition to this publication.

  • Standard
    55 pages
    English and French language
    sale 15% off
SIST
SIST EN 60315-4:1999(Main)
Methods of measurement on radio receivers for various classes of emission -- Part 4: Receivers for frequency-modulated sound broadcasting emissions
EN 60315-4:1998

Applies to radio receives and tuners for the reception of frequency- modulated sound-broadcasting emissions with rated maximum system deviations of ±75 kHz and ±50 kHz in ITU Band 8. Deals mainly with methods of measurement using radiofrequency signals applied to the antenna terminals of the receiver.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60315-7:1999(Main)
Methods of measurement on radio receivers for various classes of emission -- Part 7: Methods of measurement on digital satellite radio (DSR) receivers
EN 60315-7:1995

EN following parallel vote

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60107-5:1992/AMD1:1999(Amendment)
Amendment 1 - Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
  • Standard
    7 pages
    English and French language
    sale 15% off
IEC
IEC 60315-3:1989/AMD1:1999(Amendment)
Amendment 1 - Methods of measurement on radio receivers for various classes of emission. Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 60107-3:1988/AMD1:1999(Amendment)
Amendment 1 - Recommended methods of measurement on receivers for television broadcast transmissions. Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
  • Standard
    9 pages
    English and French language
    sale 15% off
CLC
EN 50256:1998(Main)
Characteristics of DVB receivers
SIST EN 50256:1999

This standard specifies the characteristics of Digital Video Broadcast (DVB) receivers for satellite, cable and terrestrial reception in Europe

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61305-2:1998(Main)
Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 2: FM radio tuners
SIST EN 61305-2:1999

Applies to household high-fidelity radio tuner units with facilities for reception of frequency modulation sound broadcasts with a rated maximum system deviation of ±75 kHz, using the pilot-tone system for sterophonic broadcasting. May be applied to systems using a rated maximum system deviation of ±50 kHz by decreasing all the stated deviations in proportion.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60315-4:1998(Main)
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
SIST EN 60315-4:1999

Applies to radio receives and tuners for the reception of frequency- modulated sound-broadcasting emissions with rated maximum system deviations of ±75 kHz and ±50 kHz in ITU Band 8. Deals mainly with methods of measurement using radiofrequency signals applied to the antenna terminals of the receiver.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50255:1997(Main)
Digital Audio Broadcasting system - Specification of the Receiver Data Interface (RDI)
SIST EN 50255:1999

The Eureka 147 Digital Audio Broadcasting System is able to transmit data rates of up 1.8432 Mbit/s. This data rate occurs if an EEP with a coderate of 0.8 is selected. Audio receivers generally will be capable to decode one or several MSC Subchannels, but will not contain decoders for all possible data services. Therefore, the source for the data to be carried on the Receiver Data Interface (RDI) is the output bit stream of the channel decoder of a DAB receiver. Dedicated decoders for data applications, computers, etc., but also devices for audio postprocessing and recording can be connected to the DAB receiver through this interface

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60107-2:1997(Main)
Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels
SIST EN 60107-2:1999

Deals with the general methods of measurement of the audio channels of television receivers for monophonic and multichannel sound systems. Deals with the determination of performance and permits the comparison of equipment by listing characteristics useful for specifications and by laying down uniform methods of measurement.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60107-1:1997(Main)
Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
SIST EN 60107-1:1999

Deals with the standard conditions and methods of measurement on television receivers that conform to the terrestrial broadcast television standards specified by the ITU-R. Such receivers may be used for direct off-air reception, reception via cabled networks or as a monitor for prerecorded video, home movies and games among other applications. Deals with the determination of performance and permits the comparison of equipment by listing the characteristics which are useful for specifications and by laying down uniform methods of measurement for these characteristics. performance requirements are not specified.

  • Standard
    202 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60107-7:1997(Main)
Methods of measurement on receivers for television - Part 7: HDTV displays
SIST EN 60107-7:1999

Deals with the standard conditions and methods of measurement on high definition television (HDTV) displays. Deals with the determination of performance and permits comparision of equipment by listing characteristics useful for specifications and laying down uniform methods of measurement.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60315-4:1997(Main)
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions

Applies to radio receives and tuners for the reception of frequency- modulated sound-broadcasting emissions with rated maximum system deviations of ±75 kHz and ±50 kHz in ITU Band 8. Deals mainly with methods of measurement using radiofrequency signals applied to the antenna terminals of the receiver.

  • Standard
    147 pages
    English and French language
    sale 15% off
IEC
IEC 61305-2:1997(Main)
Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 2: FM radio tuners

Applies to household high-fidelity radio tuner units with facilities for reception of frequency modulation sound broadcasts with a rated maximum system deviation of ±75 kHz, using the pilot-tone system for sterophonic broadcasting. May be applied to systems using a rated maximum system deviation of ±50 kHz by decreasing all the stated deviations in proportion.

  • Standard
    17 pages
    English and French language
    sale 15% off
CLC
EN 50203:1996/A1:1997(Amendment)
Automatic channel installation (ACI)
SIST EN 50203:1999/A1:1999

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50203:1996(Main)
Automatic channel installation (ACI)
SIST EN 50203:1999

This document specifies elements and describes characteristics for remote channel-installation of TV and VCR sets, by use of teletext

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61319-1:1996(Main)
Interconnections of satellite receiving equipment - Part 1: Europe
SIST EN 61319-1:1999

Deals with the standardization of interconnections and matching values for satellite receivers for individual television and sound radio broadcast reception in the 10,70 GHz to 12,75 GHz band.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50094:1992/A1:1995(Amendment)
Access control system for the MAC/packet family: EUROCRYPT
SIST EN 50094:1999/A1:1999

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60107-5:1992(Main)
Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
SIST EN 60107-5:1999

Applies to television receivers designed for the reception of television broadcasts using the two-channel digital sound system. The sound coding-system is based on NICAM 728 and is transmitted by a quadrature phase-shift keying (QPSK) modulated digital subcarrier.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50094:1992(Main)
Access control system for the MAC/packet family: EUROCRYPT
SIST EN 50094:1999

This document describes an access control system designated EUROCRYPT which can be applied to systems in the MAC/packet family. The access control system is responsible for ensuring that television, radio programmes, or data services are accessible only to those customers who have satisfied clearly specified conditions, usually payment related

  • Standard
    195 pages
    English language
    sale 10% off
    e-Library read for
    1 day
50