EN 50216-4:2002
(Main)Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
EN 50216-4 specifies basic accessories of transformers, such as thermometer pockets, to be used for liquid immersed transformers, earth terminals; to be used for liquid immersed and dry-type transformers, draining plugs, to be used for liquid immersed distribution transformers, filling openings, to be used for liquid immersed distribution transformers, wheel assembly, choice and distance between centres, to be used for liquid immersed and dry-type distribution transformers.
Zubehör für Transformatoren und Drosselspulen - Teil 4: Kleine Zubehörteile (Erdungsanschlussstück, Ablass- und Fülleinrichtungen, Thermometertasche, Rollen)
Accessoires pour transformateurs de puissance et bobines d'inductance - Partie 4: Accessoires de base (borne de terre, orifice de remplissage, vanne de vidange, doigt de gant, galets de roulement)
Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2002
Power transformer and reactor fittings - Part 4: Basic accessories (earthing
terminal, drain and filling devices, thermometer pocket, wheel assembly)
Power transformer and reactor fittings -- Part 4: Basic accessories (earthing terminal,
drain and filling devices, thermometer pocket, wheel assembly)
Zubehör für Transformatoren und Drosselspulen -- Teil 4: Kleine Zubehörteile
(Erdungsanschlussstück, Ablass- und Fülleinrichtungen, Thermometertasche, Rollen)
Accessoires pour transformateurs de puissance et bobines d'inductance -- Partie 4:
Accessoires de base (borne de terre, orifice de remplissage, vanne de vidange, doigt de
gant, galets de roulement)
Ta slovenski standard je istoveten z: EN 50216-4:2002
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50216-4
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2002
ICS 29.180
English version
Power transformer and reactor fittings
Part 4: Basic accessories (earthing terminal,
drain and filling devices, thermometer pocket,
wheel assembly)
Accessoires pour transformateurs Zubehör für Transformatoren
de puissance et bobines d'inductance und Drosselspulen
Partie 4: Accessoires de base Teil 4: Kleine Zubehörteile
(borne de terre, orifice de remplissage, (Erdungsanschlussstück,
vanne de vidange, doigt de gant, Ablass- und Fülleinrichtungen,
galets de roulement) Thermometertasche, Rollen)
This European Standard was approved by CENELEC on 2001-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50216-4:2002 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 14, Power
transformers.
The text of the draft was submitted to the formal vote and was approved by CENELEC as
EN 50216-4 on 2001-07-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-08-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-08-01
EN 50216-4 is to be read in conjunction with EN 50216-1.
__________
- 3 - EN 50216-4:2002
Contents
Page
1 Scope . 4
2 Normative references. 4
3 Definitions. 4
4 Thermometer pockets to be used for liquid immersed transformers. 4
4.1 General. 4
4.2 Dimensions of thermometer pockets. 5
5 Earth terminals to be used for liquid immersed and dry-type transformers . 5
5.1 General. 5
5.2 Dimensions of different earth terminals . 6
6 Draining plug to be used for liquid immersed distribution transformers . 6
6.1 General. 6
6.2 Dimensions of different devices. 7
7 Filling openings to be used for liquid immersed distribution transformers. 8
7.1 General. 8
7.2 Dimensions . 8
8 Wheel assembly, choice and distance between centres to be used for liquid
immersed and dry-type distribution transformers . 9
8.1 General. 9
8.2 Requirements. 9
1 Scope
EN 50216-4 specifies basic accessories of transformers, su
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.