EN 60034-14:2004/A1:2007
(Amendment)Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
Drehende elektrische Maschinen - Teil 14: Mechanische Schwingungen von bestimmten Maschinen mit einer Achshöhe von 56 mm und höher - Messung, Bewertung und Grenzwerte der Schwingstärke
Machines électriques tournantes - Partie 14: Vibrations mécaniques de certaines machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et limites de l'intensité vibratoire
Električni rotacijski stroji - 14. del: Mehanske vibracije nekaterih strojev, ki imajo gredi visoke 56 mm in več - Meritve, vrednotenje in mejne vrednosti resnih vibracij (IEC 60034-14:2003/A1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60034-14:2004/A1:2007
01-september-2007
(OHNWULþQLURWDFLMVNLVWURMLGHO 0HKDQVNHYLEUDFLMHQHNDWHULKVWURMHYNLLPDMR
JUHGLYLVRNHPPLQYHþ0HULWYHYUHGQRWHQMHLQPHMQHYUHGQRVWLUHVQLKYLEUDFLM
,(& $
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with
shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
severity (IEC 60034-14:2003/A1:2007)
Drehende elektrische Maschinen - Teil 14: Mechanische Schwingungen von bestimmten
Maschinen mit einer Achshöhe von 56 mm und höher - Messung, Bewertung und
Grenzwerte der Schwingstärke (IEC 60034-14:2003/A1:2007)
Machines électriques tournantes - Partie 14: Vibrations mécaniques de certaines
machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et
limites de l'intensité vibratoire (CEI 60034-14:2003/A1:2007)
Ta slovenski standard je istoveten z: EN 60034-14:2004/A1:2007
ICS:
17.160 Vibracije, meritve udarcev in Vibrations, shock and
vibracij vibration measurements
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-14:2004/A1:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60034-14/A1
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 29.160
English version
Rotating electrical machines -
Part 14: Mechanical vibration of certain machines
with shaft heights 56 mm and higher -
Measurement, evaluation and limits of vibration severity
(IEC 60034-14:2003/A1:2007)
Machines électriques tournantes - Drehende elektrische Maschinen -
Partie 14: Vibrations mécaniques Teil 14: Mechanische Schwingungen
de certaines machines de hauteur d'axe von bestimmten Maschinen mit einer
supérieure ou égale à 56 mm - Achshöhe von 56 mm und höher -
Mesurage, évaluation et limites Messung, Bewertung und Grenzwerte
de l'intensité vibratoire der Schwingstärke
(CEI 60034-14:2003/A1:2007) (IEC 60034-14:2003/A1:2007)
This amendment A1 modifies the European Standard EN 60034-14:2004; it was approved by CENELEC on
2007-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-14:2004/A1:2007 E
---------------------- Page: 2 ----------------------
EN 60034-14:2004/A1:2007 - 2 -
Foreword
The text of document 2/1416/FDIS, future amendment 1 to IEC 60034-14:2003, prepared by IEC TC 2,
Rotating machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as amendment A1 to EN 60034-14:2004 on 2007-06-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2008-03-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2010-06-01
__________
Endorsement notice
The text of amendment 1:2007 to the International Standard IEC 60034-14:2003 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE
IEC
60034-14
INTERNATIONAL
2003
STANDARD
AMENDEMENT 1
AMENDMENT 1
2007-02
Amendement 1
Machines électriques tournantes –
Partie 14:
Vibrations mécaniques de certaines machines
de hauteur d’axe supérieure ou égale à 56 mm –
Mesurage, évaluation et limites de l’intensité
vibratoire
Amendment 1
Rotating electrical machines
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.