EN 61512-3:2008

Batch control - Part 3: General and site recipe models and representation

IEC 61512-3:2008 on Batch Control defines a model for general and site recipes; the activities that describe the use of general and site recipes within a company and across companies; a representation of general and site recipes; and a data model of general and site recipes. This first edition cancels and replaces IEC/PAS 61512-3, published in 2004.

Chargenorientierte Fahrweise - Teil 3: Modelle und Darstellungen von Verfahrens- und Werksrezepten

Contrôle-commande des processus de fabrication par lots - Partie 3: Modèles et représentation des recettes générales et des recettes de site

La CEI 61512-3:2008 relative au contrôle-commande des processus de fabrication par lots définit un modèle pour les recettes générales et les recettes de site, les activités décrivant l'utilisation des recettes générales et des recettes de site intra et interentreprises, une représentation des recettes générales et des recettes de site, ainsi qu'un modèle de données des recettes générales et des recettes de site.

Nadzor šarže - 3. del: Splošni in prilagojeni recepturni modeli in njihove predstavitve (IEC 61512-3:2008)

General Information

• Status: Published
• Publication Date: 24-Sep-2008
• Withdrawal Date: 31-Jul-2011
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Parallel Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Sep-2008
• Completion Date: 25-Sep-2008
• Ref Project: SIST EN 61512-3:2009 - Batch control -- Part 3: General and site recipe models and representation

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2009
Nadzor šarže - 3. del: Splošni in prilagojeni recepturni modeli in njihove
predstavitve (IEC 61512-3:2008)
Batch control -- Part 3: General and site recipe models and representation
Chargenorientierte Fahrweise -- Teil 3: Modelle und Darstellungen von Verfahrens- und
Werksrezepten
Contrôle-commande des processus de fabrication par lots -- Partie 3: Modèles et
représentation des recettes générales et des recettes de site
Ta slovenski standard je istoveten z: EN 61512-3:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61512-3
NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM
ICS 25.040.40; 35.240.50
English version
Batch control -
Part 3: General and site recipe models and representation
(IEC 61512-3:2008)
Contrôle-commande des processus  Chargenorientierte Fahrweise -
de fabrication par lots - Teil 3: Modelle und Darstellungen
Partie 3: Modèles et représentation von Verfahrens- und Werksrezepten
des recettes générales (IEC 61512-3:2008)
et des recettes de site
(CEI 61512-3:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61512-3:2008 E
Foreword
The text of document 65A/496/CDV, future edition 1 of IEC 61512-3, prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61512-3 on 2008-08-01.
EN 61512-3 is to be used in conjunction with EN 61512-1 and EN 61512-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61512-3:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61512-3:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-351 2006 International Electrotechnical Vocabulary - -
(IEV) -
Part 351: Control technology
IEC 61512-1 1997 Batch control - EN 61512-1 1999
Part 1: Models and terminology

IEC 61512-2 2001 Batch control - EN 61512-2 2002
Part 2: Data structures and guidelines for
languages
IEC 62264-1 2003 Enterprise-control system integration - EN 62264-1 2008
Part 1: Models and terminology

IEC 62264-2 2004 Enterprise-control system integration - EN 62264-2 2008
Part 2: Object model attributes

ISO/IEC 19501 2005 Information technology - Open Distributed - -
Processing - Unified Modeling Language
(UML)
IEC 61512-3
Edition 1.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Batch control –
Part 3: General and site recipe models and representation

Contrôle-commande des processus de fabrication par lots –
Partie 3: Modèles et représentation des recettes générales et des recettes de site

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XB
CODE PRIX
ICS 25.040.40; 35.240.50 ISBN 2-8318-9872-2
– 2 – 61512-3 © IEC:2008
CONTENTS
FOREWORD.6
INTRODUCTION.8
1 Scope.9
2 Normative references .9
3 Terms, definitions and abbreviations .9
3.1 Terms and definitions .9
3.2 Abbreviation .10
4 Recipe description.10
4.1 Recipe types .10
4.2 General and site recipe description .10
4.2.1 Manufacturing information .10
4.2.2 Multiple site definitions .10
4.2.3 Expansion and collapsing of the recipe type hierarchy.11
4.3 Equipment-independent recipes .11
4.3.1 Equipment-independent recipe subtypes .11
4.3.2 Activities of equipment-independent recipes .11
4.3.3 Input to trial or pilot production .12
4.3.4 Output from trial or pilot production .13
4.3.5 Control of equipment-independent recipes.13
4.3.6 Equipment-independent recipe definition .14
4.3.7 Equipment-independent recipe variants .14
4.3.8 Source of scheduling information.14
4.3.9 Equipment-independent recipes and business information.14
4.3.10 Equipment-independent recipes for capability comparison.15
4.3.11 Equipment-independent recipes as facility design specifications.15
4.4 General recipes.15
4.4.1 Enterprise-wide definition .15
4.4.2 Purpose of a general recipe.16
4.4.3 General recipe information .16
4.5 Site recipes .17
4.5.1 Site-specific recipes .17
4.5.2 Site recipe definition.17
4.5.3 Site recipe policies .18
4.6 Product families and product grades.18
4.6.1 Product definition .18
4.6.2 Product families.18
4.6.3 Product grades .18
5 Equipment-independent recipe contents .19
5.1 Recipe information .19
5.2 Recipe life cycle states.19
5.3 Recipe header.19
5.4 Recipe formula .19
5.5 Recipe procedure .19
5.5.1 Process model.19
5.5.2 Process hierarchy.20
5.5.3 Ideal procedure for manufacture .20

61512-3 © IEC:2008 – 3 –
5.5.4 Process stage.20
5.5.5 Process operation.21
5.5.6 Process action.21
5.5.7 Definition of equipment requirements.21
5.5.8 Process stage guidelines.21
5.5.9 Process operation guidelines.22
5.5.10 Process action guidelines .23
5.5.11 Process action types .24
5.6 Equipment requirements.27
5.6.1 Requirements of final manufacturing equipment .27
5.6.2 Equipment selection .27
5.6.3 Constraining target equipment.27
5.6.4 Managing equipment requirement definitions .27
5.7 Other information .27
5.8 Life cycle states .28
6 Equipment-independent recipe object model .28
6.1 General .28
6.2 Modelling techniques.28
6.3 Object model .28
6.4 Object relationships.29
6.5 Object model elements .30
6.5.1 Attributes.30
6.5.2 Equipment-independent recipe .30
6.5.3 Equipment requirement.30
6.5.4 Equipment requirement element .30
6.5.5 Equipment requirement library.31
6.5.6 General recipe.31
6.5.7 Material definition .31
6.5.8 Material definition library .31
6.5.9 Other information.31
6.5.10 Pe
...