EN 60034-4:2008

Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests

IEC 60034-4:2008 applies to three-phase synchronous machines of 1 kVA rating and larger with rated frequency of not greater than 500 Hz and not less than 10 Hz. The main changes with respect to the previous edition are as follows: - removal of certain tests for lack of relevance in current practise; - addition of provisions for tests on machines with brushless excitation; - addition of a table of test methods indicating preferred tests and cross-references.

Drehende elektrische Maschinen - Teil 4: Verfahren zur Ermittlung der Kenngrößen von Synchronmaschinen durch Messungen

Machines électriques tournantes - Partie 4: Méthodes pour la détermination, à partir d'essais, des grandeurs des machines synchrones

La CEI 60034-4:2008 est applicable aux machines synchrones triphasées dont la puissance assignée est supérieure ou égale à 1 kVA et dont la fréquence assignée est comprise entre 10 Hz au moins et 500 Hz au plus. Les principales modifications apportées à l'édition précédente sont les suivantes: - suppression de certains essais du fait d'un manque de pertinence dans la pratique; - ajout de dispositions pour les essais sur des machines à excitation sans balais; - ajout d'un tableau des méthodes d'essai indiquant les essais préférentiels et les références.

Električni rotacijski stroji - 4. del: Metode za preskusno ugotavljanje veličin sinhronskih strojev (IEC 60034-4:2008)

General Information

• Status: Withdrawn
• Publication Date: 10-Sep-2008
• Withdrawal Date: 30-Jun-2011
• ICS: 29.160 - Rotating machinery
• Technical Committee: CLC/TC 2 - Rotating machinery
• Drafting Committee: IEC/TC 2 - IEC_TC_2
• Parallel Committee: IEC/TC 2 - IEC_TC_2
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jun-2021
• Completion Date: 01-Jun-2021
• Ref Project: SIST EN 60034-4:2008 - Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests (IEC 60034-4:2008)

Relations

• Replaces: EN 60034-4:1995 - Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60034-4-1:2018 - Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-4:2008
01-december-2008
1DGRPHãþD
SIST EN 60034-4:1999
(OHNWULþQLURWDFLMVNLVWURMLGHO0HWRGH]DSUHVNXVQRXJRWDYOMDQMHYHOLþLQ
VLQKURQVNLKVWURMHY,(&
Rotating electrical machines - Part 4: Methods for determining synchronous machine
quantities from tests (IEC 60034-4:2008)
Drehende elektrische Maschinen - Teil 4: Verfahren zur Ermittlung der Kenngrößen von
Synchronmaschinen durch Messungen (IEC 60034-4:2008)
Machines électriques tournantes - Partie 4: Méthodes pour la détermination, à partir
d'essais, des grandeurs des machines synchrones (CEI 60034-4:2008)
Ta slovenski standard je istoveten z: EN 60034-4:2008
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-4:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60034-4:2008

---------------------- Page: 2 ----------------------

SIST EN 60034-4:2008

EUROPEAN STANDARD
EN 60034-4

NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM

ICS 29.160 Supersedes EN 60034-4:1995


English version


Rotating electrical machines -
Part 4: Methods for determining synchronous machine quantities
from tests
(IEC 60034-4:2008)


Machines électriques tournantes -  Drehende elektrische Maschinen -
Partie 4: Méthodes pour la détermination, Teil 4: Verfahren zur Ermittlung
à partir d'essais, des grandeurs der Kenngrößen von Synchronmaschinen
des machines synchrones durch Messungen
(CEI 60034-4:2008) (IEC 60034-4:2008)




This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60034-4:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60034-4:2008
EN 60034-4:2008 - 2 -
Foreword
The text of document 2/1488/FDIS, future edition 3 of IEC 60034-4, prepared by IEC TC 2, Rotating
machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60034-4 on 2008-07-01.
This European Standard supersedes EN 60034-4:1995.
The main changes with respect to EN 60034-4:1995 are listed below:
– tests described in supplement A of EN 60034-4:1995 were partly removed for lack of relevance in
current practice;
– provisions were made for tests on machines with brushless excitation;
– a table of test methods indicates preferred tests, and a test cross-reference is provided;
– the conventional two-axes salient-pole machine model description was added in an annex.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2009-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60034-4:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60034-4:2008
- 3 - EN 60034-4:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an interna
...