FprEN IEC 63522-36:2024
(Main)Electrical relays - Tests and measurements - Part 36: Fire hazard
Electrical relays - Tests and measurements - Part 36: Fire hazard
Elektrische Relais – Mess- und Prüfverfahren – Teil 36: Entflammbarkeit
Relais électriques - Essais et mesurages - Partie 36: Danger d'incendie
Električni releji - Preskusi in meritve - 7-36. del: Požarna ogroženost
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-36:2023
01-oktober-2023
Električni releji - Preskusi in meritve - 7-36. del: Požarna ogroženost
Electrical relays - Tests and Measurements - Part 7-36: Fire hazard
Ta slovenski standard je istoveten z: prEN IEC 61810-7-36:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-36:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 61810-7-36:2023
oSIST prEN IEC 61810-7-36:2023
94/938/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-36 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-08-25 2023-11-17
SUPERSEDES DOCUMENTS:
94/844/CD, 94/929/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me Countries” clauses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC cl auses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays – Tests and Measurements – Part 7-36: Fire hazard
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 61810-7-36:2023
94/938/CDV - 1 - IEC CDV 61810-7-36 © IEC: 2023
1 CONTENTS
3 FOREWORD. - 2 -
4 1 Scope . - 4 -
5 2 Normative references . - 4 -
6 3 Terms and definitions . - 4 -
7 4 Test procedure . - 4 -
8 4.1 General . - 4 -
9 4.2 Glow-wire Test. - 5 -
10 4.2.1 Purpose . - 5 -
11 4.2.2 Procedure . - 5 -
12 4.2.3 Conditions to be specified . - 5 -
13 4.3 Needle flame test . - 6 -
14 4.3.1 Purpose . - 6 -
15 4.3.2 Procedure . - 6 -
16 4.3.3 Conditions to be specified . - 6 -
17 5 Evaluation . - 6 -
18 5.1 Glow-wire test . - 6 -
19 5.1.1 Glow-wire flammability test for end-products . - 6 -
20 5.1.2 Glow-wire flammability index （GWFI）test for materials . - 6 -
21 5.1.3 Glow-wire ignition temperature（GWIT）test for materials . - 6 -
22 5.2 Needle flame test . - 6 -
23 Annex T . - 7 -
24 Bibliography . - 8 -
oSIST prEN IEC 61810-7-36:2023
94/938/CDV - 2 - IEC CDV 61810-7-36 © IEC: 2023
29 INTERNATIONAL ELECTROTECHNICAL COMMISSION
30 ____________
31 Electrical relays – Tests and Measurements –
32 Part 7-36: Fire hazard
33 FOREWORD
34 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
35 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -
36 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
37 addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
38 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
39 is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
40 participate in this preparatory work. International, governmental and non-governmental organizations liaising with
41 the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
42 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
43 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
44 consensus of opinion on the relevant subjects since each technical committee has representation from all interested
45 IEC National Committees.
46 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
47 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
48 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
49 misinterpretation by any end user.
50 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
51 transparently to the maximum extent possible in their national and regional publications. Any divergence between
52 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
53 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
54 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
55 carried out by independent certification bodies.
56 6) All users should ensure that they have the latest edition of this publication.
57 7) No liability shall attach to IEC or its directors, employees, servants or agents including in dividual experts and
58 members of its technical committees and IEC National Committees for any personal injury, property damage or
59 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
60 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
61 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
62 indispensable for the correct application of this publication.
63 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
64 rights. IEC shall not be held responsible for identifying any or all such patent rights.
65 The International Standards of the IEC 61810 have been prepared by IEC technical committee
66 94: All-or-nothing electrical relays.
67 This document is a CDV based on the observations of CC files on 94_844e_CD. The red text has
68 changed from the document of 94_844e_CD.
69 The text of this International Standard is based on the following documents:
CD CC
94/844/CD 94/929/CC
71 Full information on the voting for the approval of this International Standard can be found in the
72 report on voting indicated in the above table.
73 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
oSIST prEN IEC 61810-7-36:2023
94/938/CDV - 3 - IEC CDV 61810-7-36 © IEC: 2023
74 A list of all parts of IEC 61810 series, published under the general title Electromechanical
75 elementary relays, can be found on the IEC website.
76 This International Standard is to be
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.