EN IEC 60794-1-122:2026
(Main)Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22
- Status
- Not Published
- Publication Date
- 03-Dec-2026
- Technical Committee
- CLC/TC 86A - Optical fibres and optical fibre cables
- Current Stage
- 5060 - Voting results sent to TC, SR - Formal Approval
- Start Date
- 02-Oct-2026
- Completion Date
- 02-Oct-2026
EN IEC 60794-1-122:2026 is a CLC standard for optical fibre cables. It specifies Method E22 for checking buffered fibre movement under compression in optical fibre cables for use in patch cords, so users can compare attenuation change and reaction force in a consistent way.
It is aimed at people who specify, design, manufacture, test, or buy these cables. The method is relevant to telecommunications equipment and similar devices, including cables that combine optical fibres and electrical conductors.
What does EN IEC 60794-1-122:2026 specify?
EN IEC 60794-1-122:2026 specifies a mechanical test method for buffered fibre movement under axial compression in cables used for patch cords. Clause 1 says the method applies to optical fibre cables for telecommunication equipment and devices using similar techniques, as well as cables with both optical fibres and electrical conductors.
The document is organized into scope, normative references, terms and definitions, and Method 4. Method 4 is split into the test object, sample, apparatus, procedure, requirements, details to be specified, and details to be reported. Figure 1 shows the test set-up.
What are the key requirements of EN IEC 60794-1-122:2026?
Test purpose and sample
Clause 4.1 says the test examines attenuation behaviour and reaction force when a buffered fibre moves under axial compression only. In practice, this tells a test lab whether compression causes optical loss or mechanical response that matters for patch cord use.
Clause 4.2 requires a 5.0 m cable sample from a finished cable length, with 2.0 m removed from each end and a 1.0 m central sheathed section left. This standardizes the specimen so results from different cables or suppliers can be compared.
Apparatus and set-up
Clause 4.3 specifies a fixed cable end, a movable chuck for the buffered fibre, a load cell with maximum error of ±3 %, and attenuation monitoring equipment such as a power meter. In practice, the test needs both optical and mechanical measurement at the same time.
The chuck-to-cable-end distance is fixed at 7 mm. Figure 1 shows how the cable fixing point, fibre chuck, load cell, and attenuation monitoring equipment are arranged.
Procedure and acceptance
Clause 4.4 requires standard atmospheric conditions from IEC 60794-1-2. The compression distance is 1.0 m or a value stated in the relevant detailed specification, and the chuck movement rate also comes from that specification.
Clause 4.4 also requires the far end of the sample to be fixed so the buffered fibre cannot move within the cable sample, while the unsheathed fibres are connected to the attenuation monitoring equipment. If multiple movements are specified, the chuck is returned to the start position and the cycle is repeated.
Clause 4.5 says the change in attenuation and the reaction force at the specified distance shall not exceed the values in the relevant specification. The pass or fail limit therefore comes from the product specification, not from this method alone.
What must be specified and reported
Clauses 4.6 and 4.7 require the detailed specification to state the compression distance, the maximum allowable change in attenuation, the number of movements, and the maximum allowable reaction force. The test report must include those items, plus the cable sample description, measured reaction force and distance, measured change in attenuation, and any deviations from the method. That gives quality teams the traceability needed for release, qualification, or dispute resolution.
What terms does EN IEC 60794-1-122:2026 define?
EN IEC 60794-1-122:2026 uses the terms and definitions from IEC 60794-1-1. Key terms in this method are:
- Buffered fibre - the fibre whose movement under compression is being checked.
- Attenuation - the optical loss monitored during the test to see whether compression affects transmission.
- Reaction force - the force measured at the chuck as the fibre moves.
- Compression distance - the distance the chuck is driven toward the fixed cable end.
- Detailed specification - the product-specific document that sets the required test settings and acceptance limits.
Who uses EN IEC 60794-1-122:2026?
EN IEC 60794-1-122:2026 is used by cable manufacturers, test laboratories, quality teams, and technical buyers working with optical fibre cables for patch cords. It is useful when qualifying a design, checking production consistency, or writing a procurement or acceptance specification.
It also supports organizations that need to document test conditions and results in a repeatable way. That matters when comparing suppliers, validating cable behaviour, or investigating a failure related to compression and fibre movement.
What changed in EN IEC 60794-1-122:2026 from the previous edition?
EN IEC 60794-1-122:2026 is a technical revision that cancels and replaces Method E22 of IEC 60794-1-21:2015. The stated technical change is the addition of clause 4.7, “Details to be reported”.
Which standards are used with EN IEC 60794-1-122:2026?
- IEC 60794-1-1 - provides the general terms and definitions used by this document.
- IEC 60794-1-2 - provides general guidance for basic optical cable test procedures and the standard atmospheric conditions used in the test.
- IEC 60793-1-46 - provides the attenuation monitoring method used during the compression test.
What does the EN IEC 60794-1-122:2026 document contain?
The document contains one mechanical test method, Method E22, supported by Figure 1. It sets out the purpose of the test, the sample preparation, the apparatus, the procedure, the acceptance requirement, and the information that must be specified and reported.
It also gives the test set-up for the cable fixing point, fibre chuck, load cell, and attenuation monitoring equipment. For users, that means the document is mainly a practical test procedure for design validation, product qualification, and test reporting.
Relations
- Effective Date
- 09-Sep-2025
- Effective Date
- 09-Sep-2025
- Effective Date
- 17-Nov-2026
- Effective Date
- 17-Nov-2026
Get Certified
Connect with accredited certification bodies for this standard

ANCE
Mexican certification and testing association.

Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.

LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
EN IEC 60794-1-122:2026 is a draft published by CLC. Its full title is "Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22". This standard covers: Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22
Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22
EN IEC 60794-1-122:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 60794-1-122:2026 has the following relationships with other standards: It is inter standard links to EN 60794-1-21:2015, EN 60794-1-21:2015/A1:2020, EN IEC 60794-1-1:2023, EN IEC 60794-1-2:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN IEC 60794-1-122:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-122:2025
01-maj-2025
Optični kabli - 1-122. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Premik zaščitenih vlaken pod
pritiskom v optičnih kablih za uporabo v preveznih vrvicah, metoda E22
Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Buffered fibre movement under compression in
optical fibre cables for use in patch cords, Method E22
Câbles à fibres optiques - Partie 1-122: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques -
Mouvement des fibres sous revêtement protecteur sous l’effet d’une compression dans
les câbles à fibres optiques utilisés comme cordons de brassage, Méthode E22
Ta slovenski standard je istoveten z: prEN IEC 60794-1-122
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-122:2025 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60794-1-122:2025
oSIST prEN IEC 60794-1-122:2025
86A/2545/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-122 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-03-21 2025-06-13
SUPERSEDES DOCUMENTS:
86A/2476/CD, 86A/2543/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables
for use in patch cords, Method E22
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 60794-1-122:2025
IEC CDV 60794-1-122 ED1 © IEC 2025 2 86A/2545/CDV
1 CONTENTS
4 FOREWORD . 3
5 1 Scope . 5
6 2 Normative references . 5
7 3 Terms and definitions . 5
8 4 Method . 5
9 4.1 Object . 5
10 4.2 Sample . 5
11 4.3 Apparatus . 5
12 4.4 Procedure . 6
13 4.5 Requirements . 7
14 4.6 Details to be specified . 7
15 4.7 Details to be reported . 7
19 Figure 1 – Test set-up for fibre movement under compression . 6
oSIST prEN IEC 60794-1-122:2025
IEC CDV 60794-1-122 ED1 © IEC 2025 3 86A/2545/CDV
21 INTERNATIONAL ELECTROTECHNICAL COMMISSION
22 ____________
24 OPTICAL FIBRE CABLES
25 Part 1-122: Generic specification - Basic optical cable test procedures–
26 Mechanical test methods - Buffered fibre movement under compression in
27 optical fibre cables for use in patch cords, Method E22
29 FOREWORD
31 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
32 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
33 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
34 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
35 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
36 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
37 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
38 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
39 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
40 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
41 consensus of opinion on the relevant subjects since each technical committee has representation from all
42 interested IEC National Committees.
43 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
44 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
45 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
46 misinterpretation by any end user.
47 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
48 transparently to the maximum extent possible in their national and regional publications. Any divergence between
49 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
50 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
51 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
52 services carried out by independent certification bodies.
53 6) All users should ensure that they have the latest edition of this publication.
54 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
55 members of its technical committees and IEC National Committees for any personal injury, property damage or
56 other damage of
...



