Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts

IEC 61810-3:2015 specifies special requirements and tests for elementary relays with forcibly guided contacts, also known as mechanically linked contacts. These special requirements apply in addition to the general requirements of IEC 61810-1.

Elektromechanische Elementarrelais - Teil 3: Relais mit (mechanisch) zwangsgeführten Kontakten

Relais électromécaniques élémentaires - Partie 3: Relais à contacts guidés (liés mécaniquement)

L'IEC 61810-3:2015 spécifie les exigences et essais particuliers pour les relais élémentaires à contacts guidés, également connus sous le nom de contacts liés mécaniquement. Ces exigences particulières s'appliquent en plus des exigences générales de l'IEC 61810-1.

Releji s prisilnim vodenjem (mehansko povezanih) kontaktov (IEC 61810-3:2015)

Ta del standarda IEC 61810 določa posebne zahteve in preskuse za osnovne releje s prisilnim vodenjem kontaktov, znanih tudi kot mehansko povezani kontakti. Te posebne zahteve se uporabljajo poleg splošnih zahtev iz standarda IEC 61810-1.
OPOMBA 1: Ta standard se ne uporablja za elektromehanske krmilne naprave iz standarda IEC 60947-5-1.
OPOMBA 2: Standard IEC 61810-2-1 zagotavlja smernice za ocenjevanje vrednosti zanesljivosti.
OPOMBA 3: Kontakti, ki niso mehansko povezani (s prisilnim vodenje), niso obravnavani v tem standardu.

General Information

Status
Published
Publication Date
09-Apr-2015
Withdrawal Date
31-Mar-2018
Current Stage
6060 - Document made available - Publishing
Start Date
10-Apr-2015
Completion Date
10-Apr-2015

Relations

Buy Standard

Standard
EN 61810-3:2015
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61810-3:2015
01-september-2015
1DGRPHãþD
SIST EN 50205:2002
Releji s prisilnim vodenjem (mehansko povezanih) kontaktov (IEC 61810-3:2015)
Relays with forcibly guided (mechanically linked) contacts (IEC 61810-3:2015)
Elektromechanische Elementarrelais - Teil 3: Relais mit (mechanisch) zwangsgeführten
Kontakten (IEC 61810-3:2015)
Relais électromécaniques élémentaires - Partie 3: Relais à contacts guidés (liés
mécaniquement) (IEC 61810-3:2015)
Ta slovenski standard je istoveten z: EN 61810-3:2015
ICS:
29.120.70 Releji Relays
SIST EN 61810-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61810-3:2015

---------------------- Page: 2 ----------------------

SIST EN 61810-3:2015


EUROPEAN STANDARD EN 61810-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2015
ICS 29.120.70 Supersedes EN 50205:2002
English Version
Electromechanical elementary relays -
Part 3: Relays with forcibly guided (mechanically linked) contacts
(IEC 61810-3:2015)
Relais électromécaniques élémentaires -  Elektromechanische Elementarrelais -
Partie 3: Relais à contacts guidés (liés mécaniquement) Teil 3: Relais mit (mechanisch) zwangsgeführten Kontakten
(IEC 61810-3:2015) (IEC 61810-3:2015)
This European Standard was approved by CENELEC on 2015-04-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61810-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61810-3:2015
EN 61810-3:2015 - 2 -
Foreword
The text of document 94/378/FDIS, future edition 1 of IEC 61810-3, prepared by
IEC/TC 94 “All-ornothing electrical relays” was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61810-3:2015.

The following dates are fixed:
(dop) 2016-01-01
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-04-01
standards conflicting with the
document have to be withdrawn

This document supersedes EN 50205:2002.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61810-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 61810-2-1 NOTE Harmonized as EN 61810-2-1.

---------------------- Page: 4 ----------------------

SIST EN 61810-3:2015
- 3 - EN 61810-3:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 60947-5-1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.