EN 60793-2-50:2004
(Main)Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
Applicable to optical fibre types B1.1, B1.2, B1.3, and categories B2 and B4. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres: General requirements, as defined in EN 60793-2; Specific requirements common to the class B single-mode fibres covered in this standard and which are given in Clause 3; Particular requirements applicable to individual fibre types or specific applications, which are defined in the family specifications of Annexes A to E.
Lichtwellenleiter - Teil 2-50: Produktspezifikationen - Rahmenspezifikation für Einmodenfasern der Kategorie B
Fibres optiques - Partie 2-50: Spécifications de produits - Spécification intermédiaire pour les fibres unimodales de classe B
S'applique aux fibres optiques de type B1.1, B1.2, B1.3, et de catégorie B2, et B4. Elle couvre des prescriptions communes aux fibres unimodales de class B. Elle couvre aussi des prescriptions particulières applicables à des types particuliers de fibres et à des applications données.
Optična vlakna – 2-50. del: Specifikacije izdelka - Področna specifikacija za enorodna vlakna razreda B (IEC 60793-2-50:2004)*
General Information
Relations
Standards Content (Sample)
EUROPEAN STANDARD EN 60793-2-50
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2004
ICS 33.180.10 Supersedes EN 60793-2-50:2002
Incorporates Corrigendum July 2004
English version
Optical fibres
Part 2-50 : Product specifications -
Sectional specification for
class B single-mode fibres
(IEC 60793-2-50:2004)
Fibres optiques Lichtwellenleiter
Partie 2-50: Spécifications de produits - Teil 2-50: Produktspezifikationen -
Spécification intermédiaire Rahmenspezifikation für Einmodenfasern
pour les fibres unimodales de classe B der Kategorie B
(CEI 60793-2-50:2004) (IEC 60793-2-50:2004)
This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-2-50:2004 E
Foreword
The text of document 86A/880/FDIS, future edition 2 of IEC 60793-2-50, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60793-2-50 on 2004-04-01.
This European Standard supersedes EN 60793-2-50:2002.
The principle change relative to EN 60793-2-50:2002 is the addition of environmental testing
requirements. Additionally, the requirements in Annex C have been clarified.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
The contents of the corrigendum of July 2004 have been included in this copy.
__________
Endorsement notice
The text of the International Standard IEC 60793-2-50:2004 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60793-2-50:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-1-20 2001 Optical fibres EN 60793-1-20 2002
Part 1-20: Measurement methods and
test procedures - Fibre geometry
IEC 60793-1-21 2001 Part 1-21: Measurement methods and EN 60793-1-21 2002
test procedures - Coating geometry
IEC 60793-1-22 2001 Part 1-22: Measurement methods and EN 60793-1-22 2002
test procedures - Length measurement
IEC 60793-1-30 2001 Part 1-30: Measurement methods and EN 60793-1-30 2002
test procedures - Fibre proof test
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.