EN 61300-1:2016

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

IEC 61300-1:2016 provides general information and guidance for the basic test and measurement procedures defined in the IEC 61300-2 and IEC 61300-3 series for interconnecting devices and passive components. This standard should be used in combination with the relevant specification which will define the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this basic standard and the relevant specification, the latter will take precedence. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: reconsideration of the terms and definitions; addition of Clause 4. Keywords: test and measurement procedures for interconnecting devices and passive components

Lichtwellenleiter -Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 1: Allgemeines und Leitfaden

Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 1: Généralités et lignes directrices

L'IEC 61300-1:2016 donne des informations d'ordre général et des lignes directrices concernant les procédures fondamentales d'essais et de mesures définies dans les séries IEC 61300-2 et IEC 61300-3 et applicables aux dispositifs d'interconnexion et aux composants passifs. Il convient d'utiliser la présente norme avec la spécification particulière qui définit les essais à réaliser, le degré de sévérité exigé pour chacun d'eux, l'ordre dans lequel ils sont effectués, le cas échéant, et les limites des performances admissibles. Si la présente norme fondamentale et la spécification particulière sont en contradiction, c'est cette dernière qui prévaut. Cette quatrième édition annule et remplace la troisième édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: révision des termes et définitions; ajout de l'Article 4. Mots clés : procédures d'essais et de mesures pour dispositifs d'interconnexion et aux composants passifs

Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in merjenja - 1. del: Splošno in smernice (IEC 61300-1:2016)

Ta del standarda IEC 61300 podaja splošne informacije in smernice za postopke osnovnega preskušanja in merjenja, opredeljene v skupinah standardov IEC 61300-2 in IEC 61300-3, za spojne elemente in pasivne komponente.
Ta standard naj bi se uporabljal v kombinaciji z ustrezno specifikacijo, ki bo opredelila preskuse, ki jih je treba uporabiti, zahtevano stopnjo za vsakega od njih, njihovo zaporedje, če je pomembno, in dovoljene mejne vrednosti. V primeru neskladij med tem osnovnim standardom in ustrezno specifikacijo ima prednost specifikacija.

General Information

• Status: Withdrawn
• Publication Date: 08-Dec-2016
• Withdrawal Date: 08-Dec-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 09-May-2023
• Completion Date: 09-May-2023
• Ref Project: SIST EN 61300-1:2017 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:2016)

Relations

• Replaces: EN 61300-1:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• Effective Date: 27-Jan-2015
• Replaced By: EN IEC 61300-1:2022 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• Effective Date: 17-May-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-1:2017
01-februar-2017
1DGRPHãþD
SIST EN 61300-1:2011
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3RVWRSNLRVQRYQHJDSUHVNXãDQMD
LQPHUMHQMDGHO6SORãQRLQVPHUQLFH,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 1: General and guidance (IEC 61300-1:2016)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 1: Allgemeines und Leitfaden (IEC 61300-1:2016)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 1: Généralités et lignes directrices (IEC
61300-1:2016)
Ta slovenski standard je istoveten z: EN 61300-1:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-1:2017

---------------------- Page: 2 ----------------------

SIST EN 61300-1:2017


EUROPEAN STANDARD EN 61300-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2016
ICS 33.180.20 Supersedes EN 61300-1:2011
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 1: General and guidance
(IEC 61300-1:2016)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter -Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren -
mesures - Partie 1: Généralités et lignes directrices Teil 1: Allgemeines und Leitfaden
(IEC 61300-1:2016) (IEC 61300-1:2016)
This European Standard was approved by CENELEC on 2016-09-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61300-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61300-1:2017
EN 61300-1:2016
European foreword
The text of document 86B/3992/FDIS, future edition 4 of IEC 61300-1, prepared by SC 86B “Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre Optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-1:2016.

The following dates are fixed:
(dop) 2017-06-09
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-12-09
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61300-1:2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61300-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60068-2-1 NOTE Harmonized as EN 60068-2-1.
IEC 61315 NOTE Harmonized as EN 61315.
IEC 62614 NOTE Harmonized as EN 62614.
2

---------------------- Page: 4 ----------------------

SIST EN 61300-1:2017
EN 61300-1:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are n
...