EN 61069-3:2016

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality

Describes in detail the method to be used to systematically assess the functionality of an industrial-process measurement and control system.

Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck der Eignungsbeurteilung eines Systems - Teil 3: Eignungsbeurteilung der Systemfunktionalität

Mesure, commande et automation dans les processus industriels - Appréciation des propriétés d'un système en vue de son évaluation - Partie 3: Évaluation de la fonctionnalité d’un système

L'IEC 61069-3:2016 spécifie la méthode d'évaluation détaillée de la fonctionnalité d'un système de commande de base (BCS) reposant sur les principes de base de l'IEC 61069-1 et la méthodologie de l'IEC 61069-2; définit la classification de base des propriétés de la fonctionnalité; décrit les facteurs ayant une influence sur la fonctionnalité et qui doivent être pris en compte lors de l'appréciation de la fonctionnalité; donne des lignes directrices concernant les techniques de sélection à partir d'un ensemble d'options (avec références) pour l'appréciation de la fonctionnalité. Cette deuxième édition annule et remplace la première édition parue en 1996. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - Réorganisation des informations contenues dans l'IEC 61069-3:1996 visant à mieux organiser l'ensemble complet de normes et à le rendre plus cohérent; - L'IEC TS 62603-1:2014 a été incorporée dans cette édition.

Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ocenjevanje lastnosti sistema zaradi njegovega vrednotenja - 3. del: Vrednotenje funkcionalnosti sistema (IEC 61069-3:2016)

Podrobno opisuje metodo za sistematično vrednotenje funkcionalnosti meritev in krmiljenja v industrijskih procesih.

General Information

• Status: Published
• Publication Date: 27-Oct-2016
• Withdrawal Date: 27-Oct-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Oct-2016
• Completion Date: 28-Oct-2016
• Ref Project: SIST EN 61069-3:2017 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality (IEC 61069-3:2016)

Relations

• Replaces: EN 61069-3:1996 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
• Effective Date: 07-Apr-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2017
1DGRPHãþD
SIST EN 61069-3:1998
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ocenjevanje
lastnosti sistema zaradi njegovega vrednotenja - 3. del: Vrednotenje
funkcionalnosti sistema (IEC 61069-3:2016)
Industrial-process measurement, control and automation - Evaluation of system
properties for the purpose of system assessment - Part 3: Assessment of system
functionality (IEC 61069-3:2016)
Leittechnik für industrielle Prozesse - Ermittlung der Systemeigenschaften zum Zweck
der Eignungsbeurteilung eines Systems - Teil 3: Eignungsbeurteilung der
Systemfunktionalität (IEC 61069-3:2016)
Mesure, commande et automation dans les processus industriels - Appréciation des
propriétés d'un système en vue de son évaluation - Partie 3: Évaluation de la
fonctionnalité d'un système (IEC 61069-3:2016)
Ta slovenski standard je istoveten z: EN 61069-3:2016
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61069-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2016
ICS 25.040.40 Supersedes EN 61069-3:1996
English Version
Industrial-process measurement, control and automation -
Evaluation of system properties for the purpose of system
assessment - Part 3: Assessment of system functionality
(IEC 61069-3:2016)
Mesure, commande et automation dans les processus Leittechnik für industrielle Prozesse - Ermittlung der
industriels - Appréciation des propriétés d'un système en Systemeigenschaften zum Zweck der Eignungsbeurteilung
vue de son évaluation - Partie 3: Évaluation de la eines Systems - Teil 3: Eignungsbeurteilung der
fonctionnalité d'un système Systemfunktionalität
(IEC 61069-3:2016) (IEC 61069-3:2016)
This European Standard was approved by CENELEC on 2016-07-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61069-3:2016 E
European foreword
The text of document 65A/791/FDIS, future edition 2 of IEC 61069-3, prepared by SC 65A “System
aspects” of IEC/TC 65 “Industrial-process measurement, control and automation” was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61069-3:2016.

The following dates are fixed:
(dop) 2017-04-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-10-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61069-3:1996.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61069-3:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61069-5:2016 NOTE Harmonized as EN 61069-5:2016 (not modified).
IEC 61131-3 NOTE Harmonized as EN 61131-3.
IEC 61158 Series NOTE Harmonized as EN 61158 Series.
IEC 61297 NOTE Harmonized as EN 61297.
IEC 61512 Series NOTE Harmonized as EN 61512 Series.
IEC 61784 Series NOTE Harmonized as EN 61784 Series.
IEC/TS 62603-1:2014 NOTE Harmonized as CLC/TS 62603-1:2014.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 61069-1 2016 Industrial-process measurement, control EN 61069-1 2016
and automation - Evaluation of system
properties for the purpose of system
assessment -
Part 1: Terminology and basic concepts
IEC 61069-2 2016 Industrial-process measurement, control EN 61069-2 2016
and automation - Evaluation of system
properties for the purpose of system
assessment -
Part 2: Assessment methodology

IEC 61069-3 ®
Edition 2.0 2016-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial-process measurement, control and automation – Evaluation of system

properties for the purpose of system assessment –

Part 3: Assessment of system functionality

Mesure, commande et automation dans les processus industriels – Appréciation

des propriétés d'un système en vue de son évaluation –

Partie 3: Évaluation de la fonctionnalité d’un système

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40 ISBN 978-2-8322-3409-9

− 2 − IEC 61069-3:2016  IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references. 8
3 Terms, definitions, abbreviated terms, acronyms, conventions and symbols . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms, acronyms, conventions and symbols . 8
4 Basis of assessment specific to functionality . 9
4.1 Functionality properties . 9
4.1.1 General . 9
4.1.2 Coverage . 9
4.1.3 Configurability . 10
4.1.4 Flexibility . 11
4.2 Factors influencing functionality . 12
5 Assessment method . 12
5.1 General . 12
5.2 Defining the objective of the assessment . 12
5.3 Design and layout of the assessment . 12
5.4 Planning of the assessment program . 13
5.5 Execution of the assessment . 13
5.6 Reporting of the assessment . 13
6 Evaluation techniques . 13
6.1 General . 13
6.2 Analytical evaluation techniques . 13
6.2.1 Coverage . 13
6.2.2 Configurability . 14
6.2.3 Flexibility . 14
6.3 Empirical evaluation techniques. 14
6.4 Additional topics for evaluation techniques . 14
Annex A (informative) Checklist and/or example of SRD for system functionality . 15
Annex B (informative) Checklist and/or example of SSD for system functionality . 16
B.1 SSD information . 16
B.2 Check points for system functionality . 16
Annex C (informative) Example of a list of assessment items (information from IEC TS
62603-1). 17
C.1 Overview. 17
C.2 System characteristics . 17
C.2.1 Overview . 17
C.2.2 System scalability . 17
C.2.3 System expandability . 17
C.2.4 Integration of subsystems . 17
C.2.5 Automatic documentation . 17
C.2.6 Programming languages for control . 18
C.2.7 BCS localisation . 19
C.3 Functionality properties . 20

IEC 61069-3:2016  IEC 2016 − 3 −
C.3.1 Input/output specifications . 20
C.3.2 Conventional input/output . 20
C.3.3 Input/output from/to smart devices . 21
C.3.4 Fieldbus connection to the remote I/O . 21
C.3.5 Input validation . 21
C.3.6 Special inputs . 21
C.3.7 Software requirements . 21
C.3.8 Alarm management . 22
C.3.9 Events management. 24
C.3.10 Historical archiving . 25
C.3.11 Trend and statistics management . 26
C.3.12 Communication requirements . 26
C.3.13 Fieldbus . 27
C.3.14 Controller network . 27
C.3.15 Control room netw
...